[Fri May  3 15:11:16 2013] Detection parameters:
  Position = (245.7, 259.9) = 23 34 1.65 -15 20 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.1 +/- 10.0
  Background counts = 14.4
  Rate = 0.004 +/- 0.0008

[Fri May  3 15:11:17 2013] Off-axis axis estimate = 4.74'
[Fri May  3 15:13:00 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Fri May  3 15:13:00 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Fri May  3 15:13:00 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Fri May  3 15:13:00 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 8.80"
[Fri May  3 15:59:16 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src39.ximg exists
[Fri May  3 15:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src39.csv
[Fri May  3 15:59:16 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri May  3 15:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src39.csv
[Fri May  3 15:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:59:17 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri May  3 15:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src39.csv
[Fri May  3 15:59:17 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri May  3 15:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src39.csv
[Fri May  3 15:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 16:45:13 2013] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.059826 pixels away
[Fri May  3 16:45:13 2013] Vigneting correction estimate = 1.000000
[Fri May  3 16:45:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 16:45:13 2013] Assessing source extent using major
[Fri May  3 16:45:13 2013] Source does appear to be extended
[Fri May  3 16:45:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 16:45:28 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:45:28 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Fri May  3 16:45:28 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Fri May  3 16:45:28 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 8.80"
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src37.ximg exists
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri May  3 17:27:47 2013] Fit fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src37 appears to have run properly
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri May  3 17:27:47 2013] Fit fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri May  3 18:17:20 2013] Spatial fit model total counts = 164.642000, observed total counts = 155.000000
[Fri May  3 18:17:20 2013] Offset between fit and detection position for source 39 = 0.471630 pixels
[Fri May  3 18:17:20 2013] 163.871700 total counts/ 127.405000 bgd. counts: snr = 3.230749
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.471630 pixels
  Position = (246.1, 259.6) = 23 34 1.53 -15 20 52.7
  Extent = 6.0 (4.4-8.3)" x 2.8 (2.2-4.5)", rotation angle = 39 (18-59) degrees
  Source counts = 36.5 +/- 12.8
  Background counts = 127.4
  Rate = 0.002 +/- 0.0006
[Fri May  3 18:17:20 2013] Vigneting correction estimate = 1.000000
[Fri May  3 18:17:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 18:17:20 2013] Assessing source extent using major axis lower bound
[Fri May  3 18:17:20 2013] Source does appear to be extended
[Fri May  3 18:17:20 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Fri May  3 18:17:36 2013] XMMSAS src. selection expression = ellipse(21361.816400, 22540.076200, 360.240610, 168.279005, 38.771150, X, Y)
[Fri May  3 18:17:36 2013] Writing source region out to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src39_src.reg
[Fri May  3 18:17:36 2013] Extracting stamp from image fullrun_pn_xmm0093550401_pi300-10000_cl_sm2.00.img.gz, (225, 239) - (267, 280)
[Fri May  3 18:17:36 2013] XMMSAS bgd. selection expression = annulus(21361.816400, 22540.076200, 600.401017, 1200.802035, X, Y) && !ellipse(22321.161700, 21405.817000, 322.988009, 322.988009, 0.000000, X, Y)
[Fri May  3 18:17:36 2013] Writing fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src39.gif
[Fri May  3 18:38:43 2013] Mean detx,y = (-4262.70, 6160.33) 
[Fri May  3 18:38:45 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 18:38:53 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 18:38:53 2013] Setting source spectrum file to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Fri May  3 18:38:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Fri May  3 18:57:42 2013] Not generating rmf since there are only 36 counts
[Fri May  3 18:57:42 2013] rmf not generated due to insufficient counts
[Fri May  3 19:26:39 2013] Updating aperture counts using extracted products
[Fri May  3 19:26:39 2013] Total counts from fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 43.00
[Fri May  3 19:26:40 2013] Total counts from fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src39_bgd.pi.gz = 214.00
[Fri May  3 19:26:40 2013] Got source and background scale factors 196800.000000, 3027082.000000
[Fri May  3 19:26:40 2013] User source parameters:
  Position = (246.1, 259.6) = 23 34 1.53 -15 20 52.7
  Extent = 6.0 (4.4-8.3)" x 2.8 (2.2-4.5)", rotation angle = 39 (18-59) degrees
  Source aperture counts = 29.1 +/- 7.6
  Background aperture counts = 13.9
  Rate = 0.001 +/- 0.0004

[Fri May  3 19:26:42 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 19:26:42 2013] Using photon index=1.80, rate=0.00183, arf fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src39.arf
[Fri May  3 19:26:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 19:26:42 2013] Updating source flux to 1.2e-14
[Fri May  3 19:26:53 2013] Source 39 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 19:26:56 2013] xmm0093550401/analysis//spectral/fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete