[Fri Oct  7 00:41:14 2011] Detection parameters:
  Position = (385.7, 152.7) = 13 20 2.16 33 59 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.0 +/- 13.2
  Background counts = 10.0
  Rate = 0.006 +/- 0.0008

[Fri Oct  7 00:41:16 2011] Off-axis axis estimate = 12.31'
[Fri Oct  7 00:42:15 2011] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 00:42:15 2011] Initial guess for spatial extent in simple fitting = 12.58"
[Fri Oct  7 00:42:15 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.064
[Fri Oct  7 00:42:15 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 12.58"
[Fri Oct  7 01:47:02 2011] fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Oct  7 01:47:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_src13.csv
[Fri Oct  7 01:47:02 2011] fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Oct  7 01:47:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_src13.csv
[Fri Oct  7 01:47:02 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 01:47:02 2011] fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct  7 01:47:02 2011] fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct  7 01:47:02 2011] Fit fullrun_pn_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Oct  7 03:31:09 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.938256 pixels away
[Fri Oct  7 03:31:09 2011] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.335093 pixels away
[Fri Oct  7 03:31:09 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:31:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:31:09 2011] Assessing source extent using major
[Fri Oct  7 03:31:09 2011] Source does appear to be extended
[Fri Oct  7 03:31:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:31:30 2011] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:31:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 03:31:30 2011] Initial guess for spatial extent in simple fitting = 12.58"
[Fri Oct  7 03:31:30 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.064
[Fri Oct  7 03:31:30 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 12.58"
[Fri Oct  7 04:45:26 2011] fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_src13.ximg exists
[Fri Oct  7 04:45:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_src13.csv
[Fri Oct  7 04:45:26 2011] fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Oct  7 04:45:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_src13.csv
[Fri Oct  7 04:45:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 04:45:26 2011] fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct  7 04:45:26 2011] fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct  7 04:45:26 2011] Fit fullrun_pn_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct  7 06:15:43 2011] Spatial fit model total counts = 224.335000, observed total counts = 224.000000
[Fri Oct  7 06:15:43 2011] Offset between fit and detection position for source 13 = 0.308162 pixels
[Fri Oct  7 06:15:43 2011] 221.795000 total counts/ 140.598000 bgd. counts: snr = 6.847790
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.308162 pixels
  Position = (385.8, 152.5) = 13 20 2.11 33 59 20.0
  Extent = 7.8 (6.0-10.2)", rotation angle = 0
  Source counts = 81.2 +/- 14.9
  Background counts = 140.6
  Rate = 0.005 +/- 0.0009
[Fri Oct  7 06:15:43 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 06:15:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 06:15:43 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 06:15:43 2011] Source does appear to be extended
[Fri Oct  7 06:15:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 06:16:04 2011] XMMSAS src. selection expression = ellipse(33516.056200, 13215.517200, 467.104813, 467.104813, 0.000000, X, Y)
[Fri Oct  7 06:16:04 2011] Writing source region out to fullrun_pn_xmm0093640401_pi300-10000_pass1_cl_src13_src.reg
[Fri Oct  7 06:16:04 2011] Extracting stamp from image fullrun_pn_xmm0093640401_pi300-10000_cl_sm2.00.img.gz, (359, 126) - (413, 179)
[Fri Oct  7 06:16:04 2011] XMMSAS bgd. selection expression = annulus(33516.056200, 13215.517200, 778.508022, 1557.016045, X, Y) && !ellipse(33564.464600, 12100.073800, 604.904817, 421.441612, 352.635793, X, Y)
[Fri Oct  7 06:16:04 2011] Writing fullrun_pn_xmm0093640401_pi300-10000_pass1_cl_src13.gif
[Fri Oct  7 06:22:05 2011] Mean detx,y = (-3896.82, -13062.62) 
[Fri Oct  7 06:22:06 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 06:22:24 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 06:22:25 2011] Setting source spectrum file to fullrun_pn_xmm0093640401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Oct  7 06:22:25 2011] Setting bgd. spectrum file to fullrun_pn_xmm0093640401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Oct  7 06:50:05 2011] Not generating rmf since there are only 81 counts
[Fri Oct  7 06:50:05 2011] rmf not generated due to insufficient counts
[Fri Oct  7 07:35:57 2011] Updating aperture counts using extracted products
[Fri Oct  7 07:35:57 2011] Error reading totcts from fullrun_pn_xmm0093640401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Oct  7 07:35:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:35:57 2011] Using photon index=1.80, rate=0.00512, arf fullrun_pn_xmm0093640401_pi300-10000_pass1_cl_src13.arf
[Fri Oct  7 07:35:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 07:35:57 2011] Updating source flux to 3.6e-14
[Fri Oct  7 07:36:32 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting