[Sun Jul 22 10:25:59 2012] Detection parameters:
  Position = (321.8, 250.9) = 13 25 20.29 -43 3 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.9 +/- 13.8
  Background counts = 34.4
  Rate = 0.003 +/- 0.0007

[Sun Jul 22 10:26:00 2012] Off-axis axis estimate = 3.84'
[Sun Jul 22 18:53:24 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 18:53:24 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Jul 22 18:53:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Sun Jul 22 18:53:24 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 8.35"
[Sun Jul 22 21:48:39 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src48.ximg exists
[Sun Jul 22 21:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src48.csv
[Sun Jul 22 21:48:39 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun Jul 22 21:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src48.csv
[Sun Jul 22 21:48:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun Jul 22 21:48:40 2012] Fit fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Mon Jul 23 00:53:47 2012] Source 56 is offset by -6.310108 and 6.547405 pixels which is larger than
2 X fitted extent = 2.890446 x 2.890446, not incorporating fit results
[Mon Jul 23 00:53:48 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:48 2012] Assessing source extent using major
[Mon Jul 23 00:53:48 2012] Source does appear to be extended
[Mon Jul 23 00:53:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 05:45:32 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 05:45:32 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Mon Jul 23 05:45:32 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Mon Jul 23 05:45:32 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.35"
[Mon Jul 23 08:56:28 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src43.ximg exists
[Mon Jul 23 08:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src43.csv
[Mon Jul 23 08:56:28 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon Jul 23 08:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src43.csv
[Mon Jul 23 08:56:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 08:56:29 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon Jul 23 08:56:29 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon Jul 23 08:56:29 2012] Fit fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Mon Jul 23 13:51:34 2012] Warning, spatial fit 43 centroid is now closest to src. 48
[Mon Jul 23 13:51:34 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 10.891816 pixels away
[Mon Jul 23 13:51:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:35 2012] Assessing source extent using major
[Mon Jul 23 13:51:35 2012] Source does appear to be extended
[Mon Jul 23 13:51:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:51:35 2012] Source is confused with source 61
[Tue Jul 24 02:59:43 2012] XMMSAS src. selection expression = ellipse(27945.438599, 21777.192230, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 02:59:43 2012] Writing source region out to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src56_src.reg
[Tue Jul 24 02:59:43 2012] Extracting stamp from image fullrun_mos1_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (284, 213) - (359, 288)
[Tue Jul 24 02:59:43 2012] XMMSAS bgd. selection expression = annulus(27945.438599, 21777.192230, 1087.500000, 2175.000000, X, Y) && !ellipse(26296.451400, 24154.692800, 2036.208059, 2036.208059, 0.000000, X, Y) && !ellipse(30686.567841, 24023.155853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30234.421661, 18854.496155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25388.860443, 21729.221161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27067.218628, 22376.326141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29502.355400, 24027.043000, 564.776816, 564.776816, 0.000000, X, Y) && !ellipse(30752.085999, 19232.941376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.525940, 22823.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28769.383400, 21983.390400, 478.422414, 478.422414, 0.000000, X, Y) && !ellipse(26136.219330, 21613.414093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.612000, 21848.240000, 1276.696037, 1276.696037, -0.000000, X, Y) && !ellipse(26394.067810, 22007.611603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.928000, 20718.052000, 1196.432034, 1196.432034, 0.000000, X, Y)
[Tue Jul 24 02:59:43 2012] Writing fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src56.gif
[Tue Jul 24 03:15:27 2012] Mean detx,y = (3087.81, -530.17) 
[Tue Jul 24 03:15:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 03:15:36 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 03:15:37 2012] Setting source spectrum file to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Jul 24 03:15:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Tue Jul 24 04:46:03 2012] Not generating rmf since there are only 70 counts
[Tue Jul 24 04:46:03 2012] rmf not generated due to insufficient counts
[Tue Jul 24 06:53:01 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:01 2012] Error reading totcts from fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Jul 24 06:53:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:02 2012] Using photon index=1.80, rate=0.00337, arf fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src56.arf
[Tue Jul 24 06:53:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:02 2012] Updating source flux to 3.6e-14
[Tue Jul 24 06:53:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting