[Sat Jul 14 03:42:15 2012] Detection parameters:
  Position = (273.0, 276.0) = 16 38 29.94 -64 21 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.3 +/- 32.4
  Background counts = 263.0
  Rate = 0.02 +/- 0.002

[Sat Jul 14 03:42:16 2012] Off-axis axis estimate = 2.46'
[Sat Jul 14 09:18:06 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 09:18:06 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sat Jul 14 09:18:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Sat Jul 14 09:18:06 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.66"
[Sat Jul 14 11:26:00 2012] fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jul 14 11:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_src6.csv
[Sat Jul 14 11:26:00 2012] fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jul 14 11:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_src6.csv
[Sat Jul 14 11:26:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 11:26:01 2012] fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jul 14 11:26:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jul 14 11:26:01 2012] fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jul 14 11:26:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jul 14 11:26:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 11:26:46 2012] Warning, spatial fit 6 centroid is now closest to src. 26
[Sat Jul 14 11:26:46 2012] Source 5 is offset by 0.570376 and -1.366860 pixels which is larger than
2 X fitted extent = 0.863972 x 0.863972, not incorporating fit results
[Sat Jul 14 11:26:46 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:26:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:26:46 2012] Assessing source extent using major
[Sat Jul 14 11:26:46 2012] Source does appear to be extended
[Sat Jul 14 11:26:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:26:46 2012] Source is confused with source 26
[Sat Jul 14 11:26:46 2012] Source is confused with source 21
[Sat Jul 14 16:50:17 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 16:50:17 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sat Jul 14 16:50:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Sat Jul 14 16:50:17 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.66"
[Sat Jul 14 18:16:14 2012] fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jul 14 18:16:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_src5.csv
[Sat Jul 14 18:16:14 2012] fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jul 14 18:16:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_src5.csv
[Sat Jul 14 18:16:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 18:16:15 2012] fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jul 14 18:16:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jul 14 18:16:15 2012] fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jul 14 18:16:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jul 14 18:16:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 18:16:37 2012] Spatial fit model total counts = 5070.500000, observed total counts = 4409.000000
[Sat Jul 14 18:16:37 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 18:16:37 2012] Warning, spatial fit 5 centroid is now closest to src. 26
[Sat Jul 14 18:16:37 2012] Source 5 is offset by -2.375045 and -2.019687 pixels which is larger than
2 X fitted extent = 1.674699 x 1.674699, not incorporating fit results
[Sat Jul 14 18:16:37 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 18:16:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 18:16:37 2012] Assessing source extent using major
[Sat Jul 14 18:16:37 2012] Source does appear to be extended
[Sat Jul 14 18:16:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 02:22:49 2012] XMMSAS src. selection expression = ellipse(23698.897125, 23963.075195, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 15 02:22:49 2012] Writing source region out to fullrun_mos2_xmm0093620101_pi300-10000_pass1_cl_src5_src.reg
[Sun Jul 15 02:22:49 2012] Extracting stamp from image fullrun_mos2_xmm0093620101_pi300-10000_cl_sm2.00.img.gz, (235, 238) - (310, 313)
[Sun Jul 15 02:22:49 2012] XMMSAS bgd. selection expression = annulus(23698.897125, 23963.075195, 1087.500000, 2175.000000, X, Y) && !ellipse(23915.629822, 25692.800232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24448.249939, 22934.086731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24739.989868, 23782.543823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25247.887600, 24038.419000, 948.624027, 948.624027, 0.000000, X, Y) && !ellipse(23919.997345, 23101.308441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25048.169739, 24835.626678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.063446, 24477.447296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23159.592200, 23866.006600, 723.676821, 723.676821, 0.000000, X, Y) && !ellipse(24258.715363, 26297.554840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25691.284210, 23188.210205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24681.024323, 25774.960114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26327.012000, 24654.786000, 1141.376033, 1141.376033, 0.000000, X, Y) && !ellipse(23738.802216, 24473.228455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.214203, 25358.617004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23540.182129, 22573.329315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25044.285431, 22448.211060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22963.180542, 22926.604858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25098.665741, 26479.219910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26347.790649, 25428.112396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22553.687408, 22488.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26601.274600, 26116.914400, 1067.432031, 1067.432031, 0.000000, X, Y) && !ellipse(25827.938568, 26274.817169, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 02:22:49 2012] Writing fullrun_mos2_xmm0093620101_pi300-10000_pass1_cl_src5.gif
[Sun Jul 15 02:23:45 2012] Mean detx,y = (-1048.04, 355.21) 
[Sun Jul 15 02:23:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 02:23:54 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 02:23:54 2012] Setting source spectrum file to fullrun_mos2_xmm0093620101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jul 15 02:23:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093620101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jul 15 02:32:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 02:32:08 2012] rmf not generated due to insufficient counts
[Sun Jul 15 02:46:27 2012] Updating aperture counts using extracted products
[Sun Jul 15 02:46:27 2012] Error reading totcts from fullrun_mos2_xmm0093620101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jul 15 02:46:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 02:46:27 2012] Using photon index=1.80, rate=0.0219, arf fullrun_mos2_xmm0093620101_pi300-10000_pass1_cl_src5.arf
[Sun Jul 15 02:46:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 02:46:27 2012] Updating source flux to 2.2e-13
[Sun Jul 15 02:49:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting