[Fri Oct  7 00:41:19 2011] Detection parameters:
  Position = (132.4, 306.4) = 13 21 30.88 34 10 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.3 +/- 8.4
  Background counts = 3.8
  Rate = 0.002 +/- 0.0004

[Fri Oct  7 00:41:21 2011] Off-axis axis estimate = 12.05'
[Fri Oct  7 02:33:34 2011] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 02:33:34 2011] Initial guess for spatial extent in simple fitting = 12.46"
[Fri Oct  7 02:33:34 2011] source mask rpix=2.9, npix_max = 45, mask sum = 38, frac = 0.840
[Fri Oct  7 02:33:34 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 12.46"
[Fri Oct  7 03:31:01 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src21.ximg exists
[Fri Oct  7 03:31:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src21.csv
[Fri Oct  7 03:31:01 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Oct  7 03:31:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src21.csv
[Fri Oct  7 03:31:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:31:01 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Oct  7 03:31:01 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Oct  7 03:31:01 2011] Fit fullrun_mos2_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Oct  7 03:31:20 2011] Source 10 is offset by 1.993939 and 6.818133 pixels which is larger than
2 X fitted extent = 1.680487 x 1.680487, not incorporating fit results
[Fri Oct  7 03:31:20 2011] Spatial fit model total counts = 75.793900, observed total counts = 77.000000
[Fri Oct  7 03:31:20 2011] Offset between fit and detection position for source 10 = 0.354753 pixels
[Fri Oct  7 03:31:20 2011] 78.340600 total counts/ 49.293800 bgd. counts: snr = 4.137158
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.354753 pixels
  Position = (132.4, 306.1) = 13 21 30.87 34 10 27.6
  Extent = 5.1 (3.4-7.2)", rotation angle = 0
  Source counts = 29.0 +/- 8.9
  Background counts = 49.3
  Rate = 0.001 +/- 0.0004
[Fri Oct  7 03:31:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:31:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:31:20 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:31:20 2011] Source does appear to be extended
[Fri Oct  7 03:31:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:28:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:28:14 2011] Initial guess for spatial extent in simple fitting = 5.06"
[Fri Oct  7 05:28:14 2011] source mask rpix=1.2, npix_max = 11, mask sum = 10, frac = 0.904
[Fri Oct  7 05:28:14 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 5.06"
[Fri Oct  7 06:15:33 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src21.ximg exists
[Fri Oct  7 06:15:33 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Oct  7 06:15:33 2011] Fit fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_src21 appears to have run properly
[Fri Oct  7 06:15:34 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Oct  7 06:15:34 2011] fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Oct  7 06:15:34 2011] Fit fullrun_mos2_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Oct  7 06:15:52 2011] Spatial fit model total counts = 71.863900, observed total counts = 73.000000
[Fri Oct  7 06:15:52 2011] Offset between fit and detection position for source 10 = 0.171815 pixels
[Fri Oct  7 06:15:52 2011] 76.014900 total counts/ 49.292000 bgd. counts: snr = 3.806233
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.171815 pixels
  Position = (132.3, 305.9) = 13 21 30.89 34 10 26.9
  Extent = 4.5 (2.8-6.9)", rotation angle = 0
  Source counts = 26.7 +/- 8.7
  Background counts = 49.3
  Rate = 0.001 +/- 0.0004
[Fri Oct  7 06:15:52 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 06:15:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 06:15:53 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 06:15:53 2011] Source does appear to be extended
[Fri Oct  7 06:15:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 07:16:19 2011] XMMSAS src. selection expression = ellipse(11465.865800, 26566.946400, 269.959808, 269.959808, 0.000000, X, Y)
[Fri Oct  7 07:16:19 2011] Writing source region out to fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src10_src.reg
[Fri Oct  7 07:16:19 2011] Extracting stamp from image fullrun_mos2_xmm0093640401_pi300-10000_cl_sm2.00.img.gz, (117, 290) - (148, 321)
[Fri Oct  7 07:16:19 2011] XMMSAS bgd. selection expression = annulus(11465.865800, 26566.946400, 449.933013, 899.866026, X, Y) && !ellipse(12332.992828, 25007.534515, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Oct  7 07:16:19 2011] Writing fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src10.gif
[Fri Oct  7 07:20:29 2011] Mean detx,y = (-12212.53, -7038.47) 
[Fri Oct  7 07:20:30 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 07:20:43 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 07:20:43 2011] Setting source spectrum file to fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Oct  7 07:20:43 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Oct  7 07:35:09 2011] Not generating rmf since there are only 26 counts
[Fri Oct  7 07:35:09 2011] rmf not generated due to insufficient counts
[Fri Oct  7 07:35:59 2011] Updating aperture counts using extracted products
[Fri Oct  7 07:35:59 2011] Error reading totcts from fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Oct  7 07:35:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:35:59 2011] Using photon index=1.80, rate=0.00135, arf fullrun_mos2_xmm0093640401_pi300-10000_pass1_cl_src10.arf
[Fri Oct  7 07:35:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 07:35:59 2011] Updating source flux to 4.7e-14
[Fri Oct  7 07:36:14 2011] Flag b found in src. 10 procflags, skipping spectral fitting
[Fri Oct  7 07:36:14 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting