[Thu Sep 29 21:56:26 2011] Detection parameters:
  Position = (88.6, 301.1) = 2 42 1.50 -8 13 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.9 +/- 8.5
  Background counts = 2.6
  Rate = 0.003 +/- 0.0005

[Thu Sep 29 21:56:27 2011] Off-axis axis estimate = 15.21'
[Thu Sep 29 23:21:04 2011] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:21:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 23:21:04 2011] Initial guess for spatial extent in simple fitting = 14.03"
[Thu Sep 29 23:21:04 2011] source mask rpix=3.2, npix_max = 55, mask sum = 45, frac = 0.810
[Thu Sep 29 23:21:04 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 14.03"
[Thu Sep 29 23:54:37 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src12.ximg exists
[Thu Sep 29 23:54:37 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Sep 29 23:54:37 2011] Fit fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src12 appears to have run properly
[Thu Sep 29 23:54:38 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Sep 29 23:54:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Sep 29 23:54:38 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Sep 29 23:54:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Sep 29 23:54:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:54:52 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 18.449535 pixels away
[Thu Sep 29 23:54:52 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:54:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:54:52 2011] Assessing source extent using major
[Thu Sep 29 23:54:52 2011] Source does appear to be extended
[Thu Sep 29 23:54:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:22:05 2011] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 01:22:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 01:22:05 2011] Initial guess for spatial extent in simple fitting = 14.03"
[Fri Sep 30 01:22:05 2011] source mask rpix=3.2, npix_max = 55, mask sum = 45, frac = 0.810
[Fri Sep 30 01:22:05 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 14.03"
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Sep 30 01:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src12.csv
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Sep 30 01:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src12.csv
[Fri Sep 30 01:52:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Sep 30 01:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Sep 30 01:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Sep 30 01:52:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:52:21 2011] Spatial fit model total counts = 62.806400, observed total counts = 71.000000
[Fri Sep 30 01:52:21 2011] Offset between fit and detection position for source 2 = 0.259380 pixels
[Fri Sep 30 01:52:21 2011] 66.531600 total counts/ 38.637400 bgd. counts: snr = 4.487557
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.259380 pixels
  Position = (88.8, 301.3) = 2 42 1.44 -8 13 57.7
  Extent = 3.5 (3.5-4.6)", rotation angle = 0
  Source counts = 27.9 +/- 8.2
  Background counts = 38.6
  Rate = 0.002 +/- 0.0005
[Fri Sep 30 01:52:21 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 01:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 01:52:21 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 01:52:21 2011] Source does appear to be extended
[Fri Sep 30 01:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:48:12 2011] XMMSAS src. selection expression = ellipse(7680.611800, 26163.145400, 211.121406, 211.121406, 0.000000, X, Y)
[Fri Sep 30 02:48:12 2011] Writing source region out to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src2_src.reg
[Fri Sep 30 02:48:12 2011] Extracting stamp from image fullrun_mos2_xmm0093630101_pi300-10000_cl_sm2.00.img.gz, (77, 289) - (101, 313)
[Fri Sep 30 02:48:12 2011] XMMSAS bgd. selection expression = annulus(7680.611800, 26163.145400, 351.869010, 703.738020, X, Y)
[Fri Sep 30 02:48:12 2011] Writing fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src2.gif
[Fri Sep 30 02:51:07 2011] Mean detx,y = (-16761.23, 1617.35) 
[Fri Sep 30 02:51:09 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 02:51:16 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 02:51:16 2011] Setting source spectrum file to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Sep 30 02:51:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Sep 30 03:01:27 2011] Not generating rmf since there are only 27 counts
[Fri Sep 30 03:01:27 2011] rmf not generated due to insufficient counts
[Fri Sep 30 03:02:24 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:02:24 2011] Error reading totcts from fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Sep 30 03:02:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:02:25 2011] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src2.arf
[Fri Sep 30 03:02:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:02:25 2011] Updating source flux to 8e-14
[Fri Sep 30 03:02:53 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting