[Thu Aug  2 03:24:04 2012] Detection parameters:
  Position = (357.6, 448.0) = 16 38 18.94 -64 22 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35170.0 +/- 758.6
  Background counts = 255.1
  Rate = 3 +/- 0.06

[Thu Aug  2 03:24:04 2012] Off-axis axis estimate = 11.66'
[Thu Aug  2 03:26:26 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 03:26:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 03:26:26 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Thu Aug  2 03:26:26 2012] source mask rpix=2.8, npix_max = 44, mask sum = 26, frac = 0.590
[Thu Aug  2 03:26:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.26"
[Thu Aug  2 07:37:11 2012] fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 07:37:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 07:37:11 2012] fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 07:37:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 07:37:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 07:37:11 2012] fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 07:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug  2 07:37:11 2012] fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 07:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug  2 07:37:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 09:38:10 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Thu Aug  2 09:38:10 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 09:38:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 09:38:10 2012] Assessing source extent using major
[Thu Aug  2 09:38:10 2012] Source does appear to be extended
[Thu Aug  2 09:38:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 09:38:10 2012] Source is confused with source 3
[Thu Aug  2 09:38:10 2012] Source is confused with source 22
[Thu Aug  2 09:38:24 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 09:38:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 09:38:24 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Thu Aug  2 09:38:24 2012] source mask rpix=2.8, npix_max = 44, mask sum = 26, frac = 0.590
[Thu Aug  2 09:38:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.26"
[Thu Aug  2 11:40:37 2012] fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  2 11:40:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 11:40:37 2012] fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  2 11:40:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 11:40:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:40:37 2012] fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  2 11:40:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Aug  2 11:40:37 2012] fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  2 11:40:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Aug  2 11:40:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 13:46:22 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Thu Aug  2 13:46:22 2012] Spatial fit model total counts = 5810.310000, observed total counts = 3357.000000
[Thu Aug  2 13:46:22 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug  2 13:46:22 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 13:46:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 13:46:22 2012] Assessing source extent using major
[Thu Aug  2 13:46:22 2012] Source does appear to be extended
[Thu Aug  2 13:46:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 13:46:35 2012] Counts = 35170.007812, rescaling region sizes by 3.000000
[Thu Aug  2 13:46:35 2012] XMMSAS src. selection expression = ellipse(31059.408295, 38929.860321, 1957.500000, 1957.500000, 0.000000, X, Y)
[Thu Aug  2 13:46:35 2012] Writing source region out to fullrun_pn_xmm0093620201_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug  2 13:46:35 2012] Extracting stamp from image fullrun_pn_xmm0093620201_pi300-10000_cl_sm2.00.img.gz, (245, 336) - (470, 561)
[Thu Aug  2 13:46:35 2012] XMMSAS bgd. selection expression = annulus(31059.408295, 38929.860321, 9787.500000, 19575.000000, X, Y) && !ellipse(30015.562286, 39302.209595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29509.590698, 38769.839050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28333.245453, 38932.090546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29093.921967, 38919.593323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30248.004791, 38504.129028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30967.018585, 38084.780426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38870.400940, 36974.152466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40973.632843, 28581.665924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22866.625497, 28234.819558, 371.998237, 290.624566, 102.603570, X, Y) && !ellipse(18714.752200, 25483.557000, 436.050060, 436.050060, 0.000000, X, Y) && !ellipse(23466.535800, 24444.791600, 412.289612, 412.289612, 0.000000, X, Y) && !ellipse(23146.053650, 22534.419861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17420.478000, 20559.078000, 273.459208, 273.459208, 0.000000, X, Y) && !ellipse(18186.684800, 20070.610400, 462.055213, 462.055213, 0.000000, X, Y) && !ellipse(37098.114620, 19219.157200, 642.608597, 642.608597, 0.000000, X, Y) && !ellipse(30787.729767, 39333.560181, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 13:46:35 2012] Writing fullrun_pn_xmm0093620201_pi300-10000_pass1_cl_src1.gif
[Thu Aug  2 13:46:46 2012] Mean detx,y = (-7732.35, 13400.25) 
[Thu Aug  2 13:46:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 13:54:05 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 13:54:06 2012] Setting source spectrum file to fullrun_pn_xmm0093620201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 13:54:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093620201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  2 14:02:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 14:02:10 2012] rmf not generated due to insufficient counts
[Thu Aug  2 14:55:23 2012] Updating aperture counts using extracted products
[Thu Aug  2 14:55:23 2012] Error reading totcts from fullrun_pn_xmm0093620201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 14:55:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 14:55:23 2012] Using photon index=1.80, rate=2.66, arf fullrun_pn_xmm0093620201_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 14:55:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 14:55:23 2012] Updating source flux to 7.7e-11
[Thu Aug  2 14:56:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug  2 14:56:56 2012] xmm0093620201/analysis//spectral/fullrun_pn_xmm0093620201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete