[Sun Jul 22 10:27:01 2012] Detection parameters:
  Position = (334.6, 233.9) = 13 25 15.20 -43 4 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.6 +/- 11.9
  Background counts = 25.4
  Rate = 0.003 +/- 0.0007

[Sun Jul 22 10:27:02 2012] Off-axis axis estimate = 5.37'
[Sun Jul 22 21:48:41 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 21:48:41 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Sun Jul 22 21:48:41 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Sun Jul 22 21:48:41 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 9.11"
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src57.ximg exists
[Mon Jul 23 00:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src57.csv
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src57_1.ximg exists
[Mon Jul 23 00:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src57.csv
[Mon Jul 23 00:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Mon Jul 23 00:53:12 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Mon Jul 23 00:54:02 2012] Spatial fit model total counts = 498.708000, observed total counts = 483.000000
[Mon Jul 23 00:54:02 2012] Offset between fit and detection position for source 66 = 4.918339 pixels
[Mon Jul 23 00:54:02 2012] 499.270000 total counts/ 329.034000 bgd. counts: snr = 9.384930
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 4.918339 pixels
  Position = (337.5, 229.9) = 13 25 14.04 -43 4 40.5
  Extent = 18.0 (17.5-18.2)", rotation angle = 0
  Source counts = 170.2 +/- 22.3
  Background counts = 329.0
  Rate = 0.007 +/- 0.001
[Mon Jul 23 00:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:54:02 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:54:02 2012] Source does appear to be extended
[Mon Jul 23 00:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:54:02 2012] Source is confused with source 69
[Mon Jul 23 08:56:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:56:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 08:56:29 2012] Initial guess for spatial extent in simple fitting = 17.98"
[Mon Jul 23 08:56:29 2012] source mask rpix=4.1, npix_max = 85, mask sum = 76, frac = 0.885
[Mon Jul 23 08:56:29 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 17.98"
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src46.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src46.csv
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src46.csv
[Mon Jul 23 13:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:09 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon Jul 23 13:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Jul 23 13:51:09 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Jul 23 13:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Jul 23 13:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:45 2012] Source 66 is offset by 5.415793 and 0.977632 pixels which is larger than
2 X fitted extent = 1.114179 x 1.114179, not incorporating fit results
[Mon Jul 23 13:51:45 2012] Warning, spatial fit 46 centroid is now closest to src. 70
[Mon Jul 23 13:51:45 2012] Source 66 is offset by -1.848460 and -1.758115 pixels which is larger than
2 X fitted extent = 1.168851 x 1.168851, not incorporating fit results
[Mon Jul 23 13:51:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:45 2012] Source does appear to be extended
[Mon Jul 23 13:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 04:59:13 2012] XMMSAS src. selection expression = ellipse(29314.204000, 19952.024000, 1079.064031, 1079.064031, 0.000000, X, Y)
[Tue Jul 24 04:59:13 2012] Writing source region out to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src66_src.reg
[Tue Jul 24 04:59:13 2012] Extracting stamp from image fullrun_mos2_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (275, 168) - (400, 292)
[Tue Jul 24 04:59:13 2012] XMMSAS bgd. selection expression = annulus(29314.204000, 19952.024000, 1798.440052, 3596.880103, X, Y) && !ellipse(26295.382400, 24158.065600, 2027.524858, 2027.524858, 0.000000, X, Y) && !ellipse(25638.258000, 24619.436000, 1111.152032, 1111.152032, 0.000000, X, Y) && !ellipse(30753.422000, 20582.974000, 277.196808, 277.196808, 0.000000, X, Y) && !ellipse(25174.541168, 23577.158722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31779.555786, 22247.360748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25784.122620, 22706.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.804000, 24433.582000, 1963.752057, 1963.752057, 0.000000, X, Y) && !ellipse(32154.212280, 17463.936508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25416.038000, 23219.938000, 360.772810, 360.772810, 0.000000, X, Y) && !ellipse(28608.534000, 24207.222000, 1207.496035, 1207.496035, 0.000000, X, Y) && !ellipse(26771.086494, 24220.742546, 1695.232049, 1119.132286, 90.000000, X, Y) && !ellipse(28096.934570, 23348.754517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29499.807800, 23983.876200, 534.372815, 534.372815, 0.000000, X, Y) && !ellipse(30958.958000, 22650.556380, 559.876016, 559.876016, 0.000000, X, Y) && !ellipse(24468.622000, 22269.442000, 1251.752036, 1251.752036, 0.000000, X, Y) && !ellipse(26230.881744, 22026.289734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33014.101929, 15617.651703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30703.230000, 19184.176000, 1554.648045, 1554.648045, 0.000000, X, Y)
[Tue Jul 24 04:59:13 2012] Writing fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src66.gif
[Tue Jul 24 05:17:39 2012] Mean detx,y = (440.78, 5172.82) 
[Tue Jul 24 05:17:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 05:18:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 05:18:19 2012] Setting source spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue Jul 24 05:18:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Tue Jul 24 06:53:03 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:03 2012] Error reading totcts from fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue Jul 24 06:53:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:04 2012] Using photon index=1.80, rate=0.00739, arf fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src66.arf
[Tue Jul 24 06:53:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:04 2012] Updating source flux to 9.6e-14
[Tue Jul 24 06:55:47 2012] Flag b found in src. 66 procflags, skipping spectral fitting
[Tue Jul 24 06:55:47 2012] Flag c found in src. 66 procflags, skipping spectral fitting