[Sun Jul 22 10:26:59 2012] Detection parameters:
  Position = (283.9, 292.9) = 13 25 35.31 -43 0 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 525.3 +/- 32.5
  Background counts = 43.2
  Rate = 0.02 +/- 0.001

[Sun Jul 22 10:27:02 2012] Off-axis axis estimate = 1.13'
[Sun Jul 22 21:48:41 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 21:48:41 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Sun Jul 22 21:48:41 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Sun Jul 22 21:48:41 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 6.99"
[Mon Jul 23 00:53:10 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jul 23 00:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src6.csv
[Mon Jul 23 00:53:10 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jul 23 00:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src6.csv
[Mon Jul 23 00:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jul 23 00:53:11 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Jul 23 00:54:02 2012] Source 12 is offset by -6.530295 and 5.344595 pixels which is larger than
2 X fitted extent = 4.288929 x 4.288929, not incorporating fit results
[Mon Jul 23 00:54:02 2012] Source 12 is offset by -0.831200 and 3.978756 pixels which is larger than
2 X fitted extent = 1.242018 x 1.242018, not incorporating fit results
[Mon Jul 23 00:54:02 2012] Spatial fit model total counts = 1748.670000, observed total counts = 1553.000000
[Mon Jul 23 00:54:02 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 00:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:54:02 2012] Assessing source extent using major
[Mon Jul 23 00:54:02 2012] Source does appear to be extended
[Mon Jul 23 00:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:54:02 2012] Source is confused with source 18
[Mon Jul 23 00:54:02 2012] Source is confused with source 22
[Mon Jul 23 08:56:29 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:56:29 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Mon Jul 23 08:56:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Mon Jul 23 08:56:29 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.99"
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src5.csv
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src5.csv
[Mon Jul 23 13:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jul 23 13:51:08 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jul 23 13:51:45 2012] Warning, spatial fit 5 centroid is now closest to src. 6
[Mon Jul 23 13:51:45 2012] Spatial fit model total counts = 2052.700000, observed total counts = 1936.000000
[Mon Jul 23 13:51:45 2012] Offset between fit and detection position for source 12 = 1.122352 pixels
[Mon Jul 23 13:51:45 2012] Warning, changing simple spatial fit ID from 5 to 22
[Mon Jul 23 13:51:45 2012] 2009.244000 total counts/ 1575.990000 bgd. counts: snr = 10.913545
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.122352 pixels
  Position = (282.8, 292.6) = 13 25 35.75 -43 0 7.6
  Extent = 15.2" x 11.0", rotation angle = 39
  Source counts = 433.3 +/- 44.8
  Background counts = 1576.0
  Rate = 0.02 +/- 0.002
[Mon Jul 23 13:51:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:45 2012] Assessing source extent using major
[Mon Jul 23 13:51:45 2012] Source does appear to be extended
[Mon Jul 23 13:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.39
[Tue Jul 24 04:59:12 2012] XMMSAS src. selection expression = ellipse(24556.171600, 25410.806000, 914.682026, 657.504019, 39.240000, X, Y)
[Tue Jul 24 04:59:12 2012] Writing source region out to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src12_src.reg
[Tue Jul 24 04:59:12 2012] Extracting stamp from image fullrun_mos2_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (230, 240) - (335, 345)
[Tue Jul 24 04:59:12 2012] XMMSAS bgd. selection expression = annulus(24556.171600, 25410.806000, 1524.470044, 3048.940088, X, Y) && !ellipse(26295.382400, 24158.065600, 2027.524858, 2027.524858, 0.000000, X, Y) && !ellipse(25638.258000, 24619.436000, 1111.152032, 1111.152032, 0.000000, X, Y) && !ellipse(25174.541168, 23577.158722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23960.717380, 23011.135400, 361.649610, 361.649610, 0.000000, X, Y) && !ellipse(27176.550079, 25267.323822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25784.122620, 22706.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26176.342133, 25700.757355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.804000, 24433.582000, 1963.752057, 1963.752057, 0.000000, X, Y) && !ellipse(25416.038000, 23219.938000, 360.772810, 360.772810, 0.000000, X, Y) && !ellipse(28608.534000, 24207.222000, 1207.496035, 1207.496035, 0.000000, X, Y) && !ellipse(23089.140442, 26385.186737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23870.732000, 25137.524000, 1209.240035, 1209.240035, 0.000000, X, Y) && !ellipse(26771.086494, 24220.742546, 1695.232049, 1119.132286, 90.000000, X, Y) && !ellipse(28096.934570, 23348.754517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.622000, 22269.442000, 1251.752036, 1251.752036, 0.000000, X, Y) && !ellipse(26230.881744, 22026.289734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22110.101044, 29055.169159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.364000, 24129.752440, 1234.864036, 1234.864036, 0.000000, X, Y) && !ellipse(23285.458618, 25261.915527, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 04:59:12 2012] Writing fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src12.gif
[Tue Jul 24 05:09:24 2012] Mean detx,y = (-161.94, -1952.44) 
[Tue Jul 24 05:09:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 05:09:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 05:09:33 2012] Setting source spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jul 24 05:09:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jul 24 06:53:02 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:02 2012] Error reading totcts from fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jul 24 06:53:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:03 2012] Using photon index=1.80, rate=0.0188, arf fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src12.arf
[Tue Jul 24 06:53:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:03 2012] Updating source flux to 2e-13
[Tue Jul 24 06:55:47 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Tue Jul 24 06:55:47 2012] Flag p found in src. 12 procflags, skipping spectral fitting
[Tue Jul 24 06:55:47 2012] Flag c found in src. 12 procflags, skipping spectral fitting