[Fri Oct  7 00:41:17 2011] Detection parameters:
  Position = (241.5, 406.2) = 13 20 52.65 34 17 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.6 +/- 16.2
  Background counts = 4.1
  Rate = 0.009 +/- 0.0008

[Fri Oct  7 00:41:18 2011] Off-axis axis estimate = 8.83'
[Fri Oct  7 01:47:02 2011] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 01:47:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 01:47:02 2011] Initial guess for spatial extent in simple fitting = 10.85"
[Fri Oct  7 01:47:02 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Fri Oct  7 01:47:02 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 10.85"
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src5.ximg exists
[Fri Oct  7 02:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src5.csv
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Oct  7 02:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src5.csv
[Fri Oct  7 02:33:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct  7 02:33:33 2011] Fit fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct  7 03:31:14 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.370995 pixels away
[Fri Oct  7 03:31:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:31:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:31:14 2011] Assessing source extent using major
[Fri Oct  7 03:31:14 2011] Source does appear to be extended
[Fri Oct  7 03:31:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 04:45:27 2011] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 04:45:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 04:45:27 2011] Initial guess for spatial extent in simple fitting = 10.85"
[Fri Oct  7 04:45:27 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Fri Oct  7 04:45:27 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 10.85"
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src5.ximg exists
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Oct  7 05:28:13 2011] Fit fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct  7 05:28:13 2011] Fit fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct  7 06:15:47 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.370995 pixels away
[Fri Oct  7 06:15:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 06:15:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 06:15:47 2011] Assessing source extent using major
[Fri Oct  7 06:15:47 2011] Source does appear to be extended
[Fri Oct  7 06:15:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 07:00:35 2011] XMMSAS src. selection expression = ellipse(20962.646500, 35287.335358, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct  7 07:00:35 2011] Writing source region out to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src9_src.reg
[Fri Oct  7 07:00:35 2011] Extracting stamp from image fullrun_mos1_xmm0093640401_pi300-10000_cl_sm2.00.img.gz, (204, 369) - (279, 444)
[Fri Oct  7 07:00:35 2011] XMMSAS bgd. selection expression = annulus(20962.646500, 35287.335358, 1087.500000, 2175.000000, X, Y) && !ellipse(19558.410000, 34075.342000, 503.712014, 503.712014, 0.000000, X, Y)
[Fri Oct  7 07:00:35 2011] Writing fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src9.gif
[Fri Oct  7 07:01:42 2011] Mean detx,y = (-11889.56, 175.41) 
[Fri Oct  7 07:01:43 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 07:01:52 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 07:01:53 2011] Setting source spectrum file to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Oct  7 07:01:53 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Oct  7 07:15:22 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Oct  7 07:15:22 2011] rmf not generated due to insufficient counts
[Fri Oct  7 07:35:58 2011] Updating aperture counts using extracted products
[Fri Oct  7 07:35:58 2011] Error reading totcts from fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Oct  7 07:35:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:35:58 2011] Using photon index=1.80, rate=0.0092, arf fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src9.arf
[Fri Oct  7 07:35:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 07:35:58 2011] Updating source flux to 1.8e-13
[Fri Oct  7 07:36:01 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting