[Sat Jul 14 03:41:19 2012] Detection parameters:
  Position = (281.5, 311.9) = 16 38 24.19 -64 18 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.1 +/- 27.9
  Background counts = 312.6
  Rate = 0.01 +/- 0.003

[Sat Jul 14 03:41:20 2012] Off-axis axis estimate = 1.57'
[Sat Jul 14 03:44:31 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 03:44:31 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Sat Jul 14 03:44:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.074
[Sat Jul 14 03:44:31 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.21"
[Sat Jul 14 06:21:01 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jul 14 06:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src10.csv
[Sat Jul 14 06:21:01 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jul 14 06:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src10.csv
[Sat Jul 14 06:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 06:21:02 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jul 14 06:21:02 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jul 14 06:21:02 2012] Fit fullrun_pn_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Jul 14 11:26:21 2012] Spatial fit model total counts = 4238.050000, observed total counts = 4233.000000
[Sat Jul 14 11:26:21 2012] Offset between fit and detection position for source 10 = 7.248184 pixels
[Sat Jul 14 11:26:21 2012] 4177.590000 total counts/ 3931.990000 bgd. counts: snr = 3.916717
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 7.248184 pixels
  Position = (277.0, 317.6) = 16 38 27.20 -64 18 14.1
  Extent = 14.4 (14.4-28.8)", rotation angle = 0
  Source counts = 245.6 +/- 64.6
  Background counts = 3932.0
  Rate = 0.02 +/- 0.006
[Sat Jul 14 11:26:21 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:26:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:26:21 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 11:26:21 2012] Source does appear to be extended
[Sat Jul 14 11:26:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:27:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 11:27:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 11:27:06 2012] Initial guess for spatial extent in simple fitting = 14.42"
[Sat Jul 14 11:27:06 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.962
[Sat Jul 14 11:27:06 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.42"
[Sat Jul 14 14:07:31 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jul 14 14:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src6.csv
[Sat Jul 14 14:07:31 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jul 14 14:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src6.csv
[Sat Jul 14 14:07:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 14:07:32 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jul 14 14:07:32 2012] fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jul 14 14:07:32 2012] Fit fullrun_pn_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jul 14 18:16:24 2012] Warning, spatial fit 6 centroid is now closest to src. 11
[Sat Jul 14 18:16:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 18:16:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 18:16:24 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 18:16:24 2012] Source does appear to be extended
[Sat Jul 14 18:16:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 18:16:24 2012] Source is confused with source 11
[Sat Jul 14 18:16:47 2012] XMMSAS src. selection expression = ellipse(24051.498000, 27578.774000, 865.428025, 865.428025, 0.000000, X, Y)
[Sat Jul 14 18:16:47 2012] Writing source region out to fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src10_src.reg
[Sat Jul 14 18:16:47 2012] Extracting stamp from image fullrun_pn_xmm0093620101_pi300-10000_cl_sm2.00.img.gz, (227, 268) - (327, 367)
[Sat Jul 14 18:16:47 2012] XMMSAS bgd. selection expression = annulus(24051.498000, 27578.774000, 1442.380042, 2884.760083, X, Y) && !ellipse(24136.775177, 23872.716583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24741.381104, 23827.865173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24349.062000, 27038.930000, 2307.680066, 2307.680066, 0.000000, X, Y) && !ellipse(25419.336200, 26826.024600, 976.184028, 976.184028, 0.000000, X, Y) && !ellipse(26603.905396, 26476.994995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27213.271790, 26122.771606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23256.160370, 25874.730804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24982.773000, 25859.621600, 1080.192031, 1080.192031, 0.000000, X, Y) && !ellipse(26568.163391, 25797.286255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25761.652000, 25573.408000, 1042.232030, 1042.232030, 0.000000, X, Y) && !ellipse(25033.264600, 25954.842000, 1092.152031, 1092.152031, 0.000000, X, Y) && !ellipse(27226.005310, 25013.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23626.159943, 24920.425659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.423309, 24489.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24939.281677, 24221.919312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23111.283386, 23830.583923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22277.256378, 23824.599487, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 18:16:47 2012] Writing fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src10.gif
[Sat Jul 14 18:18:30 2012] Mean detx,y = (771.98, 3063.68) 
[Sat Jul 14 18:18:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 18:18:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 18:18:48 2012] Setting source spectrum file to fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jul 14 18:18:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jul 15 02:46:24 2012] Updating aperture counts using extracted products
[Sun Jul 15 02:46:24 2012] Error reading totcts from fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jul 15 02:46:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 02:46:24 2012] Using photon index=1.80, rate=0.0232, arf fullrun_pn_xmm0093620101_pi300-10000_pass1_cl_src10.arf
[Sun Jul 15 02:46:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 02:46:25 2012] Updating source flux to 6.7e-14
[Sun Jul 15 02:50:49 2012] Flag c found in src. 10 procflags, skipping spectral fitting