[Fri Oct  7 00:41:17 2011] Detection parameters:
  Position = (215.3, 255.0) = 13 21 1.78 34 6 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 318.6 +/- 76.3
  Background counts = 4.8
  Rate = 0.02 +/- 0.004

[Fri Oct  7 00:41:18 2011] Off-axis axis estimate = 6.80'
[Fri Oct  7 01:47:02 2011] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 01:47:02 2011] Initial guess for spatial extent in simple fitting = 9.83"
[Fri Oct  7 01:47:02 2011] source mask rpix=2.3, npix_max = 30, mask sum = 16, frac = 0.525
[Fri Oct  7 01:47:02 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.83"
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src3.ximg exists
[Fri Oct  7 02:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src3.csv
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Oct  7 02:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src3.csv
[Fri Oct  7 02:33:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct  7 02:33:33 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct  7 02:33:33 2011] Fit fullrun_mos1_xmm0093640401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct  7 03:31:14 2011] Warning, spatial fit 3 centroid is now closest to src. 24
[Fri Oct  7 03:31:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:31:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:31:14 2011] Assessing source extent using major
[Fri Oct  7 03:31:14 2011] Source does appear to be extended
[Fri Oct  7 03:31:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 04:45:27 2011] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 04:45:27 2011] Initial guess for spatial extent in simple fitting = 9.83"
[Fri Oct  7 04:45:27 2011] source mask rpix=2.3, npix_max = 30, mask sum = 16, frac = 0.525
[Fri Oct  7 04:45:27 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.83"
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Oct  7 05:28:13 2011] Fit fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct  7 05:28:13 2011] fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct  7 05:28:13 2011] Fit fullrun_mos1_xmm0093640401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct  7 06:15:47 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.744161 pixels away
[Fri Oct  7 06:15:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 06:15:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 06:15:47 2011] Assessing source extent using major
[Fri Oct  7 06:15:47 2011] Source does appear to be extended
[Fri Oct  7 06:15:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 07:00:35 2011] XMMSAS src. selection expression = ellipse(18685.746475, 22135.210983, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct  7 07:00:35 2011] Writing source region out to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src1_src.reg
[Fri Oct  7 07:00:35 2011] Extracting stamp from image fullrun_mos1_xmm0093640401_pi300-10000_cl_sm2.00.img.gz, (178, 217) - (253, 292)
[Fri Oct  7 07:00:35 2011] XMMSAS bgd. selection expression = annulus(18685.746475, 22135.210983, 1087.500000, 2175.000000, X, Y) && !ellipse(21091.763820, 22180.714800, 320.943209, 320.943209, 0.000000, X, Y)
[Fri Oct  7 07:00:35 2011] Writing fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src1.gif
[Fri Oct  7 07:01:03 2011] Mean detx,y = (-443.48, 6640.33) 
[Fri Oct  7 07:01:04 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 07:01:28 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 07:01:28 2011] Setting source spectrum file to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Oct  7 07:01:28 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Oct  7 07:11:28 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Oct  7 07:11:28 2011] rmf not generated due to insufficient counts
[Fri Oct  7 07:35:58 2011] Updating aperture counts using extracted products
[Fri Oct  7 07:35:58 2011] Error reading totcts from fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Oct  7 07:35:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:35:58 2011] Using photon index=1.80, rate=0.0161, arf fullrun_mos1_xmm0093640401_pi300-10000_pass1_cl_src1.arf
[Fri Oct  7 07:35:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 07:35:58 2011] Updating source flux to 2.4e-13
[Fri Oct  7 07:36:01 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting