[Fri Oct  7 00:41:20 2011] Detection parameters:
  Position = (384.0, 211.7) = 13 20 2.70 34 3 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.2 +/- 6.8
  Background counts = 4.1
  Rate = 0.002 +/- 0.0007

[Fri Oct  7 00:41:21 2011] Off-axis axis estimate = 8.83'
[Fri Oct  7 02:33:34 2011] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 02:33:34 2011] Initial guess for spatial extent in simple fitting = 10.85"
[Fri Oct  7 02:33:34 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Fri Oct  7 02:33:34 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 10.85"
[Fri Oct  7 03:31:01 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src17.ximg exists
[Fri Oct  7 03:31:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src17.csv
[Fri Oct  7 03:31:01 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Oct  7 03:31:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src17.csv
[Fri Oct  7 03:31:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:31:01 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Oct  7 03:31:01 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Oct  7 03:31:01 2011] Fit fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Oct  7 03:31:20 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 14.991611 pixels away
[Fri Oct  7 03:31:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:31:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:31:20 2011] Assessing source extent using major
[Fri Oct  7 03:31:20 2011] Source does appear to be extended
[Fri Oct  7 03:31:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:28:14 2011] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:28:14 2011] Initial guess for spatial extent in simple fitting = 10.85"
[Fri Oct  7 05:28:14 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Fri Oct  7 05:28:14 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 10.85"
[Fri Oct  7 06:15:33 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src17.ximg exists
[Fri Oct  7 06:15:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src17.csv
[Fri Oct  7 06:15:33 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Oct  7 06:15:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src17.csv
[Fri Oct  7 06:15:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 06:15:33 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Oct  7 06:15:34 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Oct  7 06:15:34 2011] Fit fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Oct  7 06:15:52 2011] Spatial fit model total counts = 57.914600, observed total counts = 58.000000
[Fri Oct  7 06:15:52 2011] Offset between fit and detection position for source 32 = 0.364517 pixels
[Fri Oct  7 06:15:52 2011] 58.789200 total counts/ 42.041000 bgd. counts: snr = 2.583043
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.364517 pixels
  Position = (383.8, 212.0) = 13 20 2.80 34 3 38.9
  Extent = 5.2 (3.5-9.2)", rotation angle = 0
  Source counts = 16.7 +/- 7.7
  Background counts = 42.0
  Rate = 0.0008 +/- 0.0004
[Fri Oct  7 06:15:52 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 06:15:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 06:15:52 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 06:15:52 2011] Source does appear to be extended
[Fri Oct  7 06:15:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 07:16:19 2011] XMMSAS src. selection expression = ellipse(33339.626740, 18393.463600, 314.565809, 314.565809, 0.000000, X, Y)
[Fri Oct  7 07:16:19 2011] Writing source region out to fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src32_src.reg
[Fri Oct  7 07:16:19 2011] Extracting stamp from image fullrun_mos2_xmm0093640401_pi300-10000_cl_sm2.00.img.gz, (366, 194) - (402, 230)
[Fri Oct  7 07:16:19 2011] XMMSAS bgd. selection expression = annulus(33339.626740, 18393.463600, 524.276348, 1048.552696, X, Y) && !ellipse(34343.037600, 17640.409000, 313.408009, 313.408009, 0.000000, X, Y)
[Fri Oct  7 07:16:19 2011] Writing fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src32.gif
[Fri Oct  7 07:19:35 2011] Mean detx,y = (5693.70, 7925.70) 
[Fri Oct  7 07:19:36 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 07:19:44 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 07:19:44 2011] Setting source spectrum file to fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Oct  7 07:19:44 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Oct  7 07:35:01 2011] Not generating rmf since there are only 16 counts
[Fri Oct  7 07:35:01 2011] rmf not generated due to insufficient counts
[Fri Oct  7 07:35:59 2011] Updating aperture counts using extracted products
[Fri Oct  7 07:35:59 2011] Error reading totcts from fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Oct  7 07:35:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:35:59 2011] Using photon index=1.80, rate=0.000849, arf fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src32.arf
[Fri Oct  7 07:35:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 07:35:59 2011] Updating source flux to 2.2e-14
[Fri Oct  7 07:36:14 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting