[Fri May  3 15:11:16 2013] Detection parameters:
  Position = (327.2, 405.1) = 23 33 37.13 -15 10 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.0 +/- 9.5
  Background counts = 13.4
  Rate = 0.005 +/- 0.0009

[Fri May  3 15:11:17 2013] Off-axis axis estimate = 8.01'
[Fri May  3 15:13:00 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Fri May  3 15:13:00 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Fri May  3 15:13:00 2013] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.982
[Fri May  3 15:13:00 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.43"
[Fri May  3 15:59:16 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src19.ximg exists
[Fri May  3 15:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src19.csv
[Fri May  3 15:59:16 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri May  3 15:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src19.csv
[Fri May  3 15:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:59:17 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri May  3 15:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May  3 15:59:17 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri May  3 15:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May  3 15:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 16:45:13 2013] Warning, spatial fit 19 centroid is now closest to src. 17
[Fri May  3 16:45:13 2013] Vigneting correction estimate = 1.000000
[Fri May  3 16:45:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 16:45:13 2013] Assessing source extent using major
[Fri May  3 16:45:13 2013] Source does appear to be extended
[Fri May  3 16:45:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 16:45:28 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:45:28 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Fri May  3 16:45:28 2013] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.982
[Fri May  3 16:45:28 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 10.43"
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src18.ximg exists
[Fri May  3 17:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src18.csv
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May  3 17:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src18.csv
[Fri May  3 17:27:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May  3 17:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May  3 17:27:47 2013] fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May  3 17:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May  3 17:27:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 18:17:20 2013] Spatial fit model total counts = 317.210000, observed total counts = 194.000000
[Fri May  3 18:17:20 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 18:17:20 2013] Vigneting correction estimate = 1.000000
[Fri May  3 18:17:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 18:17:20 2013] Assessing source extent using major
[Fri May  3 18:17:20 2013] Source does appear to be extended
[Fri May  3 18:17:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 18:17:36 2013] XMMSAS src. selection expression = ellipse(28421.660583, 35198.070618, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 18:17:36 2013] Writing source region out to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src19_src.reg
[Fri May  3 18:17:36 2013] Extracting stamp from image fullrun_pn_xmm0093550401_pi300-10000_cl_sm2.00.img.gz, (290, 368) - (365, 443)
[Fri May  3 18:17:36 2013] XMMSAS bgd. selection expression = annulus(28421.660583, 35198.070618, 1087.500000, 2175.000000, X, Y) && !ellipse(29877.741424, 36838.900946, 441.825613, 225.263206, 359.385712, X, Y) && !ellipse(28881.299255, 35848.998840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.292200, 32623.918600, 453.216813, 453.216813, 0.000000, X, Y)
[Fri May  3 18:17:36 2013] Writing fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src19.gif
[Fri May  3 18:29:28 2013] Mean detx,y = (-1698.48, -8125.84) 
[Fri May  3 18:29:31 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 18:29:52 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 18:29:52 2013] Setting source spectrum file to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri May  3 18:29:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri May  3 18:54:29 2013] Not generating rmf since there are only 48 counts
[Fri May  3 18:54:29 2013] rmf not generated due to insufficient counts
[Fri May  3 19:26:36 2013] Updating aperture counts using extracted products
[Fri May  3 19:26:36 2013] Total counts from fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 143.00
[Fri May  3 19:26:36 2013] Total counts from fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src19_bgd.pi.gz = 535.00
[Fri May  3 19:26:36 2013] Got source and background scale factors 1108459.000000, 7983620.000000
[Fri May  3 19:26:36 2013] User source parameters:
  Position = (327.2, 405.1) = 23 33 37.13 -15 10 18.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 68.7 +/- 13.0
  Background aperture counts = 74.3
  Rate = 0.003 +/- 0.0007

[Fri May  3 19:26:36 2013] Updating counts from extracted products
[Fri May  3 19:26:36 2013] Set source signif. to 68.72/8.62 = 7.97
[Fri May  3 19:26:41 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 19:26:41 2013] Using photon index=1.80, rate=0.00345, arf fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src19.arf
[Fri May  3 19:26:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 19:26:41 2013] Updating source flux to 1.8e-14
[Fri May  3 19:26:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  3 19:26:56 2013] xmm0093550401/analysis//spectral/fullrun_pn_xmm0093550401_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete