[Sun Jul 22 10:25:59 2012] Detection parameters:
  Position = (391.8, 134.1) = 13 24 52.42 -43 11 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.3 +/- 11.0
  Background counts = 7.6
  Rate = 0.003 +/- 0.0005

[Sun Jul 22 10:26:00 2012] Off-axis axis estimate = 13.70'
[Sun Jul 22 18:53:24 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 18:53:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 18:53:24 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Sun Jul 22 18:53:24 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.971
[Sun Jul 22 18:53:24 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 13.28"
[Sun Jul 22 21:48:39 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src52.ximg exists
[Sun Jul 22 21:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src52.csv
[Sun Jul 22 21:48:39 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src52_1.ximg exists
[Sun Jul 22 21:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src52.csv
[Sun Jul 22 21:48:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sun Jul 22 21:48:40 2012] Fit fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Mon Jul 23 00:53:47 2012] Spatial fit model total counts = 202.415000, observed total counts = 201.000000
[Mon Jul 23 00:53:47 2012] Offset between fit and detection position for source 60 = 0.367958 pixels
[Mon Jul 23 00:53:47 2012] 201.199300 total counts/ 152.924000 bgd. counts: snr = 3.903796
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.367958 pixels
  Position = (391.7, 134.5) = 13 24 52.44 -43 11 35.2
  Extent = 7.4 (5.5-9.5)", rotation angle = 0
  Source counts = 48.3 +/- 14.2
  Background counts = 152.9
  Rate = 0.002 +/- 0.0006
[Mon Jul 23 00:53:48 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:48 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:53:48 2012] Source does appear to be extended
[Mon Jul 23 00:53:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:53:48 2012] Deleting source due to low Poisson probability 0.9