[Sun Jul 22 10:25:57 2012] Detection parameters:
  Position = (313.0, 291.0) = 13 25 23.79 -43 0 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 362.0 +/- 29.4
  Background counts = 38.4
  Rate = 0.02 +/- 0.001

[Sun Jul 22 10:26:00 2012] Off-axis axis estimate = 1.18'
[Sun Jul 22 18:53:24 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 18:53:24 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Sun Jul 22 18:53:24 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Sun Jul 22 18:53:24 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.02"
[Sun Jul 22 21:48:38 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jul 22 21:48:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src11.csv
[Sun Jul 22 21:48:38 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jul 22 21:48:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src11.csv
[Sun Jul 22 21:48:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jul 22 21:48:40 2012] Fit fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Jul 23 00:53:47 2012] Source 6 is offset by 6.409657 and 5.420369 pixels which is larger than
2 X fitted extent = 4.758621 x 4.758621, not incorporating fit results
[Mon Jul 23 00:53:48 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:48 2012] Assessing source extent using major
[Mon Jul 23 00:53:48 2012] Source does appear to be extended
[Mon Jul 23 00:53:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 05:45:32 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 05:45:32 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Mon Jul 23 05:45:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Mon Jul 23 05:45:32 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.02"
[Mon Jul 23 08:56:27 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jul 23 08:56:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src11.csv
[Mon Jul 23 08:56:27 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jul 23 08:56:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src11.csv
[Mon Jul 23 08:56:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 08:56:28 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jul 23 08:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jul 23 08:56:28 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jul 23 08:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jul 23 08:56:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:34 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.925999 pixels away
[Mon Jul 23 13:51:34 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:34 2012] Assessing source extent using major
[Mon Jul 23 13:51:34 2012] Source does appear to be extended
[Mon Jul 23 13:51:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 02:59:42 2012] XMMSAS src. selection expression = ellipse(27178.504181, 25265.436096, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 02:59:42 2012] Writing source region out to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src6_src.reg
[Tue Jul 24 02:59:42 2012] Extracting stamp from image fullrun_mos1_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (275, 253) - (350, 328)
[Tue Jul 24 02:59:42 2012] XMMSAS bgd. selection expression = annulus(27178.504181, 25265.436096, 1087.500000, 2175.000000, X, Y) && !ellipse(26296.451400, 24154.692800, 2036.208059, 2036.208059, 0.000000, X, Y) && !ellipse(24881.434000, 25267.748000, 1110.416032, 1110.416032, 0.000000, X, Y) && !ellipse(24024.258000, 25880.910000, 1132.520033, 1132.520033, 0.000000, X, Y) && !ellipse(26138.428314, 25696.875702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27067.218628, 22376.326141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29502.355400, 24027.043000, 564.776816, 564.776816, 0.000000, X, Y) && !ellipse(27636.525940, 22823.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24498.047668, 23264.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.612000, 21848.240000, 1276.696037, 1276.696037, -0.000000, X, Y)
[Tue Jul 24 02:59:42 2012] Writing fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src6.gif
[Tue Jul 24 03:08:51 2012] Mean detx,y = (-103.51, -1828.40) 
[Tue Jul 24 03:08:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 03:09:00 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 03:09:01 2012] Setting source spectrum file to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 24 03:09:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jul 24 04:17:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 04:17:41 2012] rmf not generated due to insufficient counts
[Tue Jul 24 06:53:01 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:01 2012] Error reading totcts from fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 24 06:53:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:02 2012] Using photon index=1.80, rate=0.0169, arf fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src6.arf
[Tue Jul 24 06:53:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:02 2012] Updating source flux to 1.8e-13
[Tue Jul 24 06:53:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting