[Sun Jul 22 10:27:01 2012] Detection parameters:
  Position = (288.9, 261.2) = 13 25 33.32 -43 2 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.6 +/- 18.7
  Background counts = 38.4
  Rate = 0.005 +/- 0.0009

[Sun Jul 22 10:27:02 2012] Off-axis axis estimate = 2.79'
[Sun Jul 22 21:48:41 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 21:48:41 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Sun Jul 22 21:48:41 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.757
[Sun Jul 22 21:48:41 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 7.82"
[Mon Jul 23 00:53:10 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src42.ximg exists
[Mon Jul 23 00:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src42.csv
[Mon Jul 23 00:53:10 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src42_1.ximg exists
[Mon Jul 23 00:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src42.csv
[Mon Jul 23 00:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Mon Jul 23 00:53:12 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Mon Jul 23 00:54:02 2012] Spatial fit model total counts = 4775.150000, observed total counts = 4308.000000
[Mon Jul 23 00:54:02 2012] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 00:54:02 2012] Warning, spatial fit 42 centroid is now closest to src. 26
[Mon Jul 23 00:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:54:02 2012] Assessing source extent using major
[Mon Jul 23 00:54:02 2012] Source does appear to be extended
[Mon Jul 23 00:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:54:02 2012] Source is confused with source 26
[Mon Jul 23 08:56:29 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:56:29 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Mon Jul 23 08:56:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.757
[Mon Jul 23 08:56:29 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 7.82"
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src36.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src36.csv
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src36_1.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src36.csv
[Mon Jul 23 13:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Mon Jul 23 13:51:08 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Jul 23 13:51:45 2012] Spatial fit model total counts = 1532.110000, observed total counts = 1482.000000
[Mon Jul 23 13:51:45 2012] Offset between fit and detection position for source 57 = 8.487415 pixels
[Mon Jul 23 13:51:45 2012] 1646.550000 total counts/ 1489.030000 bgd. counts: snr = 4.082103
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 8.487415 pixels
  Position = (281.8, 256.5) = 13 25 36.15 -43 2 44.7
  Extent = 15.6 (15.6-31.3)", rotation angle = 0
  Source counts = 157.5 +/- 40.6
  Background counts = 1489.0
  Rate = 0.007 +/- 0.002
[Mon Jul 23 13:51:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:45 2012] Source does appear to be extended
[Mon Jul 23 13:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 04:59:13 2012] XMMSAS src. selection expression = ellipse(24468.622000, 22269.442000, 938.814027, 938.814027, 0.000000, X, Y)
[Tue Jul 24 04:59:13 2012] Writing source region out to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src57_src.reg
[Tue Jul 24 04:59:13 2012] Extracting stamp from image fullrun_mos2_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (228, 203) - (336, 310)
[Tue Jul 24 04:59:13 2012] XMMSAS bgd. selection expression = annulus(24468.622000, 22269.442000, 1564.690045, 3129.380090, X, Y) && !ellipse(26295.382400, 24158.065600, 2027.524858, 2027.524858, 0.000000, X, Y) && !ellipse(25638.258000, 24619.436000, 1111.152032, 1111.152032, 0.000000, X, Y) && !ellipse(24556.171600, 25410.806000, 1219.576035, 876.672025, 39.240000, X, Y) && !ellipse(25174.541168, 23577.158722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23960.717380, 23011.135400, 361.649610, 361.649610, 0.000000, X, Y) && !ellipse(27176.550079, 25267.323822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25784.122620, 22706.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26176.342133, 25700.757355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.804000, 24433.582000, 1963.752057, 1963.752057, 0.000000, X, Y) && !ellipse(25416.038000, 23219.938000, 360.772810, 360.772810, 0.000000, X, Y) && !ellipse(28608.534000, 24207.222000, 1207.496035, 1207.496035, 0.000000, X, Y) && !ellipse(23870.732000, 25137.524000, 1209.240035, 1209.240035, 0.000000, X, Y) && !ellipse(26771.086494, 24220.742546, 1695.232049, 1119.132286, 90.000000, X, Y) && !ellipse(28096.934570, 23348.754517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26230.881744, 22026.289734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.364000, 24129.752440, 1234.864036, 1234.864036, 0.000000, X, Y) && !ellipse(23285.458618, 25261.915527, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 04:59:13 2012] Writing fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src57.gif
[Tue Jul 24 05:15:57 2012] Mean detx,y = (-1961.93, 288.08) 
[Tue Jul 24 05:15:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 05:16:08 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 05:16:08 2012] Setting source spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jul 24 05:16:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Jul 24 06:53:03 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:03 2012] Error reading totcts from fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jul 24 06:53:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:04 2012] Using photon index=1.80, rate=0.00684, arf fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src57.arf
[Tue Jul 24 06:53:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:04 2012] Updating source flux to 6.5e-14
[Tue Jul 24 06:55:47 2012] Flag p found in src. 57 procflags, skipping spectral fitting
[Tue Jul 24 06:55:47 2012] Flag c found in src. 57 procflags, skipping spectral fitting