[Sun Jul 22 10:25:57 2012] Detection parameters:
  Position = (353.3, 276.7) = 13 25 7.80 -43 1 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.3 +/- 21.7
  Background counts = 20.6
  Rate = 0.02 +/- 0.001

[Sun Jul 22 10:26:00 2012] Off-axis axis estimate = 4.28'
[Sun Jul 22 18:53:24 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 18:53:24 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Sun Jul 22 18:53:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Sun Jul 22 18:53:24 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.57"
[Sun Jul 22 21:48:38 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jul 22 21:48:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src12.csv
[Sun Jul 22 21:48:38 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jul 22 21:48:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src12.csv
[Sun Jul 22 21:48:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jul 22 21:48:40 2012] Fit fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Jul 23 00:53:47 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.175423 pixels away
[Mon Jul 23 00:53:48 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:48 2012] Assessing source extent using major
[Mon Jul 23 00:53:48 2012] Source does appear to be extended
[Mon Jul 23 00:53:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 05:45:32 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 05:45:32 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Mon Jul 23 05:45:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Mon Jul 23 05:45:32 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.57"
[Mon Jul 23 08:56:27 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jul 23 08:56:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src12.csv
[Mon Jul 23 08:56:27 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jul 23 08:56:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src12.csv
[Mon Jul 23 08:56:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 08:56:28 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jul 23 08:56:28 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jul 23 08:56:28 2012] Fit fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Jul 23 13:51:34 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.175423 pixels away
[Mon Jul 23 13:51:34 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.827536 pixels away
[Mon Jul 23 13:51:34 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:34 2012] Assessing source extent using major
[Mon Jul 23 13:51:34 2012] Source does appear to be extended
[Mon Jul 23 13:51:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 02:59:42 2012] XMMSAS src. selection expression = ellipse(30686.567841, 24023.155853, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 02:59:42 2012] Writing source region out to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src17_src.reg
[Tue Jul 24 02:59:42 2012] Extracting stamp from image fullrun_mos1_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (316, 239) - (391, 314)
[Tue Jul 24 02:59:42 2012] XMMSAS bgd. selection expression = annulus(30686.567841, 24023.155853, 1087.500000, 2175.000000, X, Y) && !ellipse(31757.543600, 22260.324200, 403.133612, 403.133612, 0.000000, X, Y) && !ellipse(30963.676000, 22703.351800, 298.485609, 298.485609, 0.000000, X, Y) && !ellipse(29502.355400, 24027.043000, 564.776816, 564.776816, 0.000000, X, Y) && !ellipse(28769.383400, 21983.390400, 478.422414, 478.422414, 0.000000, X, Y) && !ellipse(27945.438599, 21777.192230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.612000, 21848.240000, 1276.696037, 1276.696037, -0.000000, X, Y) && !ellipse(28958.928000, 20718.052000, 1196.432034, 1196.432034, 0.000000, X, Y)
[Tue Jul 24 02:59:42 2012] Writing fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src17.gif
[Tue Jul 24 03:09:04 2012] Mean detx,y = (2978.64, -4065.82) 
[Tue Jul 24 03:09:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 03:09:14 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 03:09:14 2012] Setting source spectrum file to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jul 24 03:09:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Jul 24 04:17:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 04:17:46 2012] rmf not generated due to insufficient counts
[Tue Jul 24 06:53:01 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:01 2012] Error reading totcts from fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jul 24 06:53:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:02 2012] Using photon index=1.80, rate=0.0156, arf fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src17.arf
[Tue Jul 24 06:53:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:02 2012] Updating source flux to 2e-13
[Tue Jul 24 06:53:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting