[Tue Apr 10 23:53:38 2012] Detection parameters:
  Position = (460.2, 367.1) = 11 19 28.36 13 2 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.2 +/- 14.8
  Background counts = 2.5
  Rate = 0.01 +/- 0.001

[Tue Apr 10 23:53:38 2012] Off-axis axis estimate = 12.74'
[Tue Apr 10 23:53:54 2012] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 23:53:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 23:53:54 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Tue Apr 10 23:53:54 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.034
[Tue Apr 10 23:53:54 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.80"
[Tue Apr 10 23:53:54 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Apr 10 23:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src7.csv
[Tue Apr 10 23:53:54 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Apr 10 23:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src7.csv
[Tue Apr 10 23:53:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 23:53:55 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Apr 10 23:53:55 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Apr 10 23:53:55 2012] Fit fullrun_mos1_xmm0093641101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Apr 10 23:54:03 2012] Spatial fit model total counts = 162.999000, observed total counts = 163.000000
[Tue Apr 10 23:54:03 2012] Offset between fit and detection position for source 10 = 0.334887 pixels
[Tue Apr 10 23:54:03 2012] 162.727100 total counts/ 60.891100 bgd. counts: snr = 13.050418
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.334887 pixels
  Position = (460.0, 367.4) = 11 19 28.43 13 2 50.6
  Extent = 6.2 (5.2-7.3)", rotation angle = 0
  Source counts = 101.8 +/- 12.8
  Background counts = 60.9
  Rate = 0.01 +/- 0.001
[Tue Apr 10 23:54:03 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 23:54:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 23:54:03 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 23:54:03 2012] Source does appear to be extended
[Tue Apr 10 23:54:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 23:54:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 23:54:13 2012] Initial guess for spatial extent in simple fitting = 6.17"
[Tue Apr 10 23:54:13 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.087
[Tue Apr 10 23:54:13 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.17"
[Tue Apr 10 23:54:14 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Apr 10 23:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_src7.csv
[Tue Apr 10 23:54:14 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Apr 10 23:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_src7.csv
[Tue Apr 10 23:54:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 23:54:14 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Apr 10 23:54:14 2012] fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Apr 10 23:54:14 2012] Fit fullrun_mos1_xmm0093641101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Apr 10 23:54:21 2012] Warning, spatial fit 7 centroid is now closest to src. 18
[Tue Apr 10 23:54:21 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 23:54:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 23:54:21 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 23:54:21 2012] Source does appear to be extended
[Tue Apr 10 23:54:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 23:54:32 2012] XMMSAS src. selection expression = ellipse(39970.461204, 31911.503600, 370.065611, 370.065611, 0.000000, X, Y)
[Tue Apr 10 23:54:32 2012] Not overwriting source region fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_src.reg
[Tue Apr 10 23:54:32 2012] Extracting stamp from image fullrun_mos1_xmm0093641101_pi300-10000_cl_sm2.00.img.gz, (439, 346) - (481, 389)
[Tue Apr 10 23:54:32 2012] XMMSAS bgd. selection expression = annulus(39970.461204, 31911.503600, 616.776018, 1233.552035, X, Y)
[Tue Apr 10 23:54:32 2012] Writing fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10.gif
[Tue Apr 10 23:54:32 2012] ../../xmm0093641101/products/events/fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0093641101/products/events/fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Apr 10 23:54:32 2012] Mean detx,y = (-2209.06, 13898.95) 
[Tue Apr 10 23:54:32 2012] ../../xmm0093641101/products/images/fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_src.img and ../../xmm0093641101/products/images/fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Apr 10 23:54:32 2012] ../../xmm0093641101/products/spectra/fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0093641101/products/spectra/fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Apr 10 23:54:32 2012] Setting source spectrum file to fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Apr 10 23:54:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Apr 10 23:54:32 2012] ../../xmm0093641101/products/lightcurves/fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0093641101/products/lightcurves/fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Apr 10 23:54:33 2012] fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10.rmf exists, delete to re-create
[Tue Apr 10 23:54:33 2012] fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Tue Apr 10 23:54:42 2012] Updating aperture counts using extracted products
[Tue Apr 10 23:54:42 2012] Error reading totcts from fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Apr 10 23:54:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 23:54:42 2012] Using photon index=1.80, rate=0.0096, arf fullrun_mos1_xmm0093641101_pi300-10000_pass1_cl_src10.arf
[Tue Apr 10 23:54:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 23:54:42 2012] Updating source flux to 2.4e-13