[Thu Aug  2 03:24:43 2012] Detection parameters:
  Position = (356.5, 460.7) = 16 38 19.67 -64 21 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.4 +/- 23.5
  Background counts = 109.0
  Rate = 0.01 +/- 0.001

[Thu Aug  2 03:24:43 2012] Off-axis axis estimate = 12.49'
[Thu Aug  2 08:42:02 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 08:42:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 08:42:02 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Thu Aug  2 08:42:02 2012] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.030
[Thu Aug  2 08:42:02 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.68"
[Thu Aug  2 09:38:04 2012] fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Aug  2 09:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_src6.csv
[Thu Aug  2 09:38:04 2012] fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Aug  2 09:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_src6.csv
[Thu Aug  2 09:38:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 09:38:04 2012] fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Aug  2 09:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug  2 09:38:04 2012] fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Aug  2 09:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug  2 09:38:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093620201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 09:38:17 2012] Spatial fit model total counts = 2331.940000, observed total counts = 2261.000000
[Thu Aug  2 09:38:17 2012] Offset between fit and detection position for source 3 = 5.263734 pixels
[Thu Aug  2 09:38:17 2012] Warning, changing simple spatial fit ID from 6 to 5
[Thu Aug  2 09:38:17 2012] 2253.162500 total counts/ 2190.160000 bgd. counts: snr = 1.346232
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.263734 pixels
  Position = (353.2, 464.8) = 16 38 21.86 -64 21 1.0
  Extent = 16.5 (3.1-24.7)", rotation angle = 0
  Source counts = 63.0 +/- 47.5
  Background counts = 2190.2
  Rate = 0.004 +/- 0.003
  Deleting source due to low Poisson probability