[Thu Sep 29 21:56:13 2011] Detection parameters:
  Position = (369.5, 288.6) = 2 40 39.20 -8 14 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.0 +/- 6.4
  Background counts = 4.2
  Rate = 0.002 +/- 0.0006

[Thu Sep 29 21:56:13 2011] Off-axis axis estimate = 5.20'
[Thu Sep 29 22:45:24 2011] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:45:24 2011] Initial guess for spatial extent in simple fitting = 9.03"
[Thu Sep 29 22:45:24 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Thu Sep 29 22:45:24 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 9.03"
[Thu Sep 29 23:21:04 2011] fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_src18.ximg exists
[Thu Sep 29 23:21:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_src18.csv
[Thu Sep 29 23:21:04 2011] fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Sep 29 23:21:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_src18.csv
[Thu Sep 29 23:21:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:21:04 2011] fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Sep 29 23:21:04 2011] fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Sep 29 23:21:04 2011] Fit fullrun_mos1_xmm0093630101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Sep 29 23:54:49 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.679433 pixels away
[Thu Sep 29 23:54:49 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:54:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:54:49 2011] Assessing source extent using major
[Thu Sep 29 23:54:49 2011] Source does appear to be extended
[Thu Sep 29 23:54:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:39:37 2011] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:39:37 2011] Initial guess for spatial extent in simple fitting = 9.03"
[Fri Sep 30 00:39:37 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Fri Sep 30 00:39:37 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 9.03"
[Fri Sep 30 01:22:05 2011] fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_src17.ximg exists
[Fri Sep 30 01:22:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_src17.csv
[Fri Sep 30 01:22:05 2011] fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Sep 30 01:22:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_src17.csv
[Fri Sep 30 01:22:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:22:05 2011] fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Sep 30 01:22:05 2011] fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Sep 30 01:22:05 2011] Fit fullrun_mos1_xmm0093630101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Sep 30 01:52:18 2011] Source 17 is offset by -7.821377 and 3.738329 pixels which is larger than
2 X fitted extent = 1.746143 x 1.746143, not incorporating fit results
[Fri Sep 30 01:52:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 01:52:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 01:52:18 2011] Assessing source extent using major
[Fri Sep 30 01:52:18 2011] Source does appear to be extended
[Fri Sep 30 01:52:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:28:56 2011] XMMSAS src. selection expression = ellipse(32095.982178, 25062.416626, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 30 02:28:56 2011] Writing source region out to fullrun_mos1_xmm0093630101_pi300-10000_pass1_cl_src17_src.reg
[Fri Sep 30 02:28:56 2011] Extracting stamp from image fullrun_mos1_xmm0093630101_pi300-10000_cl_sm2.00.img.gz, (332, 251) - (407, 326)
[Fri Sep 30 02:28:56 2011] XMMSAS bgd. selection expression = annulus(32095.982178, 25062.416626, 1087.500000, 2175.000000, X, Y) && !ellipse(32721.228800, 24788.467400, 399.328011, 399.328011, 0.000000, X, Y)
[Fri Sep 30 02:28:56 2011] Writing fullrun_mos1_xmm0093630101_pi300-10000_pass1_cl_src17.gif
[Fri Sep 30 02:33:31 2011] Mean detx,y = (-1683.62, -7695.72) 
[Fri Sep 30 02:33:32 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 02:34:02 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 02:34:02 2011] Setting source spectrum file to fullrun_mos1_xmm0093630101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Sep 30 02:34:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0093630101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Sep 30 02:47:53 2011] Not generating rmf since there are only 21 counts
[Fri Sep 30 02:47:53 2011] rmf not generated due to insufficient counts
[Fri Sep 30 03:02:21 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:02:21 2011] Error reading totcts from fullrun_mos1_xmm0093630101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Sep 30 03:02:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:02:22 2011] Using photon index=1.80, rate=0.00205, arf fullrun_mos1_xmm0093630101_pi300-10000_pass1_cl_src17.arf
[Fri Sep 30 03:02:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:02:23 2011] Updating source flux to 3e-14
[Fri Sep 30 03:02:27 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting