[Tue Apr 10 23:53:37 2012] Detection parameters:
  Position = (307.5, 340.1) = 11 20 13.83 13 0 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.9 +/- 8.2
  Background counts = 7.8
  Rate = 0.008 +/- 0.002

[Tue Apr 10 23:53:37 2012] Off-axis axis estimate = 3.09'
[Tue Apr 10 23:53:53 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 23:53:53 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Tue Apr 10 23:53:53 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.735
[Tue Apr 10 23:53:53 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.98"
[Tue Apr 10 23:53:53 2012] fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_src19.ximg exists
[Tue Apr 10 23:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_src19.csv
[Tue Apr 10 23:53:53 2012] fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Apr 10 23:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_src19.csv
[Tue Apr 10 23:53:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 23:53:54 2012] fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Apr 10 23:53:54 2012] fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Apr 10 23:53:54 2012] Fit fullrun_pn_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Apr 10 23:54:00 2012] Source 19 is offset by -1.230011 and 6.467451 pixels which is larger than
2 X fitted extent = 2.304501 x 2.304501, not incorporating fit results
[Tue Apr 10 23:54:00 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 23:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 23:54:00 2012] Assessing source extent using major
[Tue Apr 10 23:54:00 2012] Source does appear to be extended
[Tue Apr 10 23:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 23:54:13 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 23:54:13 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Tue Apr 10 23:54:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.735
[Tue Apr 10 23:54:13 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.98"
[Tue Apr 10 23:54:13 2012] fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_src18.ximg exists
[Tue Apr 10 23:54:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_src18.csv
[Tue Apr 10 23:54:13 2012] fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Apr 10 23:54:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_src18.csv
[Tue Apr 10 23:54:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 23:54:13 2012] fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Apr 10 23:54:13 2012] fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Apr 10 23:54:13 2012] Fit fullrun_pn_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Apr 10 23:54:19 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 109.331264 pixels away
[Tue Apr 10 23:54:19 2012] Source 19 is offset by -1.237660 and 6.467451 pixels which is larger than
2 X fitted extent = 2.366878 x 2.366878, not incorporating fit results
[Tue Apr 10 23:54:19 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 23:54:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 23:54:19 2012] Assessing source extent using major
[Tue Apr 10 23:54:19 2012] Source does appear to be extended
[Tue Apr 10 23:54:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 23:54:30 2012] XMMSAS src. selection expression = ellipse(26702.128204, 29543.150269, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 23:54:30 2012] Not overwriting source region fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_src.reg
[Tue Apr 10 23:54:30 2012] Extracting stamp from image fullrun_pn_xmm0093641101_pi300-10000_cl_sm2.00.img.gz, (270, 303) - (345, 378)
[Tue Apr 10 23:54:30 2012] XMMSAS bgd. selection expression = annulus(26702.128204, 29543.150269, 1087.500000, 2175.000000, X, Y) && !ellipse(24604.430000, 27003.324600, 438.828013, 438.828013, 0.000000, X, Y) && !ellipse(25361.865880, 27272.785800, 449.895213, 320.267209, 350.425040, X, Y) && !ellipse(26406.603180, 27923.422000, 766.277622, 766.277622, 0.000000, X, Y) && !ellipse(26759.576300, 28828.123580, 466.383213, 466.383213, 0.000000, X, Y) && !ellipse(25184.210140, 30361.655600, 476.171214, 476.171214, 0.000000, X, Y) && !ellipse(25524.258972, 28249.349182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25360.992000, 27626.368000, 2192.736063, 2192.736063, 0.000000, X, Y) && !ellipse(27155.514282, 27092.797180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26347.816000, 26460.316000, 1096.368032, 1096.368032, 0.000000, X, Y) && !ellipse(24952.469208, 26515.933655, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 23:54:30 2012] Writing fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19.gif
[Tue Apr 10 23:54:31 2012] ../../xmm0093641101/products/events/fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0093641101/products/events/fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Tue Apr 10 23:54:31 2012] Mean detx,y = (1206.09, -1214.99) 
[Tue Apr 10 23:54:31 2012] ../../xmm0093641101/products/images/fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_src.img and ../../xmm0093641101/products/images/fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Tue Apr 10 23:54:31 2012] ../../xmm0093641101/products/spectra/fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0093641101/products/spectra/fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Tue Apr 10 23:54:31 2012] Setting source spectrum file to fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Apr 10 23:54:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Apr 10 23:54:31 2012] ../../xmm0093641101/products/lightcurves/fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0093641101/products/lightcurves/fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Tue Apr 10 23:54:32 2012] Not generating rmf since there are only 32 counts
[Tue Apr 10 23:54:32 2012] rmf not generated due to insufficient counts
[Tue Apr 10 23:54:32 2012] fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Tue Apr 10 23:54:42 2012] Updating aperture counts using extracted products
[Tue Apr 10 23:54:42 2012] Error reading totcts from fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Apr 10 23:54:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 23:54:42 2012] Using photon index=1.80, rate=0.00753, arf fullrun_pn_xmm0093641101_pi300-10000_pass1_cl_src19.arf
[Tue Apr 10 23:54:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 23:54:42 2012] Updating source flux to 2.1e-14
[Tue Apr 10 23:54:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting