[Tue Jul  9 15:45:45 2013] Detection parameters:
  Position = (270.3, 362.6) = 3 47 22.27 68 8 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 11.5
  Background counts = 3.8
  Rate = 0.01 +/- 0.002

[Tue Jul  9 15:45:45 2013] Off-axis axis estimate = 5.08'
[Tue Jul  9 16:13:00 2013] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Tue Jul  9 16:13:00 2013] Initial guess for spatial extent in simple fitting = 8.97"
[Tue Jul  9 16:13:00 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.762
[Tue Jul  9 16:13:00 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.97"
[Tue Jul  9 16:41:08 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jul  9 16:41:08 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jul  9 16:41:08 2013] Fit fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_src7 appears to have run properly
[Tue Jul  9 16:41:08 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jul  9 16:41:08 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jul  9 16:41:08 2013] Fit fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jul  9 17:07:17 2013] Spatial fit model total counts = 98.126900, observed total counts = 103.000000
[Tue Jul  9 17:07:17 2013] Offset between fit and detection position for source 4 = 0.976940 pixels
[Tue Jul  9 17:07:17 2013] 97.241800 total counts/ 45.370800 bgd. counts: snr = 7.700810
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.976940 pixels
  Position = (270.2, 361.6) = 3 47 22.33 68 8 59.4
  Extent = 3.8 (2.9-4.8)", rotation angle = 0
  Source counts = 51.9 +/- 9.9
  Background counts = 45.4
  Rate = 0.005 +/- 0.001
[Tue Jul  9 17:07:17 2013] Vigneting correction estimate = 1.000000
[Tue Jul  9 17:07:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  9 17:07:17 2013] Assessing source extent using major axis lower bound
[Tue Jul  9 17:07:17 2013] Source does appear to be extended
[Tue Jul  9 17:07:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  9 17:34:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  9 17:34:04 2013] Initial guess for spatial extent in simple fitting = 3.78"
[Tue Jul  9 17:34:04 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.799
[Tue Jul  9 17:34:04 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 3.78"
[Tue Jul  9 18:02:42 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jul  9 18:02:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src7.csv
[Tue Jul  9 18:02:42 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jul  9 18:02:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src7.csv
[Tue Jul  9 18:02:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  9 18:02:42 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jul  9 18:02:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jul  9 18:02:42 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jul  9 18:02:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jul  9 18:02:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  9 18:24:58 2013] Source 4 is offset by -0.265393 and 2.101798 pixels which is larger than
2 X fitted extent = 0.625476 x 0.625476, not incorporating fit results
[Tue Jul  9 18:24:58 2013] Vigneting correction estimate = 1.000000
[Tue Jul  9 18:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  9 18:24:58 2013] Assessing source extent using major axis lower bound
[Tue Jul  9 18:24:58 2013] Source does appear to be extended
[Tue Jul  9 18:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  9 18:45:03 2013] XMMSAS src. selection expression = ellipse(23457.581840, 31412.724400, 227.005807, 227.005807, 0.000000, X, Y)
[Tue Jul  9 18:45:03 2013] Writing source region out to fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src4_src.reg
[Tue Jul  9 18:45:03 2013] Extracting stamp from image fullrun_mos1_xmm0093640901_pi300-10000_cl_sm2.00.img.gz, (257, 349) - (283, 375)
[Tue Jul  9 18:45:03 2013] XMMSAS bgd. selection expression = annulus(23457.581840, 31412.724400, 378.343011, 756.686022, X, Y)
[Tue Jul  9 18:45:03 2013] Writing fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src4.gif
[Tue Jul  9 18:46:04 2013] Mean detx,y = (4080.60, -3824.91) 
[Tue Jul  9 18:46:04 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  9 18:46:09 2013] Binned source spectrum to 10 counts/bin
[Tue Jul  9 18:46:09 2013] Setting source spectrum file to fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jul  9 18:46:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jul  9 18:57:29 2013] Not generating rmf since there are only 51 counts
[Tue Jul  9 18:57:29 2013] rmf not generated due to insufficient counts
[Tue Jul  9 19:06:00 2013] Updating aperture counts using extracted products
[Tue Jul  9 19:06:00 2013] Total counts from fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 58.00
[Tue Jul  9 19:06:00 2013] Total counts from fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src4_bgd.pi.gz = 31.00
[Tue Jul  9 19:06:00 2013] Got source and background scale factors 151100.000000, 1256516.000000
[Tue Jul  9 19:06:00 2013] User source parameters:
  Position = (270.2, 361.6) = 3 47 22.33 68 8 59.4
  Extent = 3.8 (2.9-4.8)", rotation angle = 0
  Source aperture counts = 54.3 +/- 8.7
  Background aperture counts = 3.7
  Rate = 0.006 +/- 0.0009

[Tue Jul  9 19:06:02 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul  9 19:06:02 2013] Using photon index=1.80, rate=0.00541, arf fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src4.arf
[Tue Jul  9 19:06:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  9 19:06:02 2013] Updating source flux to 1.4e-13
[Tue Jul  9 19:06:05 2013] Flag b found in src. 4 procflags, skipping spectral fitting
[Tue Jul  9 19:06:05 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jul  9 19:06:07 2013] xmm0093640901/analysis//spectral/fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete