[Thu Sep 29 21:56:26 2011] Detection parameters:
  Position = (296.4, 288.0) = 2 41 0.61 -8 14 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.9 +/- 8.3
  Background counts = 6.2
  Rate = 0.002 +/- 0.0005

[Thu Sep 29 21:56:27 2011] Off-axis axis estimate = 0.77'
[Thu Sep 29 23:21:04 2011] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:21:04 2011] Initial guess for spatial extent in simple fitting = 6.81"
[Thu Sep 29 23:21:04 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Thu Sep 29 23:21:04 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 6.81"
[Thu Sep 29 23:54:37 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Sep 29 23:54:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src21.csv
[Thu Sep 29 23:54:37 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Sep 29 23:54:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src21.csv
[Thu Sep 29 23:54:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:54:38 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Sep 29 23:54:38 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Sep 29 23:54:38 2011] Fit fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Sep 29 23:54:52 2011] Source 14 is offset by 2.608919 and -5.925779 pixels which is larger than
2 X fitted extent = 1.445430 x 1.445430, not incorporating fit results
[Thu Sep 29 23:54:52 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:54:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:54:52 2011] Assessing source extent using major
[Thu Sep 29 23:54:52 2011] Source does appear to be extended
[Thu Sep 29 23:54:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:22:05 2011] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 01:22:05 2011] Initial guess for spatial extent in simple fitting = 6.81"
[Fri Sep 30 01:22:05 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Fri Sep 30 01:22:05 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 6.81"
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Sep 30 01:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src20.csv
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Sep 30 01:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src20.csv
[Fri Sep 30 01:52:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Sep 30 01:52:08 2011] Fit fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Sep 30 01:52:21 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 155.412747 pixels away
[Fri Sep 30 01:52:21 2011] Source 14 is offset by 6.687627 and 5.279394 pixels which is larger than
2 X fitted extent = 6.265196 x 6.265196, not incorporating fit results
[Fri Sep 30 01:52:21 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 01:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 01:52:21 2011] Assessing source extent using major
[Fri Sep 30 01:52:21 2011] Source does appear to be extended
[Fri Sep 30 01:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:48:13 2011] XMMSAS src. selection expression = ellipse(25740.253571, 25008.737244, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 30 02:48:13 2011] Writing source region out to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src14_src.reg
[Fri Sep 30 02:48:13 2011] Extracting stamp from image fullrun_mos2_xmm0093630101_pi300-10000_cl_sm2.00.img.gz, (259, 251) - (334, 326)
[Fri Sep 30 02:48:13 2011] XMMSAS bgd. selection expression = annulus(25740.253571, 25008.737244, 1087.500000, 2175.000000, X, Y) && !ellipse(24498.080600, 24520.798600, 458.999213, 458.999213, 0.000000, X, Y) && !ellipse(23903.825562, 23738.170319, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 02:48:13 2011] Writing fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src14.gif
[Fri Sep 30 02:53:20 2011] Mean detx,y = (1066.63, -697.40) 
[Fri Sep 30 02:53:21 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 02:53:29 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 02:53:29 2011] Setting source spectrum file to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Sep 30 02:53:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Sep 30 03:01:47 2011] Not generating rmf since there are only 29 counts
[Fri Sep 30 03:01:47 2011] rmf not generated due to insufficient counts
[Fri Sep 30 03:02:24 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:02:24 2011] Error reading totcts from fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Sep 30 03:02:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:02:25 2011] Using photon index=1.80, rate=0.00194, arf fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src14.arf
[Fri Sep 30 03:02:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:02:25 2011] Updating source flux to 2.1e-14
[Fri Sep 30 03:02:53 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting