[Sun Jul 22 10:27:01 2012] Detection parameters:
  Position = (330.5, 239.3) = 13 25 16.82 -43 3 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.5 +/- 12.8
  Background counts = 27.7
  Rate = 0.003 +/- 0.0007

[Sun Jul 22 10:27:02 2012] Off-axis axis estimate = 4.88'
[Sun Jul 22 21:48:41 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 21:48:41 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Sun Jul 22 21:48:41 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Sun Jul 22 21:48:41 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 8.87"
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src59.ximg exists
[Mon Jul 23 00:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src59.csv
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src59_1.ximg exists
[Mon Jul 23 00:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src59.csv
[Mon Jul 23 00:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Mon Jul 23 00:53:12 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Mon Jul 23 00:54:02 2012] Spatial fit model total counts = 498.717000, observed total counts = 481.000000
[Mon Jul 23 00:54:02 2012] Offset between fit and detection position for source 63 = 1.537725 pixels
[Mon Jul 23 00:54:02 2012] 504.455400 total counts/ 447.078000 bgd. counts: snr = 2.713621
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.537725 pixels
  Position = (330.5, 240.8) = 13 25 16.81 -43 3 53.0
  Extent = 10.2 (6.4-17.7)", rotation angle = 0
  Source counts = 57.4 +/- 22.5
  Background counts = 447.1
  Rate = 0.002 +/- 0.001
[Mon Jul 23 00:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:54:02 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:54:02 2012] Source does appear to be extended
[Mon Jul 23 00:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 08:56:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:56:29 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Mon Jul 23 08:56:29 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.931
[Mon Jul 23 08:56:29 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 10.17"
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src48.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src48.csv
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src48.csv
[Mon Jul 23 13:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:09 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Jul 23 13:51:09 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Jul 23 13:51:09 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Mon Jul 23 13:51:45 2012] Warning, spatial fit 48 centroid is now closest to src. 66
[Mon Jul 23 13:51:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:45 2012] Source does appear to be extended
[Mon Jul 23 13:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:51:45 2012] Deleting source due to low Poisson probability 1.0