[Sat Jul 14 03:41:50 2012] Detection parameters:
  Position = (192.5, 138.2) = 16 39 24.26 -64 31 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.3 +/- 14.7
  Background counts = 16.3
  Rate = 0.008 +/- 0.001

[Sat Jul 14 03:41:50 2012] Off-axis axis estimate = 13.93'
[Sat Jul 14 06:21:03 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 06:21:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 06:21:03 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Sat Jul 14 06:21:03 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.957
[Sat Jul 14 06:21:03 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 13.39"
[Sat Jul 14 09:18:05 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src40.ximg exists
[Sat Jul 14 09:18:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src40.csv
[Sat Jul 14 09:18:05 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src40_1.ximg exists
[Sat Jul 14 09:18:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src40.csv
[Sat Jul 14 09:18:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 09:18:06 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sat Jul 14 09:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Sat Jul 14 09:18:06 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sat Jul 14 09:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Sat Jul 14 09:18:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 11:26:36 2012] Spatial fit model total counts = 329.578000, observed total counts = 294.000000
[Sat Jul 14 11:26:36 2012] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 11:26:36 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:26:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:26:36 2012] Assessing source extent using major
[Sat Jul 14 11:26:36 2012] Source does appear to be extended
[Sat Jul 14 11:26:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 14:07:33 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:07:33 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Sat Jul 14 14:07:33 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.957
[Sat Jul 14 14:07:33 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 13.39"
[Sat Jul 14 16:50:16 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src32.ximg exists
[Sat Jul 14 16:50:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src32.csv
[Sat Jul 14 16:50:16 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Jul 14 16:50:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src32.csv
[Sat Jul 14 16:50:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:50:17 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Jul 14 16:50:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jul 14 16:50:17 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Jul 14 16:50:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jul 14 16:50:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 18:16:32 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 17.163974 pixels away
[Sat Jul 14 18:16:32 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 18:16:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 18:16:32 2012] Assessing source extent using major
[Sat Jul 14 18:16:32 2012] Source does appear to be extended
[Sat Jul 14 18:16:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 19:55:07 2012] XMMSAS src. selection expression = ellipse(16701.386871, 11972.271255, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 19:55:07 2012] Writing source region out to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src44_src.reg
[Sat Jul 14 19:55:07 2012] Extracting stamp from image fullrun_mos1_xmm0093620101_pi300-10000_cl_sm2.00.img.gz, (155, 101) - (230, 176)
[Sat Jul 14 19:55:07 2012] XMMSAS bgd. selection expression = annulus(16701.386871, 11972.271255, 1087.500000, 2175.000000, X, Y)
[Sat Jul 14 19:55:07 2012] Writing fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src44.gif
[Sat Jul 14 20:24:03 2012] Mean detx,y = (12544.32, 7790.82) 
[Sat Jul 14 20:24:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 20:24:24 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 20:24:25 2012] Setting source spectrum file to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jul 14 20:24:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun Jul 15 02:22:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 02:22:41 2012] rmf not generated due to insufficient counts
[Sun Jul 15 02:46:25 2012] Updating aperture counts using extracted products
[Sun Jul 15 02:46:25 2012] Error reading totcts from fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Jul 15 02:46:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 02:46:27 2012] Using photon index=1.80, rate=0.00844, arf fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src44.arf
[Sun Jul 15 02:46:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 02:46:27 2012] Updating source flux to 1.9e-13
[Sun Jul 15 02:46:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting