[Sat Sep  1 06:00:32 2012] Detection parameters:
  Position = (319.1, 389.4) = 10 19 55.67 8 18 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 12.9
  Background counts = 41.8
  Rate = 0.004 +/- 0.0008

[Sat Sep  1 06:00:32 2012] Off-axis axis estimate = 6.77'
[Sat Sep  1 06:17:10 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 06:17:10 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Sat Sep  1 06:17:10 2012] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.955
[Sat Sep  1 06:17:10 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.81"
[Sat Sep  1 06:25:03 2012] fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_src7.ximg exists
[Sat Sep  1 06:25:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_src7.csv
[Sat Sep  1 06:25:03 2012] fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Sep  1 06:25:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_src7.csv
[Sat Sep  1 06:25:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 06:25:03 2012] fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Sep  1 06:25:03 2012] fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Sep  1 06:25:03 2012] Fit fullrun_mos2_xmm0093640301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Sep  1 06:25:07 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.424169 pixels away
[Sat Sep  1 06:25:07 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 06:25:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 06:25:07 2012] Assessing source extent using major
[Sat Sep  1 06:25:07 2012] Source does appear to be extended
[Sat Sep  1 06:25:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 06:41:28 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 06:41:28 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Sat Sep  1 06:41:28 2012] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.955
[Sat Sep  1 06:41:28 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.81"
[Sat Sep  1 06:49:05 2012] fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_src6.ximg exists
[Sat Sep  1 06:49:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_src6.csv
[Sat Sep  1 06:49:05 2012] fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Sep  1 06:49:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_src6.csv
[Sat Sep  1 06:49:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 06:49:05 2012] fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Sep  1 06:49:05 2012] fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Sep  1 06:49:05 2012] Fit fullrun_mos2_xmm0093640301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Sep  1 06:49:09 2012] Spatial fit model total counts = 149.823000, observed total counts = 148.000000
[Sat Sep  1 06:49:09 2012] Offset between fit and detection position for source 5 = 0.361877 pixels
[Sat Sep  1 06:49:09 2012] 151.086800 total counts/ 118.035000 bgd. counts: snr = 3.042214
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.361877 pixels
  Position = (318.7, 389.6) = 10 19 55.77 8 18 32.5
  Extent = 4.7 (3.1-6.4)", rotation angle = 0
  Source counts = 33.1 +/- 12.3
  Background counts = 118.0
  Rate = 0.002 +/- 0.0007
[Sat Sep  1 06:49:09 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 06:49:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 06:49:09 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 06:49:09 2012] Source does appear to be extended
[Sat Sep  1 06:49:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 06:53:07 2012] XMMSAS src. selection expression = ellipse(27681.261600, 33844.071000, 280.439408, 280.439408, 0.000000, X, Y)
[Sat Sep  1 06:53:07 2012] Writing source region out to fullrun_mos2_xmm0093640301_pi300-10000_pass1_cl_src5_src.reg
[Sat Sep  1 06:53:07 2012] Extracting stamp from image fullrun_mos2_xmm0093640301_pi300-10000_cl_sm2.00.img.gz, (303, 373) - (335, 406)
[Sat Sep  1 06:53:07 2012] XMMSAS bgd. selection expression = annulus(27681.261600, 33844.071000, 467.399013, 934.798027, X, Y)
[Sat Sep  1 06:53:07 2012] Writing fullrun_mos2_xmm0093640301_pi300-10000_pass1_cl_src5.gif
[Sat Sep  1 06:54:21 2012] Mean detx,y = (-3444.48, 5032.39) 
[Sat Sep  1 06:54:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 06:54:26 2012] grppha failed
[Sat Sep  1 06:54:26 2012] Setting source spectrum file to fullrun_mos2_xmm0093640301_pi300-10000_pass1_cl_src5_src.pi.gz
[Sat Sep  1 06:54:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093640301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Sep  1 06:54:56 2012] Not generating rmf since there are only 33 counts
[Sat Sep  1 06:54:56 2012] rmf not generated due to insufficient counts
[Sat Sep  1 06:55:18 2012] Updating aperture counts using extracted products
[Sat Sep  1 06:55:18 2012] Error reading totcts from fullrun_mos2_xmm0093640301_pi300-10000_pass1_cl_src5_src.pi.gz
[Sat Sep  1 06:55:18 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 06:55:19 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep  1 06:55:20 2012] xmm0093640301/analysis//spectral/fullrun_mos2_xmm0093640301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete