[Sun Jul 22 10:27:00 2012] Detection parameters:
  Position = (394.0, 126.0) = 13 24 51.55 -43 12 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.0 +/- 10.0
  Background counts = 7.8
  Rate = 0.003 +/- 0.0004

[Sun Jul 22 10:27:02 2012] Off-axis axis estimate = 14.29'
[Sun Jul 22 21:48:41 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 21:48:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 21:48:41 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Sun Jul 22 21:48:41 2012] source mask rpix=3.1, npix_max = 52, mask sum = 60, frac = 1.144
[Sun Jul 22 21:48:41 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 13.57"
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src67.ximg exists
[Mon Jul 23 00:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src67.csv
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src67_1.ximg exists
[Mon Jul 23 00:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src67.csv
[Mon Jul 23 00:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Mon Jul 23 00:53:12 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Mon Jul 23 00:53:12 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Mon Jul 23 00:54:02 2012] Warning, spatial fit 67 centroid is now closest to src. 79
[Mon Jul 23 00:54:02 2012] Source 33 is offset by 0.421639 and 3.207099 pixels which is larger than
2 X fitted extent = 2.204460 x 2.204460, not incorporating fit results
[Mon Jul 23 00:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:54:02 2012] Assessing source extent using major
[Mon Jul 23 00:54:02 2012] Source does appear to be extended
[Mon Jul 23 00:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 08:56:29 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:56:29 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Mon Jul 23 08:56:29 2012] source mask rpix=3.1, npix_max = 52, mask sum = 60, frac = 1.144
[Mon Jul 23 08:56:29 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 13.57"
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src55.ximg exists
[Mon Jul 23 13:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src55.csv
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src55_1.ximg exists
[Mon Jul 23 13:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src55.csv
[Mon Jul 23 13:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:09 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Mon Jul 23 13:51:09 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Mon Jul 23 13:51:09 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Mon Jul 23 13:51:45 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 18.315092 pixels away
[Mon Jul 23 13:51:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:45 2012] Assessing source extent using major
[Mon Jul 23 13:51:45 2012] Source does appear to be extended
[Mon Jul 23 13:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 04:59:13 2012] XMMSAS src. selection expression = ellipse(34225.889160, 10915.263603, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 04:59:13 2012] Writing source region out to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src33_src.reg
[Tue Jul 24 04:59:13 2012] Extracting stamp from image fullrun_mos2_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (356, 89) - (431, 164)
[Tue Jul 24 04:59:13 2012] XMMSAS bgd. selection expression = annulus(34225.889160, 10915.263603, 1087.500000, 2175.000000, X, Y)
[Tue Jul 24 04:59:13 2012] Writing fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src33.gif
[Tue Jul 24 05:21:00 2012] Mean detx,y = (-890.05, 15310.25) 
[Tue Jul 24 05:21:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 05:21:22 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 05:21:23 2012] Setting source spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jul 24 05:21:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Jul 24 06:52:18 2012] Not generating rmf since there are only 58 counts
[Tue Jul 24 06:52:18 2012] rmf not generated due to insufficient counts
[Tue Jul 24 06:53:03 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:03 2012] Error reading totcts from fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jul 24 06:53:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:04 2012] Using photon index=1.80, rate=0.00256, arf fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src33.arf
[Tue Jul 24 06:53:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:04 2012] Updating source flux to 8.3e-14
[Tue Jul 24 06:55:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting