[Sun Jul 22 10:26:58 2012] Detection parameters:
  Position = (291.8, 285.9) = 13 25 32.19 -43 0 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2136.1 +/- 60.7
  Background counts = 45.1
  Rate = 0.09 +/- 0.003

[Sun Jul 22 10:27:02 2012] Off-axis axis estimate = 1.03'
[Sun Jul 22 21:48:41 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 21:48:41 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Sun Jul 22 21:48:41 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.910
[Sun Jul 22 21:48:41 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.94"
[Mon Jul 23 00:53:10 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jul 23 00:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src2.csv
[Mon Jul 23 00:53:10 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jul 23 00:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src2.csv
[Mon Jul 23 00:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jul 23 00:53:11 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jul 23 00:54:02 2012] Spatial fit model total counts = 8298.750000, observed total counts = 7889.000000
[Mon Jul 23 00:54:02 2012] Offset between fit and detection position for source 6 = 4.187624 pixels
[Mon Jul 23 00:54:02 2012] 7590.210000 total counts/ 4779.180000 bgd. counts: snr = 40.662005
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.187624 pixels
  Position = (295.3, 283.5) = 13 25 30.81 -43 0 47.2
  Extent = 13.9 (13.8-27.8)", rotation angle = 0
  Source counts = 2811.0 +/- 87.1
  Background counts = 4779.2
  Rate = 0.1 +/- 0.004
[Mon Jul 23 00:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:54:02 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:54:02 2012] Source does appear to be extended
[Mon Jul 23 00:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:54:02 2012] Source is confused with source 1
[Mon Jul 23 08:56:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:56:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 08:56:29 2012] Initial guess for spatial extent in simple fitting = 13.89"
[Mon Jul 23 08:56:29 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.898
[Mon Jul 23 08:56:29 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.89"
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src2.csv
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src2.csv
[Mon Jul 23 13:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jul 23 13:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jul 23 13:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jul 23 13:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:45 2012] Source 6 is offset by -7.700069 and 5.231402 pixels which is larger than
2 X fitted extent = 3.096869 x 2.255090, not incorporating fit results
[Mon Jul 23 13:51:45 2012] Source 6 is offset by 4.820414 and -4.030828 pixels which is larger than
2 X fitted extent = 4.220055 x 4.220055, not incorporating fit results
[Mon Jul 23 13:51:45 2012] Source 6 is offset by -1.601057 and 6.898046 pixels which is larger than
2 X fitted extent = 6.851127 x 6.851127, not incorporating fit results
[Mon Jul 23 13:51:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:45 2012] Source does appear to be extended
[Mon Jul 23 13:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 04:59:12 2012] Counts = 2811.030000, rescaling region sizes by 2.000000
[Tue Jul 24 04:59:12 2012] XMMSAS src. selection expression = ellipse(25638.258000, 24619.436000, 1666.728048, 1666.728048, 0.000000, X, Y)
[Tue Jul 24 04:59:12 2012] Writing source region out to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src6_src.reg
[Tue Jul 24 04:59:12 2012] Extracting stamp from image fullrun_mos2_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (199, 188) - (391, 379)
[Tue Jul 24 04:59:12 2012] XMMSAS bgd. selection expression = annulus(25638.258000, 24619.436000, 5555.760160, 11111.520320, X, Y) && !ellipse(26295.382400, 24158.065600, 2027.524858, 2027.524858, 0.000000, X, Y) && !ellipse(30753.422000, 20582.974000, 277.196808, 277.196808, 0.000000, X, Y) && !ellipse(19503.099899, 20125.567535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18924.545120, 18943.346710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24556.171600, 25410.806000, 1219.576035, 876.672025, 39.240000, X, Y) && !ellipse(25174.541168, 23577.158722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23960.717380, 23011.135400, 361.649610, 361.649610, 0.000000, X, Y) && !ellipse(27176.550079, 25267.323822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30680.970660, 24013.924800, 328.269609, 328.269609, 0.000000, X, Y) && !ellipse(31779.555786, 22247.360748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21544.777120, 34350.749800, 461.056013, 461.056013, 0.000000, X, Y) && !ellipse(25784.122620, 22706.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26176.342133, 25700.757355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.804000, 24433.582000, 1963.752057, 1963.752057, 0.000000, X, Y) && !ellipse(32154.212280, 17463.936508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25416.038000, 23219.938000, 360.772810, 360.772810, 0.000000, X, Y) && !ellipse(28608.534000, 24207.222000, 1207.496035, 1207.496035, 0.000000, X, Y) && !ellipse(23089.140442, 26385.186737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15723.201065, 31248.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20395.550752, 26232.033000, 371.052811, 371.052811, 0.000000, X, Y) && !ellipse(23870.732000, 25137.524000, 1209.240035, 1209.240035, 0.000000, X, Y) && !ellipse(26771.086494, 24220.742546, 1695.232049, 1119.132286, 90.000000, X, Y) && !ellipse(16614.349701, 22242.921539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28096.934570, 23348.754517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29499.807800, 23983.876200, 534.372815, 534.372815, 0.000000, X, Y) && !ellipse(30958.958000, 22650.556380, 559.876016, 559.876016, 0.000000, X, Y) && !ellipse(24631.970000, 33868.772600, 405.500812, 405.500812, 0.000000, X, Y) && !ellipse(15677.312866, 26993.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.622000, 22269.442000, 1251.752036, 1251.752036, 0.000000, X, Y) && !ellipse(26230.881744, 22026.289734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22110.101044, 29055.169159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.364000, 24129.752440, 1234.864036, 1234.864036, 0.000000, X, Y) && !ellipse(29314.204000, 19952.024000, 1438.752041, 1438.752041, 0.000000, X, Y) && !ellipse(21509.008000, 13664.464000, 1864.216054, 1864.216054, 0.000000, X, Y) && !ellipse(23285.458618, 25261.915527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33014.101929, 15617.651703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32289.066528, 35118.077240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30703.230000, 19184.176000, 1554.648045, 1554.648045, 0.000000, X, Y)
[Tue Jul 24 04:59:12 2012] Writing fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src6.gif
[Tue Jul 24 05:04:36 2012] Mean detx,y = (419.33, -122.91) 
[Tue Jul 24 05:04:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 05:08:26 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 05:08:26 2012] Setting source spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 24 05:08:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jul 24 06:53:02 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:02 2012] Error reading totcts from fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 24 06:53:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:03 2012] Using photon index=1.80, rate=0.122, arf fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src6.arf
[Tue Jul 24 06:53:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:03 2012] Updating source flux to 1.1e-12
[Tue Jul 24 06:55:47 2012] Flag b found in src. 6 procflags, skipping spectral fitting
[Tue Jul 24 06:55:47 2012] Flag c found in src. 6 procflags, skipping spectral fitting