[Sun Jul 22 10:25:56 2012] Detection parameters:
  Position = (303.0, 278.1) = 13 25 27.75 -43 1 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61706.8 +/- 299.4
  Background counts = 45.3
  Rate = 3 +/- 0.01

[Sun Jul 22 10:26:00 2012] Off-axis axis estimate = 1.51'
[Sun Jul 22 18:53:24 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 18:53:24 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Jul 22 18:53:24 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Sun Jul 22 18:53:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Sun Jul 22 21:48:38 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 22 21:48:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 21:48:38 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 22 21:48:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 21:48:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 21:48:39 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 22 21:48:40 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 22 21:48:40 2012] Fit fullrun_mos1_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 23 00:53:47 2012] Spatial fit model total counts = 66405.100000, observed total counts = 66428.000000
[Mon Jul 23 00:53:47 2012] Offset between fit and detection position for source 1 = 0.191045 pixels
[Mon Jul 23 00:53:47 2012] 66354.800000 total counts/ 16053.800000 bgd. counts: snr = 396.997430
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.191045 pixels
  Position = (302.8, 278.2) = 13 25 27.81 -43 1 10.4
  Extent = 8.5 (8.4-8.5)", rotation angle = 0
  Source counts = 50301.0 +/- 257.6
  Background counts = 16053.8
  Rate = 2 +/- 0.01
[Mon Jul 23 00:53:48 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:48 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:53:48 2012] Source does appear to be extended
[Mon Jul 23 00:53:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 05:45:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 05:45:32 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Mon Jul 23 05:45:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.041
[Mon Jul 23 05:45:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.48"
[Mon Jul 23 08:56:27 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 08:56:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 08:56:27 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 08:56:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 08:56:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 08:56:28 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 08:56:28 2012] fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 08:56:28 2012] Fit fullrun_mos1_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 13:51:34 2012] Spatial fit model total counts = 66405.100000, observed total counts = 66428.000000
[Mon Jul 23 13:51:34 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Mon Jul 23 13:51:34 2012] 66354.800000 total counts/ 16053.800000 bgd. counts: snr = 396.997430
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (302.8, 278.2) = 13 25 27.81 -43 1 10.4
  Extent = 8.5 (8.4-8.5)", rotation angle = 0
  Source counts = 50301.0 +/- 257.6
  Background counts = 16053.8
  Rate = 2 +/- 0.01
[Mon Jul 23 13:51:34 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:34 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:34 2012] Source does appear to be extended
[Mon Jul 23 13:51:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 02:59:42 2012] Counts = 50301.000000, rescaling region sizes by 3.000000
[Tue Jul 24 02:59:42 2012] XMMSAS src. selection expression = ellipse(26296.451400, 24154.692800, 1527.156044, 1527.156044, 0.000000, X, Y)
[Tue Jul 24 02:59:42 2012] Writing source region out to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 24 02:59:42 2012] Extracting stamp from image fullrun_mos1_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (215, 190) - (391, 366)
[Tue Jul 24 02:59:42 2012] XMMSAS bgd. selection expression = annulus(26296.451400, 24154.692800, 7635.780220, 15271.560439, X, Y) && !ellipse(24881.434000, 25267.748000, 1110.416032, 1110.416032, 0.000000, X, Y) && !ellipse(30712.432400, 20550.891200, 398.600011, 398.600011, 0.000000, X, Y) && !ellipse(19487.351593, 20072.331543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18933.528412, 19039.785339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24024.258000, 25880.910000, 1132.520033, 1132.520033, 0.000000, X, Y) && !ellipse(13564.980850, 22038.416580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23158.287200, 12673.151400, 389.889611, 389.889611, 0.000000, X, Y) && !ellipse(22281.013600, 12248.149400, 445.077613, 445.077613, 0.000000, X, Y) && !ellipse(23953.896000, 23016.898000, 342.492010, 342.492010, 0.000000, X, Y) && !ellipse(27178.504181, 25265.436096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30686.567841, 24023.155853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26138.428314, 25696.875702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31757.543600, 22260.324200, 403.133612, 403.133612, 0.000000, X, Y) && !ellipse(32096.828800, 17464.743600, 559.397616, 559.397616, 0.000000, X, Y) && !ellipse(23093.769412, 26463.211400, 641.227218, 641.227218, 0.000000, X, Y) && !ellipse(30234.421661, 18854.496155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20382.172120, 26212.757400, 388.745611, 388.745611, 0.000000, X, Y) && !ellipse(16620.684600, 22269.939400, 394.559211, 394.559211, 0.000000, X, Y) && !ellipse(16545.084000, 12523.335000, 494.468814, 494.468814, 0.000000, X, Y) && !ellipse(21522.751360, 34328.027800, 369.308811, 369.308811, 0.000000, X, Y) && !ellipse(25388.860443, 21729.221161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25559.775299, 12159.663223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30963.676000, 22703.351800, 298.485609, 298.485609, 0.000000, X, Y) && !ellipse(27067.218628, 22376.326141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29502.355400, 24027.043000, 564.776816, 564.776816, 0.000000, X, Y) && !ellipse(15729.404541, 27029.939362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33078.507629, 15677.835907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38327.771800, 29969.662600, 652.427219, 278.053608, 68.987390, X, Y) && !ellipse(31346.539093, 20348.652390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24681.352200, 33901.746000, 617.561428, 617.561428, 0.000000, X, Y) && !ellipse(30752.085999, 19232.941376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22669.730774, 15850.553528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31151.407715, 12207.132492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.525940, 22823.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28769.383400, 21983.390400, 478.422414, 478.422414, 0.000000, X, Y) && !ellipse(15728.873800, 31208.226000, 358.857610, 358.857610, 0.000000, X, Y) && !ellipse(40852.587402, 22412.700043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26136.219330, 21613.414093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27945.438599, 21777.192230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24498.047668, 23264.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.612000, 21848.240000, 1276.696037, 1276.696037, -0.000000, X, Y) && !ellipse(26394.067810, 22007.611603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.928000, 20718.052000, 1196.432034, 1196.432034, 0.000000, X, Y)
[Tue Jul 24 02:59:42 2012] Writing fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1.gif
[Tue Jul 24 02:59:51 2012] Mean detx,y = (225.58, -609.52) 
[Tue Jul 24 02:59:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 03:03:14 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 03:03:14 2012] Setting source spectrum file to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 03:03:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 24 06:53:01 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:53:01 2012] Error reading totcts from fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 06:53:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:02 2012] Using photon index=1.80, rate=2.18, arf fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 06:53:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:02 2012] Updating source flux to 2e-11
[Tue Jul 24 06:55:47 2012] Reading fit data from xmm0093650201/analysis//spectral/fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 24 06:55:47 2012] Spectral fit parameter nH value = 6.74003e+22
[Tue Jul 24 06:55:47 2012] Spectral fit parameter PhoIndex value = 1.22108
[Tue Jul 24 06:55:47 2012] Failed to get F(0.3-8.0) from xmm0093650201/analysis//spectral/fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 24 06:55:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:55:47 2012] Using Nh = 6.7e+22, photon index=1.22, rate=2.18, arf fullrun_mos1_xmm0093650201_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 06:55:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:55:47 2012] Updating source flux to 6.2e-11