[Sun Jun  2 01:17:58 2013] Detection parameters:
  Position = (353.7, 387.1) = 23 33 25.85 48 55 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.5 +/- 9.7
  Background counts = 14.3
  Rate = 0.003 +/- 0.0006

[Sun Jun  2 01:17:59 2013] Off-axis axis estimate = 7.58'
[Sun Jun  2 02:31:14 2013] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 02:31:14 2013] Initial guess for spatial extent in simple fitting = 10.22"
[Sun Jun  2 02:31:14 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.109
[Sun Jun  2 02:31:14 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.22"
[Sun Jun  2 03:22:58 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun  2 03:22:58 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun  2 03:22:58 2013] Fit fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_src13 appears to have run properly
[Sun Jun  2 03:22:58 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun  2 03:22:58 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun  2 03:22:59 2013] Fit fullrun_mos1_xmm0093552701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Jun  2 04:13:59 2013] Spatial fit model total counts = 173.923000, observed total counts = 160.000000
[Sun Jun  2 04:13:59 2013] Offset between fit and detection position for source 11 = 0.329712 pixels
[Sun Jun  2 04:13:59 2013] 170.965300 total counts/ 132.931000 bgd. counts: snr = 3.298848
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.329712 pixels
  Position = (353.4, 387.2) = 23 33 26.00 48 55 16.5
  Extent = 7.0 (4.0-12.7)", rotation angle = 0
  Source counts = 38.0 +/- 13.1
  Background counts = 132.9
  Rate = 0.002 +/- 0.0005
[Sun Jun  2 04:13:59 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 04:13:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 04:13:59 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 04:13:59 2013] Source does appear to be extended
[Sun Jun  2 04:13:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 05:17:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 05:17:51 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Sun Jun  2 05:17:51 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.114
[Sun Jun  2 05:17:51 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.04"
[Sun Jun  2 06:05:51 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun  2 06:05:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src12.csv
[Sun Jun  2 06:05:51 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun  2 06:05:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src12.csv
[Sun Jun  2 06:05:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:05:51 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun  2 06:05:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Jun  2 06:05:51 2013] fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun  2 06:05:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Jun  2 06:05:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093552701_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:40:39 2013] Warning, spatial fit 12 centroid is now closest to src. 4
[Sun Jun  2 06:40:39 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:40:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:40:39 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 06:40:39 2013] Source does appear to be extended
[Sun Jun  2 06:40:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 07:20:53 2013] XMMSAS src. selection expression = ellipse(30696.034200, 33637.133400, 422.411412, 422.411412, 0.000000, X, Y)
[Sun Jun  2 07:20:53 2013] Writing source region out to fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun  2 07:20:53 2013] Extracting stamp from image fullrun_mos1_xmm0093552701_pi300-10000_cl_sm2.00.img.gz, (329, 363) - (378, 411)
[Sun Jun  2 07:20:53 2013] XMMSAS bgd. selection expression = annulus(30696.034200, 33637.133400, 704.019020, 1408.038041, X, Y)
[Sun Jun  2 07:20:53 2013] Writing fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src11.gif
[Sun Jun  2 07:26:17 2013] Mean detx,y = (7300.35, -3864.01) 
[Sun Jun  2 07:26:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 07:26:49 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 07:26:50 2013] Setting source spectrum file to fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun  2 07:26:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun  2 07:45:35 2013] Not generating rmf since there are only 38 counts
[Sun Jun  2 07:45:35 2013] rmf not generated due to insufficient counts
[Sun Jun  2 08:12:12 2013] Updating aperture counts using extracted products
[Sun Jun  2 08:12:12 2013] Total counts from fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 74.00
[Sun Jun  2 08:12:12 2013] Total counts from fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src11_bgd.pi.gz = 323.00
[Sun Jun  2 08:12:12 2013] Got source and background scale factors 558400.000000, 4061104.000000
[Sun Jun  2 08:12:12 2013] User source parameters:
  Position = (353.4, 387.2) = 23 33 26.00 48 55 16.5
  Extent = 7.0 (4.0-12.7)", rotation angle = 0
  Source aperture counts = 29.6 +/- 9.6
  Background aperture counts = 44.4
  Rate = 0.001 +/- 0.0004

[Sun Jun  2 08:12:15 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 08:12:15 2013] Using photon index=1.80, rate=0.00159, arf fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src11.arf
[Sun Jun  2 08:12:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 08:12:15 2013] Updating source flux to 3e-14
[Sun Jun  2 08:12:23 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 08:12:28 2013] xmm0093552701/analysis//spectral/fullrun_mos1_xmm0093552701_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete