[Fri Oct  7 00:41:18 2011] Detection parameters:
  Position = (220.4, 313.3) = 13 21 0.03 34 11 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.2 +/- 7.6
  Background counts = 5.0
  Rate = 0.002 +/- 0.0005

[Fri Oct  7 00:41:18 2011] Off-axis axis estimate = 5.76'
[Fri Oct  7 01:47:02 2011] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 01:47:02 2011] Initial guess for spatial extent in simple fitting = 9.31"
[Fri Oct  7 01:47:02 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.897
[Fri Oct  7 01:47:02 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 9.31"
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src16.ximg exists
[Fri Oct  7 02:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src16.csv
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Oct  7 02:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src16.csv
[Fri Oct  7 02:33:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 02:33:34 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Oct  7 02:33:34 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Oct  7 02:33:34 2011] Fit fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Oct  7 03:31:14 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.925657 pixels away
[Fri Oct  7 03:31:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:31:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:31:14 2011] Assessing source extent using major
[Fri Oct  7 03:31:14 2011] Source does appear to be extended
[Fri Oct  7 03:31:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 04:45:27 2011] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 04:45:27 2011] Initial guess for spatial extent in simple fitting = 9.31"
[Fri Oct  7 04:45:27 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.897
[Fri Oct  7 04:45:27 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 9.31"
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src16.ximg exists
[Fri Oct  7 05:28:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src16.csv
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Oct  7 05:28:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src16.csv
[Fri Oct  7 05:28:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Oct  7 05:28:13 2011] Fit fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Oct  7 06:15:47 2011] Spatial fit model total counts = 59.997900, observed total counts = 60.000000
[Fri Oct  7 06:15:47 2011] Offset between fit and detection position for source 19 = 0.259727 pixels
[Fri Oct  7 06:15:47 2011] 59.731100 total counts/ 35.640300 bgd. counts: snr = 4.035344
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.259727 pixels
  Position = (220.6, 313.5) = 13 20 59.96 34 11 0.5
  Extent = 5.1 (2.8-6.9)", rotation angle = 0
  Source counts = 24.1 +/- 7.7
  Background counts = 35.6
  Rate = 0.001 +/- 0.0004
[Fri Oct  7 06:15:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 06:15:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 06:15:47 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 06:15:47 2011] Source does appear to be extended
[Fri Oct  7 06:15:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 07:00:35 2011] XMMSAS src. selection expression = ellipse(19142.470800, 27225.260000, 303.747009, 303.747009, 0.000000, X, Y)
[Fri Oct  7 07:00:35 2011] Writing source region out to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src19_src.reg
[Fri Oct  7 07:00:35 2011] Extracting stamp from image fullrun_mos1_xmm0093640401_pi300-10000_cl_sm2.00.img.gz, (203, 296) - (238, 331)
[Fri Oct  7 07:00:35 2011] XMMSAS bgd. selection expression = annulus(19142.470800, 27225.260000, 506.245015, 1012.490029, X, Y)
[Fri Oct  7 07:00:35 2011] Writing fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src19.gif
[Fri Oct  7 07:04:20 2011] Mean detx,y = (-4910.48, 4552.87) 
[Fri Oct  7 07:04:21 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 07:04:29 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 07:04:29 2011] Setting source spectrum file to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Oct  7 07:04:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Oct  7 07:15:45 2011] Not generating rmf since there are only 24 counts
[Fri Oct  7 07:15:45 2011] rmf not generated due to insufficient counts
[Fri Oct  7 07:35:58 2011] Updating aperture counts using extracted products
[Fri Oct  7 07:35:58 2011] Error reading totcts from fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Oct  7 07:35:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:35:58 2011] Using photon index=1.80, rate=0.00122, arf fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src19.arf
[Fri Oct  7 07:35:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 07:35:58 2011] Updating source flux to 2.1e-14
[Fri Oct  7 07:36:01 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting