[Sun Jul 22 10:26:58 2012] Detection parameters:
  Position = (302.9, 278.1) = 13 25 27.79 -43 1 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60040.1 +/- 290.6
  Background counts = 43.6
  Rate = 3 +/- 0.01

[Sun Jul 22 10:27:02 2012] Off-axis axis estimate = 1.51'
[Sun Jul 22 21:48:41 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 21:48:41 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Jul 22 21:48:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Sun Jul 22 21:48:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Mon Jul 23 00:53:10 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 00:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 00:53:10 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 00:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 00:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 00:53:11 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 00:53:11 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 23 00:54:02 2012] Spatial fit model total counts = 66186.800000, observed total counts = 66177.000000
[Mon Jul 23 00:54:02 2012] Offset between fit and detection position for source 1 = 0.146559 pixels
[Mon Jul 23 00:54:02 2012] 66195.400000 total counts/ 15729.300000 bgd. counts: snr = 402.388023
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.146559 pixels
  Position = (302.8, 278.2) = 13 25 27.81 -43 1 10.3
  Extent = 8.5 (8.5-8.6)", rotation angle = 0
  Source counts = 50466.1 +/- 257.3
  Background counts = 15729.3
  Rate = 2 +/- 0.01
[Mon Jul 23 00:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:54:02 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:54:02 2012] Source does appear to be extended
[Mon Jul 23 00:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:54:02 2012] Source is confused with source 6
[Mon Jul 23 08:56:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:56:29 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Mon Jul 23 08:56:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033
[Mon Jul 23 08:56:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.53"
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 13:51:07 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 13:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 13:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 13:51:08 2012] fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 13:51:08 2012] Fit fullrun_mos2_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 13:51:45 2012] Spatial fit model total counts = 66336.000000, observed total counts = 66129.000000
[Mon Jul 23 13:51:45 2012] Offset between fit and detection position for source 1 = 0.024602 pixels
[Mon Jul 23 13:51:45 2012] 66488.400000 total counts/ 16473.300000 bgd. counts: snr = 389.682442
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024602 pixels
  Position = (302.8, 278.2) = 13 25 27.82 -43 1 10.3
  Extent = 8.4 (8.4-8.5)", rotation angle = 0
  Source counts = 50015.1 +/- 257.9
  Background counts = 16473.3
  Rate = 2 +/- 0.01
[Mon Jul 23 13:51:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:45 2012] Source does appear to be extended
[Mon Jul 23 13:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 04:59:12 2012] Counts = 50015.100000, rescaling region sizes by 3.000000
[Tue Jul 24 04:59:12 2012] XMMSAS src. selection expression = ellipse(26295.382400, 24158.065600, 1520.643644, 1520.643644, 0.000000, X, Y)
[Tue Jul 24 04:59:12 2012] Writing source region out to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 24 04:59:12 2012] Extracting stamp from image fullrun_mos2_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (215, 191) - (390, 366)
[Tue Jul 24 04:59:12 2012] XMMSAS bgd. selection expression = annulus(26295.382400, 24158.065600, 7603.218219, 15206.436438, X, Y) && !ellipse(25638.258000, 24619.436000, 1111.152032, 1111.152032, 0.000000, X, Y) && !ellipse(30753.422000, 20582.974000, 277.196808, 277.196808, 0.000000, X, Y) && !ellipse(19503.099899, 20125.567535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18924.545120, 18943.346710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24556.171600, 25410.806000, 1219.576035, 876.672025, 39.240000, X, Y) && !ellipse(25174.541168, 23577.158722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23960.717380, 23011.135400, 361.649610, 361.649610, 0.000000, X, Y) && !ellipse(27176.550079, 25267.323822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13586.923340, 22032.233017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30680.970660, 24013.924800, 328.269609, 328.269609, 0.000000, X, Y) && !ellipse(31779.555786, 22247.360748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21544.777120, 34350.749800, 461.056013, 461.056013, 0.000000, X, Y) && !ellipse(25784.122620, 22706.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26176.342133, 25700.757355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.804000, 24433.582000, 1963.752057, 1963.752057, 0.000000, X, Y) && !ellipse(32154.212280, 17463.936508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25416.038000, 23219.938000, 360.772810, 360.772810, 0.000000, X, Y) && !ellipse(28608.534000, 24207.222000, 1207.496035, 1207.496035, 0.000000, X, Y) && !ellipse(23089.140442, 26385.186737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22270.089800, 12263.031280, 416.387212, 416.387212, 0.000000, X, Y) && !ellipse(15723.201065, 31248.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20395.550752, 26232.033000, 371.052811, 371.052811, 0.000000, X, Y) && !ellipse(23870.732000, 25137.524000, 1209.240035, 1209.240035, 0.000000, X, Y) && !ellipse(26771.086494, 24220.742546, 1695.232049, 1119.132286, 90.000000, X, Y) && !ellipse(16614.349701, 22242.921539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28096.934570, 23348.754517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29499.807800, 23983.876200, 534.372815, 534.372815, 0.000000, X, Y) && !ellipse(16559.965000, 12533.200800, 386.895211, 386.895211, 0.000000, X, Y) && !ellipse(30958.958000, 22650.556380, 559.876016, 559.876016, 0.000000, X, Y) && !ellipse(24631.970000, 33868.772600, 405.500812, 405.500812, 0.000000, X, Y) && !ellipse(38346.721600, 29995.016000, 500.896814, 276.848008, 90.000000, X, Y) && !ellipse(15677.312866, 26993.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.622000, 22269.442000, 1251.752036, 1251.752036, 0.000000, X, Y) && !ellipse(31157.242000, 12188.804000, 394.518411, 394.518411, 0.000000, X, Y) && !ellipse(26230.881744, 22026.289734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22110.101044, 29055.169159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.364000, 24129.752440, 1234.864036, 1234.864036, 0.000000, X, Y) && !ellipse(20613.636800, 11175.781200, 645.340019, 645.340019, 0.000000, X, Y) && !ellipse(29314.204000, 19952.024000, 1438.752041, 1438.752041, 0.000000, X, Y) && !ellipse(21509.008000, 13664.464000, 1864.216054, 1864.216054, 0.000000, X, Y) && !ellipse(23285.458618, 25261.915527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33014.101929, 15617.651703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32289.066528, 35118.077240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30703.230000, 19184.176000, 1554.648045, 1554.648045, 0.000000, X, Y) && !ellipse(34225.889160, 10915.263603, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 04:59:12 2012] Writing fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1.gif
[Tue Jul 24 04:59:21 2012] Mean detx,y = (456.98, -9.43) 
[Tue Jul 24 04:59:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 05:04:28 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 05:04:28 2012] Setting source spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 05:04:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 24 06:53:02 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:02 2012] Error reading totcts from fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 06:53:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:03 2012] Using photon index=1.80, rate=2.17, arf fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 06:53:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:03 2012] Updating source flux to 2.1e-11
[Tue Jul 24 06:55:47 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jul 24 06:59:50 2012] Reading fit data from xmm0093650201/analysis//spectral/fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 24 06:59:50 2012] Spectral fit parameter nH value = 6.56049e+22
[Tue Jul 24 06:59:50 2012] Spectral fit parameter PhoIndex value = 1.25143
[Tue Jul 24 06:59:50 2012] Failed to get F(0.3-8.0) from xmm0093650201/analysis//spectral/fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 24 06:59:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:59:50 2012] Using Nh = 6.6e+22, photon index=1.25, rate=2.17, arf fullrun_mos2_xmm0093650201_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 06:59:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:59:50 2012] Updating source flux to 6.4e-11