[Thu Sep 29 21:56:26 2011] Detection parameters:
  Position = (282.1, 282.2) = 2 41 4.81 -8 15 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2513.5 +/- 59.6
  Background counts = 6.6
  Rate = 0.2 +/- 0.004

[Thu Sep 29 21:56:27 2011] Off-axis axis estimate = 1.67'
[Thu Sep 29 23:21:04 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:21:04 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Sep 29 23:21:04 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Sep 29 23:21:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Sep 29 23:54:37 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep 29 23:54:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 23:54:37 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep 29 23:54:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 23:54:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:54:37 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 23:54:37 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 23:54:37 2011] Fit fullrun_mos2_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 23:54:52 2011] Spatial fit model total counts = 2321.830000, observed total counts = 2325.000000
[Thu Sep 29 23:54:52 2011] Offset between fit and detection position for source 1 = 0.182733 pixels
[Thu Sep 29 23:54:52 2011] 2330.973000 total counts/ 562.213000 bgd. counts: snr = 74.596503
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.182733 pixels
  Position = (282.1, 282.4) = 2 41 4.79 -8 15 20.1
  Extent = 5.7 (5.5-6.0)", rotation angle = 0
  Source counts = 1768.8 +/- 48.3
  Background counts = 562.2
  Rate = 0.1 +/- 0.003
[Thu Sep 29 23:54:52 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:54:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:54:52 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:54:52 2011] Source does appear to be extended
[Thu Sep 29 23:54:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:22:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 01:22:05 2011] Initial guess for spatial extent in simple fitting = 5.75"
[Fri Sep 30 01:22:05 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.904
[Fri Sep 30 01:22:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.75"
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 30 01:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 30 01:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 01:52:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 01:52:08 2011] fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 01:52:08 2011] Fit fullrun_mos2_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 01:52:21 2011] Spatial fit model total counts = 2325.050000, observed total counts = 2325.000000
[Fri Sep 30 01:52:21 2011] Offset between fit and detection position for source 1 = 0.002351 pixels
[Fri Sep 30 01:52:21 2011] 2332.978000 total counts/ 561.658000 bgd. counts: snr = 74.741370
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002351 pixels
  Position = (282.1, 282.4) = 2 41 4.79 -8 15 20.1
  Extent = 5.7 (5.4-5.9)", rotation angle = 0
  Source counts = 1771.3 +/- 48.3
  Background counts = 561.7
  Rate = 0.1 +/- 0.003
[Fri Sep 30 01:52:21 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 01:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 01:52:21 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 01:52:21 2011] Source does appear to be extended
[Fri Sep 30 01:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:48:12 2011] Counts = 1771.320000, rescaling region sizes by 2.000000
[Fri Sep 30 02:48:12 2011] XMMSAS src. selection expression = ellipse(24498.080600, 24520.798600, 688.498820, 688.498820, 0.000000, X, Y)
[Fri Sep 30 02:48:12 2011] Writing source region out to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 02:48:12 2011] Extracting stamp from image fullrun_mos2_xmm0093630101_pi300-10000_cl_sm2.00.img.gz, (243, 243) - (322, 322)
[Fri Sep 30 02:48:12 2011] XMMSAS bgd. selection expression = annulus(24498.080600, 24520.798600, 2294.996066, 4589.992132, X, Y) && !ellipse(21478.456000, 25521.799200, 367.984011, 367.984011, 0.000000, X, Y) && !ellipse(24129.763200, 28139.266000, 259.399207, 259.399207, 0.000000, X, Y) && !ellipse(23903.825562, 23738.170319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25740.253571, 25008.737244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24188.470000, 28472.184600, 1024.424029, 1024.424029, 0.000000, X, Y)
[Fri Sep 30 02:48:12 2011] Writing fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 02:48:14 2011] Mean detx,y = (72.35, 15.42) 
[Fri Sep 30 02:48:16 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 02:48:34 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 02:48:34 2011] Setting source spectrum file to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 02:48:34 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 03:02:23 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:02:23 2011] Error reading totcts from fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 03:02:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:02:24 2011] Using photon index=1.80, rate=0.113, arf fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 03:02:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:02:24 2011] Updating source flux to 1.2e-12
[Fri Sep 30 03:03:09 2011] Reading fit data from xmm0093630101/analysis//spectral/fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 30 03:03:09 2011] Spectral fit parameter nH value = 945769000000.0
[Fri Sep 30 03:03:09 2011] Spectral fit parameter PhoIndex value = 0.257071
[Fri Sep 30 03:03:09 2011] Failed to get F(0.3-8.0) from xmm0093630101/analysis//spectral/fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 03:03:09 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:03:09 2011] Using Nh = 9.5e+11, photon index=0.26, rate=0.113, arf fullrun_mos2_xmm0093630101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 03:03:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:03:09 2011] Updating source flux to 2.7e-12