[Tue Apr 10 14:42:55 2012] Detection parameters:
  Position = (278.9, 286.2) = 23 16 10.73 -42 35 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1961.5 +/- 54.1
  Background counts = 35.8
  Rate = 0.1 +/- 0.003

[Tue Apr 10 14:42:56 2012] Off-axis axis estimate = 1.67'
[Tue Apr 10 14:43:07 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 14:43:07 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Apr 10 14:43:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Tue Apr 10 14:43:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Tue Apr 10 14:43:07 2012] fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 14:43:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 14:43:07 2012] fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 14:43:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 14:43:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 14:43:07 2012] fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 14:43:07 2012] fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 14:43:07 2012] Fit fullrun_mos1_xmm0093640701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 14:43:12 2012] Spatial fit model total counts = 1933.000000, observed total counts = 1933.000000
[Tue Apr 10 14:43:12 2012] Offset between fit and detection position for source 9 = 0.204144 pixels
[Tue Apr 10 14:43:12 2012] 1933.551000 total counts/ 738.391000 bgd. counts: snr = 43.982798
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.204144 pixels
  Position = (279.0, 286.4) = 23 16 10.71 -42 35 4.3
  Extent = 6.6 (6.2-7.0)", rotation angle = 0
  Source counts = 1195.2 +/- 44.0
  Background counts = 738.4
  Rate = 0.07 +/- 0.003
[Tue Apr 10 14:43:12 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 14:43:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 14:43:12 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 14:43:12 2012] Source does appear to be extended
[Tue Apr 10 14:43:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 14:43:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 14:43:19 2012] Initial guess for spatial extent in simple fitting = 6.63"
[Tue Apr 10 14:43:19 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.976
[Tue Apr 10 14:43:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.63"
[Tue Apr 10 14:43:19 2012] fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 14:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 14:43:19 2012] fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 14:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 14:43:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 14:43:20 2012] fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 14:43:20 2012] fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 14:43:20 2012] Fit fullrun_mos1_xmm0093640701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 14:43:24 2012] Spatial fit model total counts = 1933.000000, observed total counts = 1933.000000
[Tue Apr 10 14:43:24 2012] Offset between fit and detection position for source 9 = 0.001115 pixels
[Tue Apr 10 14:43:24 2012] 1933.492000 total counts/ 736.342000 bgd. counts: snr = 44.117286
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.001115 pixels
  Position = (279.0, 286.4) = 23 16 10.71 -42 35 4.3
  Extent = 6.7 (6.2-7.0)", rotation angle = 0
  Source counts = 1197.2 +/- 44.0
  Background counts = 736.3
  Rate = 0.07 +/- 0.003
[Tue Apr 10 14:43:24 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 14:43:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 14:43:24 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 14:43:24 2012] Source does appear to be extended
[Tue Apr 10 14:43:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 14:43:32 2012] Counts = 1197.150000, rescaling region sizes by 2.000000
[Tue Apr 10 14:43:32 2012] XMMSAS src. selection expression = ellipse(24223.109544, 24871.757000, 798.385223, 798.385223, 0.000000, X, Y)
[Tue Apr 10 14:43:32 2012] Not overwriting source region fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_src.reg
[Tue Apr 10 14:43:32 2012] Extracting stamp from image fullrun_mos1_xmm0093640701_pi300-10000_cl_sm2.00.img.gz, (233, 241) - (325, 332)
[Tue Apr 10 14:43:32 2012] XMMSAS bgd. selection expression = annulus(24223.109544, 24871.757000, 2661.284077, 5322.568153, X, Y) && !ellipse(28129.773140, 21340.751200, 314.275209, 314.275209, 0.000000, X, Y) && !ellipse(22995.016740, 24606.788000, 369.095211, 369.095211, 0.000000, X, Y)
[Tue Apr 10 14:43:32 2012] Writing fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9.gif
[Tue Apr 10 14:43:32 2012] ../../xmm0093640701/products/events/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0093640701/products/events/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue Apr 10 14:43:32 2012] Mean detx,y = (194.76, -175.64) 
[Tue Apr 10 14:43:32 2012] ../../xmm0093640701/products/images/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_src.img and ../../xmm0093640701/products/images/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue Apr 10 14:43:32 2012] ../../xmm0093640701/products/spectra/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0093640701/products/spectra/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue Apr 10 14:43:32 2012] Setting source spectrum file to fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Apr 10 14:43:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Apr 10 14:43:32 2012] ../../xmm0093640701/products/lightcurves/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0093640701/products/lightcurves/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue Apr 10 14:43:33 2012] fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9.rmf exists, delete to re-create
[Tue Apr 10 14:43:33 2012] fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Tue Apr 10 14:43:50 2012] Updating aperture counts using extracted products
[Tue Apr 10 14:43:50 2012] Error reading totcts from fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Apr 10 14:43:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 14:43:50 2012] Using photon index=1.80, rate=0.0725, arf fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9.arf
[Tue Apr 10 14:43:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 14:43:50 2012] Updating source flux to 6.9e-13
[Tue Apr 10 14:43:53 2012] Reading fit data from xmm0093640701/analysis//spectral/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_pl.csv
[Tue Apr 10 14:43:53 2012] Spectral fit parameter nH value = 5.2902e+21
[Tue Apr 10 14:43:53 2012] Spectral fit parameter PhoIndex value = 5.34571
[Tue Apr 10 14:43:53 2012] Failed to get F(0.3-8.0) from xmm0093640701/analysis//spectral/fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 14:43:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 14:43:53 2012] Using Nh = 5.3e+21, photon index=5.35, rate=0.0725, arf fullrun_mos1_xmm0093640701_pi300-10000_pass1_cl_src9.arf
[Tue Apr 10 14:43:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 14:43:53 2012] Updating source flux to 4.2e-13