[Tue Apr 10 23:53:38 2012] Detection parameters: Position = (341.9, 335.1) = 11 20 3.59 13 0 30.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 21.4 +/- 6.3 Background counts = 3.9 Rate = 0.002 +/- 0.0006 [Tue Apr 10 23:53:38 2012] Off-axis axis estimate = 4.12' [Tue Apr 10 23:53:54 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting [Tue Apr 10 23:53:54 2012] Initial guess for spatial extent in simple fitting = 8.49" [Tue Apr 10 23:53:54 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040 [Tue Apr 10 23:53:54 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.49" [Tue Apr 10 23:53:55 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src24.ximg exists [Tue Apr 10 23:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src24.csv [Tue Apr 10 23:53:55 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src24_1.ximg exists [Tue Apr 10 23:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src24.csv [Tue Apr 10 23:53:55 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Apr 10 23:53:55 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Tue Apr 10 23:53:55 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Tue Apr 10 23:53:55 2012] Fit fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Tue Apr 10 23:54:03 2012] Spatial fit model total counts = 60.996600, observed total counts = 61.000000 [Tue Apr 10 23:54:03 2012] Offset between fit and detection position for source 15 = 0.155524 pixels [Tue Apr 10 23:54:03 2012] 58.809900 total counts/ 46.683600 bgd. counts: snr = 1.774787 Spatial fit parameters: Offset between fit and detection position for source 15 = 0.155524 pixels Position = (341.7, 335.2) = 11 20 3.64 13 0 30.9 Extent = 3.6 (2.1-6.3)", rotation angle = 0 Source counts = 12.1 +/- 7.7 Background counts = 46.7 Rate = 0.001 +/- 0.0007 Deleting source due to low Poisson probability