[Sat Jul 14 03:41:20 2012] Detection parameters:
  Position = (284.4, 263.5) = 16 38 22.29 -64 22 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 472.8 +/- 41.7
  Background counts = 485.7
  Rate = 0.06 +/- 0.005

[Sat Jul 14 03:41:20 2012] Off-axis axis estimate = 2.73'
[Sat Jul 14 03:44:31 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 03:44:31 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Sat Jul 14 03:44:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.190
[Sat Jul 14 03:44:31 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.79"
[Sat Jul 14 06:21:01 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src29.ximg exists
[Sat Jul 14 06:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src29.csv
[Sat Jul 14 06:21:01 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Jul 14 06:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src29.csv
[Sat Jul 14 06:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 06:21:02 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Jul 14 06:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sat Jul 14 06:21:02 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Jul 14 06:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sat Jul 14 06:21:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 11:26:21 2012] Warning, spatial fit 29 centroid is now closest to src. 36
[Sat Jul 14 11:26:21 2012] Source 32 is offset by 4.777481 and -2.088318 pixels which is larger than
2 X fitted extent = 1.382593 x 0.926166, not incorporating fit results
[Sat Jul 14 11:26:21 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:26:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:26:21 2012] Assessing source extent using major
[Sat Jul 14 11:26:21 2012] Source does appear to be extended
[Sat Jul 14 11:26:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:26:21 2012] Source is confused with source 1
[Sat Jul 14 11:27:06 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 11:27:06 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Sat Jul 14 11:27:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.190
[Sat Jul 14 11:27:06 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.79"
[Sat Jul 14 14:07:32 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jul 14 14:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src20.csv
[Sat Jul 14 14:07:32 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jul 14 14:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src20.csv
[Sat Jul 14 14:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 14:07:33 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jul 14 14:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jul 14 14:07:33 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jul 14 14:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jul 14 14:07:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 18:16:24 2012] Warning, spatial fit 20 centroid is now closest to src. 36
[Sat Jul 14 18:16:24 2012] Source 32 is offset by -8.328312 and -1.805904 pixels which is larger than
2 X fitted extent = 3.983131 x 3.983131, not incorporating fit results
[Sat Jul 14 18:16:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 18:16:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 18:16:24 2012] Assessing source extent using major
[Sat Jul 14 18:16:24 2012] Source does appear to be extended
[Sat Jul 14 18:16:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 18:16:48 2012] XMMSAS src. selection expression = ellipse(24692.610870, 22874.712311, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 18:16:48 2012] Writing source region out to fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src32_src.reg
[Sat Jul 14 18:16:48 2012] Extracting stamp from image fullrun_pn_xmm0093620101_pi300-10000_cl_sm2.00.img.gz, (247, 226) - (322, 301)
[Sat Jul 14 18:16:48 2012] XMMSAS bgd. selection expression = annulus(24692.610870, 22874.712311, 1087.500000, 2175.000000, X, Y) && !ellipse(24136.775177, 23872.716583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24741.381104, 23827.865173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24349.062000, 27038.930000, 2307.680066, 2307.680066, 0.000000, X, Y) && !ellipse(23256.160370, 25874.730804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24982.773000, 25859.621600, 1080.192031, 1080.192031, 0.000000, X, Y) && !ellipse(26568.163391, 25797.286255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25761.652000, 25573.408000, 1042.232030, 1042.232030, 0.000000, X, Y) && !ellipse(25033.264600, 25954.842000, 1092.152031, 1092.152031, 0.000000, X, Y) && !ellipse(27226.005310, 25013.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23626.159943, 24920.425659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.423309, 24489.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24939.281677, 24221.919312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23111.283386, 23830.583923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22277.256378, 23824.599487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26178.906891, 22841.256287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23195.389404, 22661.149719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23743.055573, 22749.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.556915, 22234.430756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.393860, 22315.932190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26628.886566, 22160.587753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22421.318000, 22288.476800, 1198.936034, 1198.936034, 0.000000, X, Y) && !ellipse(23609.796997, 22318.257996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24781.206543, 21277.943176, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 18:16:48 2012] Writing fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src32.gif
[Sat Jul 14 18:27:25 2012] Mean detx,y = (64.03, -1640.24) 
[Sat Jul 14 18:27:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 18:27:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 18:27:46 2012] Setting source spectrum file to fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Jul 14 18:27:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat Jul 14 19:34:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 19:34:22 2012] rmf not generated due to insufficient counts
[Sun Jul 15 02:46:24 2012] Updating aperture counts using extracted products
[Sun Jul 15 02:46:24 2012] Error reading totcts from fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Jul 15 02:46:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 02:46:25 2012] Using photon index=1.80, rate=0.0591, arf fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src32.arf
[Sun Jul 15 02:46:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 02:46:25 2012] Updating source flux to 1.7e-13
[Sun Jul 15 02:50:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting