[Tue Apr 10 23:53:39 2012] Detection parameters:
  Position = (299.8, 299.3) = 11 20 16.11 12 57 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 7.8
  Background counts = 4.5
  Rate = 0.003 +/- 0.0008

[Tue Apr 10 23:53:39 2012] Off-axis axis estimate = 0.12'
[Tue Apr 10 23:53:55 2012] Using EEF radius (= 6.49 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 23:53:55 2012] Initial guess for spatial extent in simple fitting = 6.49"
[Tue Apr 10 23:53:55 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009
[Tue Apr 10 23:53:55 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 6.49"
[Tue Apr 10 23:53:55 2012] fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_src20.ximg exists
[Tue Apr 10 23:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_src20.csv
[Tue Apr 10 23:53:55 2012] fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Apr 10 23:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_src20.csv
[Tue Apr 10 23:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 23:53:56 2012] fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Apr 10 23:53:56 2012] fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Apr 10 23:53:56 2012] Fit fullrun_mos2_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Apr 10 23:54:06 2012] Warning, spatial fit 20 centroid is now closest to src. 16
[Tue Apr 10 23:54:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 23:54:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 23:54:06 2012] Assessing source extent using major
[Tue Apr 10 23:54:06 2012] Source does appear to be extended
[Tue Apr 10 23:54:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 23:54:14 2012] Using EEF radius (= 6.49 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 23:54:14 2012] Initial guess for spatial extent in simple fitting = 6.49"
[Tue Apr 10 23:54:14 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009
[Tue Apr 10 23:54:14 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 6.49"
[Tue Apr 10 23:54:15 2012] fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_src17.ximg exists
[Tue Apr 10 23:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_src17.csv
[Tue Apr 10 23:54:15 2012] fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Apr 10 23:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_src17.csv
[Tue Apr 10 23:54:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 23:54:15 2012] fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Apr 10 23:54:15 2012] fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Apr 10 23:54:15 2012] Fit fullrun_mos2_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Apr 10 23:54:23 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 140.543446 pixels away
[Tue Apr 10 23:54:23 2012] Source 22 is offset by 3.606423 and -6.635753 pixels which is larger than
2 X fitted extent = 3.788474 x 3.788474, not incorporating fit results
[Tue Apr 10 23:54:23 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 23:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 23:54:23 2012] Assessing source extent using major
[Tue Apr 10 23:54:23 2012] Source does appear to be extended
[Tue Apr 10 23:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 23:54:33 2012] XMMSAS src. selection expression = ellipse(26034.138763, 25993.203522, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 23:54:33 2012] Not overwriting source region fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_src.reg
[Tue Apr 10 23:54:33 2012] Extracting stamp from image fullrun_mos2_xmm0093641101_pi300-10000_cl_sm2.00.img.gz, (262, 262) - (337, 337)
[Tue Apr 10 23:54:33 2012] XMMSAS bgd. selection expression = annulus(26034.138763, 25993.203522, 1087.500000, 2175.000000, X, Y) && !ellipse(24588.181360, 27004.227600, 356.783210, 356.783210, 0.000000, X, Y) && !ellipse(26404.050000, 27916.706000, 747.568822, 648.796019, 89.598411, X, Y) && !ellipse(25370.148000, 27275.942000, 354.383210, 354.383210, 0.000000, X, Y) && !ellipse(25363.954620, 28453.136800, 407.315212, 407.315212, 0.000000, X, Y) && !ellipse(25548.948000, 26880.732000, 1119.288032, 1119.288032, 0.000000, X, Y) && !ellipse(26090.871429, 28733.244202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24792.514000, 27049.516000, 1123.176032, 1123.176032, 0.000000, X, Y) && !ellipse(26094.994690, 27264.320038, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 23:54:33 2012] Writing fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22.gif
[Tue Apr 10 23:54:34 2012] ../../xmm0093641101/products/events/fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0093641101/products/events/fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Tue Apr 10 23:54:34 2012] Mean detx,y = (974.79, -1547.02) 
[Tue Apr 10 23:54:34 2012] ../../xmm0093641101/products/images/fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_src.img and ../../xmm0093641101/products/images/fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Tue Apr 10 23:54:34 2012] ../../xmm0093641101/products/spectra/fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0093641101/products/spectra/fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Tue Apr 10 23:54:34 2012] Setting source spectrum file to fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Apr 10 23:54:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Apr 10 23:54:34 2012] ../../xmm0093641101/products/lightcurves/fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0093641101/products/lightcurves/fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Tue Apr 10 23:54:35 2012] Not generating rmf since there are only 27 counts
[Tue Apr 10 23:54:35 2012] rmf not generated due to insufficient counts
[Tue Apr 10 23:54:35 2012] fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Tue Apr 10 23:54:42 2012] Updating aperture counts using extracted products
[Tue Apr 10 23:54:42 2012] Error reading totcts from fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Apr 10 23:54:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 23:54:43 2012] Using photon index=1.80, rate=0.00261, arf fullrun_mos2_xmm0093641101_pi300-10000_pass1_cl_src22.arf
[Tue Apr 10 23:54:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 23:54:43 2012] Updating source flux to 2.9e-14
[Tue Apr 10 23:54:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting