[Fri May  3 15:11:16 2013] Detection parameters:
  Position = (209.0, 396.0) = 23 34 12.67 -15 10 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.6 +/- 10.1
  Background counts = 12.9
  Rate = 0.002 +/- 0.0005

[Fri May  3 15:11:17 2013] Off-axis axis estimate = 9.60'
[Fri May  3 15:13:00 2013] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Fri May  3 15:13:00 2013] Initial guess for spatial extent in simple fitting = 11.23"
[Fri May  3 15:13:00 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Fri May  3 15:13:00 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 11.23"
[Fri May  3 15:59:16 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src20.ximg exists
[Fri May  3 15:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src20.csv
[Fri May  3 15:59:16 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri May  3 15:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src20.csv
[Fri May  3 15:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:59:17 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri May  3 15:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri May  3 15:59:17 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri May  3 15:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri May  3 15:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 16:45:13 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.915153 pixels away
[Fri May  3 16:45:13 2013] Vigneting correction estimate = 1.000000
[Fri May  3 16:45:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 16:45:13 2013] Assessing source extent using major
[Fri May  3 16:45:13 2013] Source does appear to be extended
[Fri May  3 16:45:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 16:45:28 2013] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:45:28 2013] Initial guess for spatial extent in simple fitting = 11.23"
[Fri May  3 16:45:28 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Fri May  3 16:45:28 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.23"
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src19.ximg exists
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May  3 17:27:47 2013] Fit fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src19 appears to have run properly
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May  3 17:27:47 2013] Fit fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri May  3 18:17:20 2013] Spatial fit model total counts = 142.584000, observed total counts = 133.000000
[Fri May  3 18:17:20 2013] Offset between fit and detection position for source 20 = 0.145759 pixels
[Fri May  3 18:17:20 2013] 138.318700 total counts/ 96.089900 bgd. counts: snr = 4.307942
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.145759 pixels
  Position = (209.1, 396.1) = 23 34 12.64 -15 10 58.9
  Extent = 8.5 (5.5-11.8)" x 4.8 (3.1-7.6)", rotation angle = 137 (230-88) degrees
  Source counts = 42.2 +/- 11.8
  Background counts = 96.1
  Rate = 0.002 +/- 0.0006
[Fri May  3 18:17:20 2013] Vigneting correction estimate = 1.000000
[Fri May  3 18:17:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 18:17:20 2013] Assessing source extent using major axis lower bound
[Fri May  3 18:17:20 2013] Source does appear to be extended
[Fri May  3 18:17:20 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73
[Fri May  3 18:17:36 2013] XMMSAS src. selection expression = ellipse(18141.440460, 34415.139600, 510.927015, 289.521608, 137.352073, X, Y)
[Fri May  3 18:17:36 2013] Writing source region out to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src20_src.reg
[Fri May  3 18:17:36 2013] Extracting stamp from image fullrun_pn_xmm0093550401_pi300-10000_cl_sm2.00.img.gz, (180, 367) - (238, 425)
[Fri May  3 18:17:36 2013] XMMSAS bgd. selection expression = annulus(18141.440460, 34415.139600, 851.545025, 1703.090049, X, Y) && !ellipse(19684.852360, 34013.835200, 655.639219, 354.212010, 332.773700, X, Y)
[Fri May  3 18:17:36 2013] Writing fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src20.gif
[Fri May  3 18:30:03 2013] Mean detx,y = (-11206.83, -3978.16) 
[Fri May  3 18:30:05 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 18:30:20 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 18:30:20 2013] Setting source spectrum file to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri May  3 18:30:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri May  3 18:54:47 2013] Not generating rmf since there are only 42 counts
[Fri May  3 18:54:47 2013] rmf not generated due to insufficient counts
[Fri May  3 19:26:36 2013] Updating aperture counts using extracted products
[Fri May  3 19:26:36 2013] Total counts from fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 58.00
[Fri May  3 19:26:36 2013] Total counts from fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src20_bgd.pi.gz = 424.00
[Fri May  3 19:26:36 2013] Got source and background scale factors 419481.000000, 5923508.000000
[Fri May  3 19:26:36 2013] User source parameters:
  Position = (209.1, 396.1) = 23 34 12.64 -15 10 58.9
  Extent = 8.5 (5.5-11.8)" x 4.8 (3.1-7.6)", rotation angle = 137 (230-88) degrees
  Source aperture counts = 28.0 +/- 8.7
  Background aperture counts = 30.0
  Rate = 0.001 +/- 0.0004

[Fri May  3 19:26:41 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 19:26:41 2013] Using photon index=1.80, rate=0.00212, arf fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src20.arf
[Fri May  3 19:26:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 19:26:41 2013] Updating source flux to 1.5e-14
[Fri May  3 19:26:53 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 19:26:56 2013] xmm0093550401/analysis//spectral/fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete