[Sun Jun  2 01:17:58 2013] Detection parameters:
  Position = (316.5, 185.6) = 23 33 42.33 48 40 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.4 +/- 9.7
  Background counts = 13.7
  Rate = 0.004 +/- 0.0008

[Sun Jun  2 01:17:59 2013] Off-axis axis estimate = 8.28'
[Sun Jun  2 02:31:14 2013] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 02:31:14 2013] Initial guess for spatial extent in simple fitting = 10.57"
[Sun Jun  2 02:31:14 2013] source mask rpix=2.4, npix_max = 34, mask sum = 26, frac = 0.757
[Sun Jun  2 02:31:14 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.57"
[Sun Jun  2 03:22:58 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun  2 03:22:58 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun  2 03:22:58 2013] Fit fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_src6 appears to have run properly
[Sun Jun  2 03:22:58 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun  2 03:22:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun  2 03:22:58 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun  2 03:22:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun  2 03:22:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 04:13:59 2013] Spatial fit model total counts = 157.457000, observed total counts = 147.000000
[Sun Jun  2 04:13:59 2013] Offset between fit and detection position for source 9 = 2.260190 pixels
[Sun Jun  2 04:13:59 2013] 162.284800 total counts/ 104.411000 bgd. counts: snr = 5.663813
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.260190 pixels
  Position = (314.9, 184.0) = 23 33 43.04 48 40 33.0
  Extent = 21.1 (16.8-42.3)" x 3.9 (2.6-5.9)", rotation angle = 138 (132-145) degrees
  Source counts = 57.9 +/- 12.7
  Background counts = 104.4
  Rate = 0.002 +/- 0.0005
[Sun Jun  2 04:13:59 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 04:13:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 04:13:59 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 04:13:59 2013] Source does appear to be extended
[Sun Jun  2 04:13:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.86
[Sun Jun  2 04:13:59 2013] Source is asymmetric
[Sun Jun  2 05:17:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 05:17:51 2013] Initial guess for spatial extent in simple fitting = 12.52"
[Sun Jun  2 05:17:51 2013] source mask rpix=2.9, npix_max = 45, mask sum = 37, frac = 0.811
[Sun Jun  2 05:17:51 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 12.52"
[Sun Jun  2 06:05:51 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun  2 06:05:51 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun  2 06:05:51 2013] Fit fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Jun  2 06:05:51 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun  2 06:05:51 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun  2 06:05:51 2013] Fit fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jun  2 06:40:39 2013] Spatial fit model total counts = 161.102000, observed total counts = 149.000000
[Sun Jun  2 06:40:39 2013] Offset between fit and detection position for source 9 = 2.691618 pixels
[Sun Jun  2 06:40:39 2013] 162.260100 total counts/ 116.009000 bgd. counts: snr = 4.294140
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.691618 pixels
  Position = (317.0, 185.6) = 23 33 42.09 48 40 39.9
  Extent = 9.4 (6.0-16.2)" x 4.6 (3.1-7.0)", rotation angle = 331 (309-359) degrees
  Source counts = 46.3 +/- 12.7
  Background counts = 116.0
  Rate = 0.002 +/- 0.0005
[Sun Jun  2 06:40:39 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:40:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:40:39 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 06:40:39 2013] Source does appear to be extended
[Sun Jun  2 06:40:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Sun Jun  2 07:20:53 2013] XMMSAS src. selection expression = ellipse(27532.336000, 16101.590800, 564.934816, 277.633208, 331.358020, X, Y)
[Sun Jun  2 07:20:53 2013] Writing source region out to fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src9_src.reg
[Sun Jun  2 07:20:53 2013] Extracting stamp from image fullrun_mos1_xmm0093552701_pi300-10000_cl_sm2.00.img.gz, (285, 153) - (349, 218)
[Sun Jun  2 07:20:53 2013] XMMSAS bgd. selection expression = annulus(27532.336000, 16101.590800, 941.558027, 1883.116054, X, Y)
[Sun Jun  2 07:20:53 2013] Writing fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src9.gif
[Sun Jun  2 07:23:28 2013] Mean detx,y = (-6785.70, 7012.85) 
[Sun Jun  2 07:23:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 07:24:03 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 07:24:03 2013] Setting source spectrum file to fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun  2 07:24:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jun  2 07:44:49 2013] Not generating rmf since there are only 46 counts
[Sun Jun  2 07:44:49 2013] rmf not generated due to insufficient counts
[Sun Jun  2 08:12:10 2013] Updating aperture counts using extracted products
[Sun Jun  2 08:12:10 2013] Total counts from fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 66.00
[Sun Jun  2 08:12:10 2013] Total counts from fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src9_bgd.pi.gz = 478.00
[Sun Jun  2 08:12:10 2013] Got source and background scale factors 372040.000000, 7095257.000000
[Sun Jun  2 08:12:10 2013] User source parameters:
  Position = (317.0, 185.6) = 23 33 42.09 48 40 39.9
  Extent = 9.4 (6.0-16.2)" x 4.6 (3.1-7.0)", rotation angle = 331 (309-359) degrees
  Source aperture counts = 40.9 +/- 9.2
  Background aperture counts = 25.1
  Rate = 0.002 +/- 0.0004

[Sun Jun  2 08:12:15 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 08:12:15 2013] Using photon index=1.80, rate=0.00193, arf fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src9.arf
[Sun Jun  2 08:12:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 08:12:15 2013] Updating source flux to 4.5e-14
[Sun Jun  2 08:12:23 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 08:12:28 2013] xmm0093552701/analysis//spectral/fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete