[Sat Jul 14 03:41:50 2012] Detection parameters:
  Position = (273.6, 271.0) = 16 38 29.49 -64 21 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218.7 +/- 30.9
  Background counts = 262.9
  Rate = 0.02 +/- 0.002

[Sat Jul 14 03:41:50 2012] Off-axis axis estimate = 2.68'
[Sat Jul 14 06:21:03 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 06:21:03 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sat Jul 14 06:21:03 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.957
[Sat Jul 14 06:21:03 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.77"
[Sat Jul 14 09:18:04 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jul 14 09:18:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src20.csv
[Sat Jul 14 09:18:04 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jul 14 09:18:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src20.csv
[Sat Jul 14 09:18:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 09:18:05 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jul 14 09:18:05 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jul 14 09:18:05 2012] Fit fullrun_mos1_xmm0093620101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Jul 14 11:26:36 2012] Spatial fit model total counts = 4244.170000, observed total counts = 4526.000000
[Sat Jul 14 11:26:36 2012] Offset between fit and detection position for source 37 = 5.770234 pixels
[Sat Jul 14 11:26:36 2012] Warning, changing simple spatial fit ID from 20 to 10
[Sat Jul 14 11:26:36 2012] 4144.240000 total counts/ 3087.930000 bgd. counts: snr = 19.008930
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 5.770234 pixels
  Position = (276.8, 266.2) = 16 38 27.36 -64 21 57.6
  Extent = 15.7 (15.6-31.4)", rotation angle = 0
  Source counts = 1056.3 +/- 64.4
  Background counts = 3087.9
  Rate = 0.07 +/- 0.004
[Sat Jul 14 11:26:36 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:26:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:26:36 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 11:26:36 2012] Source does appear to be extended
[Sat Jul 14 11:26:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:26:36 2012] Source is confused with source 9
[Sat Jul 14 14:07:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:07:33 2012] Initial guess for spatial extent in simple fitting = 15.69"
[Sat Jul 14 14:07:33 2012] source mask rpix=3.6, npix_max = 67, mask sum = 56, frac = 0.830
[Sat Jul 14 14:07:33 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 15.69"
[Sat Jul 14 16:50:15 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jul 14 16:50:15 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jul 14 16:50:15 2012] Fit fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_src17 appears to have run properly
[Sat Jul 14 16:50:16 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jul 14 16:50:16 2012] fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jul 14 16:50:17 2012] Fit fullrun_mos1_xmm0093620101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Jul 14 18:16:32 2012] Source 37 is offset by -0.074669 and 7.292522 pixels which is larger than
2 X fitted extent = 1.820060 x 1.820060, not incorporating fit results
[Sat Jul 14 18:16:32 2012] Spatial fit model total counts = 4365.600000, observed total counts = 4486.000000
[Sat Jul 14 18:16:32 2012] Offset between fit and detection position for source 37 = 1.207163 pixels
[Sat Jul 14 18:16:32 2012] Warning, changing simple spatial fit ID from 17 to 8
[Sat Jul 14 18:16:32 2012] 4376.078000 total counts/ 3711.890000 bgd. counts: snr = 10.901681
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 1.207163 pixels
  Position = (276.4, 267.3) = 16 38 27.66 -64 21 52.7
  Extent = 20.0 (19.9-20.0)", rotation angle = 0
  Source counts = 664.2 +/- 66.2
  Background counts = 3711.9
  Rate = 0.05 +/- 0.005
[Sat Jul 14 18:16:32 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 18:16:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 18:16:32 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 18:16:32 2012] Source does appear to be extended
[Sat Jul 14 18:16:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 19:55:07 2012] XMMSAS src. selection expression = ellipse(23996.118200, 23205.868600, 1199.772035, 1199.772035, 0.000000, X, Y)
[Sat Jul 14 19:55:07 2012] Writing source region out to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src37_src.reg
[Sat Jul 14 19:55:07 2012] Extracting stamp from image fullrun_mos1_xmm0093620101_pi300-10000_cl_sm2.00.img.gz, (207, 198) - (345, 336)
[Sat Jul 14 19:55:07 2012] XMMSAS bgd. selection expression = annulus(23996.118200, 23205.868600, 1999.620058, 3999.240115, X, Y) && !ellipse(25325.302600, 23096.568000, 599.265617, 599.265617, 0.000000, X, Y) && !ellipse(25553.758000, 23430.824000, 1176.296034, 1176.296034, 0.000000, X, Y) && !ellipse(25420.469800, 22444.314000, 2151.992062, 294.073608, -0.000000, X, Y) && !ellipse(24664.215400, 23867.015400, 1180.256034, 1180.256034, 0.000000, X, Y) && !ellipse(24662.744446, 23012.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24306.430000, 23605.234000, 2509.712072, 2509.712072, 0.000000, X, Y) && !ellipse(25070.724000, 25062.346000, 1078.096031, 1078.096031, 0.000000, X, Y) && !ellipse(22703.608948, 22926.737610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.187600, 25114.598000, 1121.672032, 1121.672032, 0.000000, X, Y) && !ellipse(23174.572000, 23306.006000, 1321.064038, 1321.064038, 0.000000, X, Y) && !ellipse(24213.869263, 24741.991760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.344513, 25259.948151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22762.636000, 22114.770000, 1327.704038, 1327.704038, 0.000000, X, Y) && !ellipse(23660.350000, 23573.604000, 2642.128076, 2642.128076, 0.000000, X, Y) && !ellipse(23608.602234, 24125.470062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.826000, 25059.034000, 1166.376034, 1166.376034, 0.000000, X, Y) && !ellipse(26500.696442, 25275.421661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.215485, 25863.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25796.983582, 24832.153900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.134552, 24151.027374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25973.293457, 25954.495850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21383.276000, 21387.682000, 2655.408076, 2655.408076, 0.000000, X, Y) && !ellipse(25202.082000, 22190.143400, 1303.520038, 1303.520038, 0.000000, X, Y)
[Sat Jul 14 19:55:07 2012] Writing fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src37.gif
[Sat Jul 14 20:08:35 2012] Mean detx,y = (1261.89, 486.53) 
[Sat Jul 14 20:08:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 20:08:48 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 20:08:48 2012] Setting source spectrum file to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Jul 14 20:08:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun Jul 15 02:46:25 2012] Updating aperture counts using extracted products
[Sun Jul 15 02:46:25 2012] Error reading totcts from fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Jul 15 02:46:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 02:46:26 2012] Using photon index=1.80, rate=0.0458, arf fullrun_mos1_xmm0093620101_pi300-10000_pass1_cl_src37.arf
[Sun Jul 15 02:46:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 02:46:26 2012] Updating source flux to 4.2e-13
[Sun Jul 15 02:46:28 2012] Flag b found in src. 37 procflags, skipping spectral fitting
[Sun Jul 15 02:46:28 2012] Flag c found in src. 37 procflags, skipping spectral fitting