[Sat Jul 14 03:41:50 2012] Detection parameters:
  Position = (257.4, 258.0) = 16 38 40.40 -64 22 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 19.0
  Background counts = 189.8
  Rate = 0.009 +/- 0.002

[Sat Jul 14 03:41:50 2012] Off-axis axis estimate = 4.18'
[Sat Jul 14 06:21:03 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 06:21:03 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Sat Jul 14 06:21:03 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.828
[Sat Jul 14 06:21:03 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 8.52"
[Sat Jul 14 09:18:04 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src34.ximg exists
[Sat Jul 14 09:18:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src34.csv
[Sat Jul 14 09:18:04 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src34_1.ximg exists
[Sat Jul 14 09:18:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src34.csv
[Sat Jul 14 09:18:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 09:18:06 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sat Jul 14 09:18:06 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sat Jul 14 09:18:06 2012] Fit fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Sat Jul 14 11:26:36 2012] Spatial fit model total counts = 2302.590000, observed total counts = 2341.000000
[Sat Jul 14 11:26:36 2012] Offset between fit and detection position for source 38 = 7.301204 pixels
[Sat Jul 14 11:26:36 2012] 2366.894000 total counts/ 2185.600000 bgd. counts: snr = 3.877913
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 7.301204 pixels
  Position = (251.6, 253.5) = 16 38 44.25 -64 22 52.5
  Extent = 17.0 (17.0-34.1)", rotation angle = 0
  Source counts = 181.3 +/- 48.7
  Background counts = 2185.6
  Rate = 0.01 +/- 0.003
[Sat Jul 14 11:26:36 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:26:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:26:36 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 11:26:36 2012] Source does appear to be extended
[Sat Jul 14 11:26:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:26:36 2012] Source is confused with source 41
[Sat Jul 14 14:07:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:07:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 14:07:33 2012] Initial guess for spatial extent in simple fitting = 17.03"
[Sat Jul 14 14:07:33 2012] source mask rpix=3.9, npix_max = 77, mask sum = 77, frac = 0.987
[Sat Jul 14 14:07:33 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 17.03"
[Sat Jul 14 16:50:16 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src29.ximg exists
[Sat Jul 14 16:50:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src29.csv
[Sat Jul 14 16:50:16 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Jul 14 16:50:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src29.csv
[Sat Jul 14 16:50:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:50:17 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Jul 14 16:50:17 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Jul 14 16:50:17 2012] Fit fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Jul 14 18:16:32 2012] Spatial fit model total counts = 5216.550000, observed total counts = 5238.000000
[Sat Jul 14 18:16:32 2012] Offset between fit and detection position for source 38 = 8.874675 pixels
[Sat Jul 14 18:16:32 2012] Warning, changing simple spatial fit ID from 29 to 16
[Sat Jul 14 18:16:32 2012] 5390.816000 total counts/ 4875.170000 bgd. counts: snr = 7.385107
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 8.874675 pixels
  Position = (246.3, 246.4) = 16 38 47.82 -64 23 23.4
  Extent = 33.2 (33.2-66.4)", rotation angle = 0
  Source counts = 515.6 +/- 73.4
  Background counts = 4875.2
  Rate = 0.04 +/- 0.005
[Sat Jul 14 18:16:32 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 18:16:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 18:16:32 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 18:16:32 2012] Source does appear to be extended
[Sat Jul 14 18:16:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 19:55:07 2012] XMMSAS src. selection expression = ellipse(21383.276000, 21387.682000, 1991.556057, 1991.556057, 0.000000, X, Y)
[Sat Jul 14 19:55:07 2012] Writing source region out to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src38_src.reg
[Sat Jul 14 19:55:07 2012] Extracting stamp from image fullrun_mos1_xmm0093620101_pi300-10000_cl_sm2.00.img.gz, (132, 132) - (361, 361)
[Sat Jul 14 19:55:07 2012] XMMSAS bgd. selection expression = annulus(21383.276000, 21387.682000, 3319.260096, 6638.520191, X, Y) && !ellipse(25325.302600, 23096.568000, 599.265617, 599.265617, 0.000000, X, Y) && !ellipse(25553.758000, 23430.824000, 1176.296034, 1176.296034, 0.000000, X, Y) && !ellipse(25420.469800, 22444.314000, 2151.992062, 294.073608, -0.000000, X, Y) && !ellipse(24664.215400, 23867.015400, 1180.256034, 1180.256034, 0.000000, X, Y) && !ellipse(24662.744446, 23012.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24306.430000, 23605.234000, 2509.712072, 2509.712072, 0.000000, X, Y) && !ellipse(25070.724000, 25062.346000, 1078.096031, 1078.096031, 0.000000, X, Y) && !ellipse(22703.608948, 22926.737610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.187600, 25114.598000, 1121.672032, 1121.672032, 0.000000, X, Y) && !ellipse(23174.572000, 23306.006000, 1321.064038, 1321.064038, 0.000000, X, Y) && !ellipse(24213.869263, 24741.991760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.344513, 25259.948151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22762.636000, 22114.770000, 1327.704038, 1327.704038, 0.000000, X, Y) && !ellipse(23996.118200, 23205.868600, 1599.696046, 1599.696046, 0.000000, X, Y) && !ellipse(23660.350000, 23573.604000, 2642.128076, 2642.128076, 0.000000, X, Y) && !ellipse(23608.602234, 24125.470062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.826000, 25059.034000, 1166.376034, 1166.376034, 0.000000, X, Y) && !ellipse(26500.696442, 25275.421661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.215485, 25863.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25796.983582, 24832.153900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.134552, 24151.027374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25973.293457, 25954.495850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25202.082000, 22190.143400, 1303.520038, 1303.520038, 0.000000, X, Y)
[Sat Jul 14 19:55:07 2012] Writing fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src38.gif
[Sat Jul 14 20:21:33 2012] Mean detx,y = (2959.24, 2847.55) 
[Sat Jul 14 20:21:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 20:23:41 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 20:23:41 2012] Setting source spectrum file to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jul 14 20:23:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sun Jul 15 02:46:25 2012] Updating aperture counts using extracted products
[Sun Jul 15 02:46:25 2012] Error reading totcts from fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sun Jul 15 02:46:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 02:46:27 2012] Using photon index=1.80, rate=0.0356, arf fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src38.arf
[Sun Jul 15 02:46:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 02:46:27 2012] Updating source flux to 3.4e-13
[Sun Jul 15 02:46:28 2012] Flag c found in src. 38 procflags, skipping spectral fitting