[Fri May  3 15:11:59 2013] Detection parameters:
  Position = (256.7, 246.0) = 23 33 58.34 -15 21 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.8 +/- 6.0
  Background counts = 5.0
  Rate = 0.001 +/- 0.0004

[Fri May  3 15:11:59 2013] Off-axis axis estimate = 4.86'
[Fri May  3 16:19:05 2013] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:19:05 2013] Initial guess for spatial extent in simple fitting = 8.86"
[Fri May  3 16:19:05 2013] source mask rpix=2.0, npix_max = 25, mask sum = 29, frac = 1.127
[Fri May  3 16:19:05 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.86"
[Fri May  3 16:45:05 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_src24.ximg exists
[Fri May  3 16:45:05 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May  3 16:45:05 2013] Fit fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_src24 appears to have run properly
[Fri May  3 16:45:05 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May  3 16:45:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May  3 16:45:05 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May  3 16:45:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May  3 16:45:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 16:45:18 2013] Spatial fit model total counts = 69.428100, observed total counts = 65.000000
[Fri May  3 16:45:18 2013] Offset between fit and detection position for source 21 = 0.923466 pixels
[Fri May  3 16:45:18 2013] 65.943000 total counts/ 38.907200 bgd. counts: snr = 4.334353
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.923466 pixels
  Position = (257.5, 245.6) = 23 33 58.09 -15 21 53.8
  Extent = 13.4 (8.5-17.7)" x 4.2 (2.7-8.6)", rotation angle = 14 (359-33) degrees
  Source counts = 27.0 +/- 8.1
  Background counts = 38.9
  Rate = 0.001 +/- 0.0004
[Fri May  3 16:45:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 16:45:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 16:45:18 2013] Assessing source extent using major axis lower bound
[Fri May  3 16:45:18 2013] Source does appear to be extended
[Fri May  3 16:45:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri May  3 17:49:11 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 17:49:11 2013] Initial guess for spatial extent in simple fitting = 8.82"
[Fri May  3 17:49:11 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978
[Fri May  3 17:49:11 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 8.82"
[Fri May  3 18:17:11 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src23.ximg exists
[Fri May  3 18:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src23.csv
[Fri May  3 18:17:11 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May  3 18:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src23.csv
[Fri May  3 18:17:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 18:17:11 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May  3 18:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May  3 18:17:11 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May  3 18:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May  3 18:17:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 18:17:28 2013] Spatial fit model total counts = 77.120500, observed total counts = 68.000000
[Fri May  3 18:17:28 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 18:17:28 2013] Vigneting correction estimate = 1.000000
[Fri May  3 18:17:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 18:17:28 2013] Assessing source extent using major axis lower bound
[Fri May  3 18:17:28 2013] Source does appear to be extended
[Fri May  3 18:17:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri May  3 19:15:11 2013] XMMSAS src. selection expression = ellipse(22357.484800, 21318.860600, 805.080023, 253.791007, 14.422500, X, Y)
[Fri May  3 19:15:11 2013] Writing source region out to fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src21_src.reg
[Fri May  3 19:15:11 2013] Extracting stamp from image fullrun_mos2_xmm0093550401_pi300-10000_cl_sm2.00.img.gz, (211, 199) - (304, 292)
[Fri May  3 19:15:11 2013] XMMSAS bgd. selection expression = annulus(22357.484800, 21318.860600, 1341.800039, 2683.600077, X, Y) && !ellipse(21319.321808, 22555.468933, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 19:15:11 2013] Writing fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src21.gif
[Fri May  3 19:20:09 2013] Mean detx,y = (3013.41, -7182.33) 
[Fri May  3 19:20:10 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 19:20:26 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 19:20:26 2013] Setting source spectrum file to fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May  3 19:20:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri May  3 19:25:49 2013] Not generating rmf since there are only 27 counts
[Fri May  3 19:25:49 2013] rmf not generated due to insufficient counts
[Fri May  3 19:26:48 2013] Updating aperture counts using extracted products
[Fri May  3 19:26:48 2013] Total counts from fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 39.00
[Fri May  3 19:26:48 2013] Total counts from fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src21_bgd.pi.gz = 377.00
[Fri May  3 19:26:48 2013] Got source and background scale factors 537246.000000, 14395723.000000
[Fri May  3 19:26:48 2013] User source parameters:
  Position = (257.5, 245.6) = 23 33 58.09 -15 21 53.8
  Extent = 13.4 (8.5-17.7)" x 4.2 (2.7-8.6)", rotation angle = 14 (359-33) degrees
  Source aperture counts = 24.9 +/- 7.3
  Background aperture counts = 14.1
  Rate = 0.001 +/- 0.0003

[Fri May  3 19:26:49 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 19:26:49 2013] Using photon index=1.80, rate=0.00121, arf fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src21.arf
[Fri May  3 19:26:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 19:26:49 2013] Updating source flux to 2.2e-14
[Fri May  3 19:26:52 2013] Flag p found in src. 21 procflags, skipping spectral fitting
[Fri May  3 19:26:52 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 19:26:53 2013] xmm0093550401/analysis//spectral/fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete