[Tue Jul  9 15:45:45 2013] Detection parameters:
  Position = (382.2, 305.2) = 3 45 55.24 68 4 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1428.3 +/- 45.0
  Background counts = 4.8
  Rate = 0.2 +/- 0.006

[Tue Jul  9 15:45:45 2013] Off-axis axis estimate = 6.09'
[Tue Jul  9 16:13:00 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Tue Jul  9 16:13:00 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Tue Jul  9 16:13:00 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.046
[Tue Jul  9 16:13:00 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.48"
[Tue Jul  9 16:41:08 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  9 16:41:08 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  9 16:41:08 2013] Fit fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jul  9 16:41:08 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  9 16:41:08 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  9 16:41:08 2013] Fit fullrun_mos1_xmm0093640901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul  9 17:07:17 2013] Spatial fit model total counts = 1384.100000, observed total counts = 1265.000000
[Tue Jul  9 17:07:17 2013] Offset between fit and detection position for source 1 = 0.143958 pixels
[Tue Jul  9 17:07:17 2013] 1408.680000 total counts/ 438.157000 bgd. counts: snr = 46.365074
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.143958 pixels
  Position = (382.1, 305.3) = 3 45 55.32 68 4 53.5
  Extent = 4.9 (4.7-5.3)", rotation angle = 0
  Source counts = 970.5 +/- 37.5
  Background counts = 438.2
  Rate = 0.1 +/- 0.004
[Tue Jul  9 17:07:17 2013] Vigneting correction estimate = 1.000000
[Tue Jul  9 17:07:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  9 17:07:17 2013] Assessing source extent using major axis lower bound
[Tue Jul  9 17:07:17 2013] Source does appear to be extended
[Tue Jul  9 17:07:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  9 17:34:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  9 17:34:04 2013] Initial guess for spatial extent in simple fitting = 4.93"
[Tue Jul  9 17:34:04 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.125
[Tue Jul  9 17:34:04 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 4.93"
[Tue Jul  9 18:02:42 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul  9 18:02:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src1.csv
[Tue Jul  9 18:02:42 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul  9 18:02:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src1.csv
[Tue Jul  9 18:02:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  9 18:02:42 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul  9 18:02:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul  9 18:02:42 2013] fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul  9 18:02:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul  9 18:02:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  9 18:24:58 2013] Warning, spatial fit 1 centroid is now closest to src. 8
[Tue Jul  9 18:24:58 2013] Vigneting correction estimate = 1.000000
[Tue Jul  9 18:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  9 18:24:58 2013] Assessing source extent using major axis lower bound
[Tue Jul  9 18:24:58 2013] Source does appear to be extended
[Tue Jul  9 18:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  9 18:45:03 2013] XMMSAS src. selection expression = ellipse(33195.101600, 26510.223540, 295.774209, 295.774209, 0.000000, X, Y)
[Tue Jul  9 18:45:03 2013] Writing source region out to fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul  9 18:45:03 2013] Extracting stamp from image fullrun_mos1_xmm0093640901_pi300-10000_cl_sm2.00.img.gz, (365, 288) - (399, 322)
[Tue Jul  9 18:45:03 2013] XMMSAS bgd. selection expression = annulus(33195.101600, 26510.223540, 492.957014, 985.914028, X, Y) && !ellipse(32769.032104, 27375.249817, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  9 18:45:03 2013] Writing fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src1.gif
[Tue Jul  9 18:45:05 2013] Mean detx,y = (-816.20, 5914.36) 
[Tue Jul  9 18:45:05 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  9 18:45:13 2013] Binned source spectrum to 10 counts/bin
[Tue Jul  9 18:45:13 2013] Setting source spectrum file to fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  9 18:45:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul  9 19:06:00 2013] Updating aperture counts using extracted products
[Tue Jul  9 19:06:00 2013] Total counts from fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1013.00
[Tue Jul  9 19:06:00 2013] Total counts from fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src1_bgd.pi.gz = 60.00
[Tue Jul  9 19:06:00 2013] Got source and background scale factors 275200.000000, 1028948.000000
[Tue Jul  9 19:06:00 2013] User source parameters:
  Position = (382.1, 305.3) = 3 45 55.32 68 4 53.5
  Extent = 4.9 (4.7-5.3)", rotation angle = 0
  Source aperture counts = 997.0 +/- 32.8
  Background aperture counts = 16.0
  Rate = 0.1 +/- 0.003

[Tue Jul  9 19:06:02 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul  9 19:06:02 2013] Using photon index=1.80, rate=0.101, arf fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src1.arf
[Tue Jul  9 19:06:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  9 19:06:02 2013] Updating source flux to 1.9e-12
[Tue Jul  9 19:06:07 2013] xmm0093640901/analysis//spectral/fullrun_mos1_xmm0093640901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete