[Sun Jul 22 10:27:02 2012] Detection parameters:
  Position = (348.5, 217.0) = 13 25 9.66 -43 5 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.1 +/- 10.9
  Background counts = 19.6
  Rate = 0.003 +/- 0.0005

[Sun Jul 22 10:27:02 2012] Off-axis axis estimate = 6.93'
[Sun Jul 22 21:48:41 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 21:48:41 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Sun Jul 22 21:48:41 2012] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.617
[Sun Jul 22 21:48:41 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 9.89"
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src65.ximg exists
[Mon Jul 23 00:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src65.csv
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src65_1.ximg exists
[Mon Jul 23 00:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src65.csv
[Mon Jul 23 00:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Mon Jul 23 00:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src65.csv
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Mon Jul 23 00:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src65.csv
[Mon Jul 23 00:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:54:02 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 12.613588 pixels away
[Mon Jul 23 00:54:02 2012] Warning, spatial fit 65 centroid is now closest to src. 69
[Mon Jul 23 00:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:54:02 2012] Assessing source extent using major
[Mon Jul 23 00:54:02 2012] Source does appear to be extended
[Mon Jul 23 00:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 08:56:29 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:56:29 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Mon Jul 23 08:56:29 2012] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.617
[Mon Jul 23 08:56:29 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 9.89"
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src54.ximg exists
[Mon Jul 23 13:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src54.csv
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon Jul 23 13:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src54.csv
[Mon Jul 23 13:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:09 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon Jul 23 13:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54.csv
[Mon Jul 23 13:51:09 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon Jul 23 13:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54.csv
[Mon Jul 23 13:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:45 2012] Spatial fit model total counts = 739.158000, observed total counts = 756.000000
[Mon Jul 23 13:51:45 2012] Offset between fit and detection position for source 70 = 6.388172 pixels
[Mon Jul 23 13:51:45 2012] Warning, changing simple spatial fit ID from 54 to 39
[Mon Jul 23 13:51:45 2012] 675.324000 total counts/ 181.488000 bgd. counts: snr = 36.657158
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 6.388172 pixels
  Position = (353.5, 221.1) = 13 25 7.70 -43 5 18.8
  Extent = 19.4 (19.4-38.9)", rotation angle = 0
  Source counts = 493.8 +/- 26.0
  Background counts = 181.5
  Rate = 0.02 +/- 0.001
[Mon Jul 23 13:51:45 2012] Source 70 is offset by 1.240598 and -3.185425 pixels which is larger than
2 X fitted extent = 1.396933 x 1.396933, not incorporating fit results
[Mon Jul 23 13:51:45 2012] Source 70 is offset by -0.569218 and 6.330667 pixels which is larger than
2 X fitted extent = 14.790161 x 3.408478, not incorporating fit results
[Mon Jul 23 13:51:45 2012] Source 70 is offset by 4.868680 and 3.429520 pixels which is larger than
2 X fitted extent = 1.137191 x 1.720110, not incorporating fit results
[Mon Jul 23 13:51:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:45 2012] Source does appear to be extended
[Mon Jul 23 13:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 04:59:13 2012] XMMSAS src. selection expression = ellipse(30703.230000, 19184.176000, 1165.986034, 1165.986034, 0.000000, X, Y)
[Tue Jul 24 04:59:13 2012] Writing source region out to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src70_src.reg
[Tue Jul 24 04:59:13 2012] Extracting stamp from image fullrun_mos2_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (286, 154) - (420, 288)
[Tue Jul 24 04:59:13 2012] XMMSAS bgd. selection expression = annulus(30703.230000, 19184.176000, 1943.310056, 3886.620112, X, Y) && !ellipse(26295.382400, 24158.065600, 2027.524858, 2027.524858, 0.000000, X, Y) && !ellipse(30753.422000, 20582.974000, 277.196808, 277.196808, 0.000000, X, Y) && !ellipse(31779.555786, 22247.360748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32154.212280, 17463.936508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28608.534000, 24207.222000, 1207.496035, 1207.496035, 0.000000, X, Y) && !ellipse(26771.086494, 24220.742546, 1695.232049, 1119.132286, 90.000000, X, Y) && !ellipse(28096.934570, 23348.754517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30958.958000, 22650.556380, 559.876016, 559.876016, 0.000000, X, Y) && !ellipse(26230.881744, 22026.289734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29314.204000, 19952.024000, 1438.752041, 1438.752041, 0.000000, X, Y) && !ellipse(33014.101929, 15617.651703, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 04:59:13 2012] Writing fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src70.gif
[Tue Jul 24 05:20:15 2012] Mean detx,y = (1127.70, 6344.94) 
[Tue Jul 24 05:20:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 05:20:57 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 05:20:57 2012] Setting source spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Jul 24 05:20:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Tue Jul 24 06:53:03 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:03 2012] Error reading totcts from fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Jul 24 06:53:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:04 2012] Using photon index=1.80, rate=0.0214, arf fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src70.arf
[Tue Jul 24 06:53:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:04 2012] Updating source flux to 6.5e-13
[Tue Jul 24 06:55:47 2012] Flag b found in src. 70 procflags, skipping spectral fitting