[Sun Jun  2 01:17:16 2013] Detection parameters:
  Position = (352.8, 387.2) = 23 33 26.25 48 55 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.3 +/- 17.4
  Background counts = 47.6
  Rate = 0.01 +/- 0.001

[Sun Jun  2 01:17:17 2013] Off-axis axis estimate = 7.55'
[Sun Jun  2 01:21:42 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 01:21:42 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Sun Jun  2 01:21:42 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.112
[Sun Jun  2 01:21:42 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.20"
[Sun Jun  2 02:31:13 2013] fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun  2 02:31:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_src11.csv
[Sun Jun  2 02:31:13 2013] fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun  2 02:31:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_src11.csv
[Sun Jun  2 02:31:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 02:31:13 2013] fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun  2 02:31:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun  2 02:31:13 2013] fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun  2 02:31:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun  2 02:31:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 04:13:53 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.157302 pixels away
[Sun Jun  2 04:13:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 04:13:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 04:13:53 2013] Assessing source extent using major
[Sun Jun  2 04:13:53 2013] Source does appear to be extended
[Sun Jun  2 04:13:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 04:14:21 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 04:14:21 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Sun Jun  2 04:14:21 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.112
[Sun Jun  2 04:14:21 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.20"
[Sun Jun  2 05:17:51 2013] fullrun_pn_xmm0093552701_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun  2 05:17:51 2013] fullrun_pn_xmm0093552701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun  2 05:17:51 2013] Fit fullrun_pn_xmm0093552701_pi300-10000_cl_pass1_src11 appears to have run properly
[Sun Jun  2 05:17:51 2013] fullrun_pn_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun  2 05:17:51 2013] fullrun_pn_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun  2 05:17:51 2013] Fit fullrun_pn_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jun  2 06:40:32 2013] Spatial fit model total counts = 400.525000, observed total counts = 379.000000
[Sun Jun  2 06:40:32 2013] Offset between fit and detection position for source 11 = 0.230156 pixels
[Sun Jun  2 06:40:32 2013] 396.757800 total counts/ 303.432000 bgd. counts: snr = 5.357609
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.230156 pixels
  Position = (352.9, 387.4) = 23 33 26.20 48 55 17.6
  Extent = 6.4 (4.9-8.5)" x 4.3 (3.2-5.7)", rotation angle = 40 (13-71) degrees
  Source counts = 93.3 +/- 19.9
  Background counts = 303.4
  Rate = 0.005 +/- 0.001
[Sun Jun  2 06:40:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:40:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:40:32 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 06:40:32 2013] Source does appear to be extended
[Sun Jun  2 06:40:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Sun Jun  2 06:40:58 2013] XMMSAS src. selection expression = ellipse(30655.477600, 33658.005200, 386.538611, 255.252607, 40.492952, X, Y)
[Sun Jun  2 06:40:58 2013] Writing source region out to fullrun_pn_xmm0093552701_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun  2 06:40:58 2013] Extracting stamp from image fullrun_pn_xmm0093552701_pi300-10000_cl_sm2.00.img.gz, (331, 365) - (375, 410)
[Sun Jun  2 06:40:58 2013] XMMSAS bgd. selection expression = annulus(30655.477600, 33658.005200, 644.231019, 1288.462037, X, Y)
[Sun Jun  2 06:40:58 2013] Writing fullrun_pn_xmm0093552701_pi300-10000_pass1_cl_src11.gif
[Sun Jun  2 06:51:38 2013] Mean detx,y = (-3576.72, -7239.07) 
[Sun Jun  2 06:51:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 06:51:59 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 06:52:00 2013] Setting source spectrum file to fullrun_pn_xmm0093552701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun  2 06:52:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093552701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun  2 07:14:19 2013] Not generating rmf since there are only 93 counts
[Sun Jun  2 07:14:19 2013] rmf not generated due to insufficient counts
[Sun Jun  2 08:12:01 2013] Updating aperture counts using extracted products
[Sun Jun  2 08:12:01 2013] Total counts from fullrun_pn_xmm0093552701_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 138.00
[Sun Jun  2 08:12:01 2013] Total counts from fullrun_pn_xmm0093552701_pi300-10000_pass1_cl_src11_bgd.pi.gz = 494.00
[Sun Jun  2 08:12:01 2013] Got source and background scale factors 308800.000000, 2945586.000000
[Sun Jun  2 08:12:01 2013] User source parameters:
  Position = (352.9, 387.4) = 23 33 26.20 48 55 17.6
  Extent = 6.4 (4.9-8.5)" x 4.3 (3.2-5.7)", rotation angle = 40 (13-71) degrees
  Source aperture counts = 86.2 +/- 12.8
  Background aperture counts = 51.8
  Rate = 0.005 +/- 0.0007

[Sun Jun  2 08:12:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 08:12:08 2013] Using photon index=1.80, rate=0.00502, arf fullrun_pn_xmm0093552701_pi300-10000_pass1_cl_src11.arf
[Sun Jun  2 08:12:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 08:12:08 2013] Updating source flux to 3.6e-14
[Sun Jun  2 08:12:33 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 08:12:38 2013] xmm0093552701/analysis//spectral/fullrun_pn_xmm0093552701_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete