[Fri May  3 15:11:59 2013] Detection parameters:
  Position = (474.3, 339.9) = 23 32 52.94 -15 15 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.7 +/- 9.6
  Background counts = 4.4
  Rate = 0.003 +/- 0.0004

[Fri May  3 15:11:59 2013] Off-axis axis estimate = 13.10'
[Fri May  3 16:19:05 2013] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:19:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 16:19:05 2013] Initial guess for spatial extent in simple fitting = 12.98"
[Fri May  3 16:19:05 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.865
[Fri May  3 16:19:05 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 12.98"
[Fri May  3 16:45:05 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_src15.ximg exists
[Fri May  3 16:45:05 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri May  3 16:45:05 2013] Fit fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_src15 appears to have run properly
[Fri May  3 16:45:05 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri May  3 16:45:05 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri May  3 16:45:05 2013] Fit fullrun_mos2_xmm0093550401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri May  3 16:45:18 2013] Spatial fit model total counts = 107.785000, observed total counts = 101.000000
[Fri May  3 16:45:18 2013] Offset between fit and detection position for source 13 = 0.234948 pixels
[Fri May  3 16:45:18 2013] 107.619500 total counts/ 59.580800 bgd. counts: snr = 6.223549
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.234948 pixels
  Position = (474.1, 339.7) = 23 32 52.99 -15 15 4.2
  Extent = 10.7 (8.0-13.8)" x 4.4 (3.2-6.4)", rotation angle = 51 (37-69) degrees
  Source counts = 48.0 +/- 10.4
  Background counts = 59.6
  Rate = 0.002 +/- 0.0005
[Fri May  3 16:45:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 16:45:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 16:45:18 2013] Assessing source extent using major axis lower bound
[Fri May  3 16:45:18 2013] Source does appear to be extended
[Fri May  3 16:45:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Fri May  3 17:49:11 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 17:49:11 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Fri May  3 17:49:11 2013] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.950
[Fri May  3 17:49:11 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 7.55"
[Fri May  3 18:17:11 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src14.ximg exists
[Fri May  3 18:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src14.csv
[Fri May  3 18:17:11 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri May  3 18:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src14.csv
[Fri May  3 18:17:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 18:17:11 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri May  3 18:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May  3 18:17:11 2013] fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri May  3 18:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May  3 18:17:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093550401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 18:17:28 2013] Warning, spatial fit 14 centroid is now closest to src. 5
[Fri May  3 18:17:28 2013] Vigneting correction estimate = 1.000000
[Fri May  3 18:17:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 18:17:28 2013] Assessing source extent using major axis lower bound
[Fri May  3 18:17:28 2013] Source does appear to be extended
[Fri May  3 18:17:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Fri May  3 19:15:10 2013] XMMSAS src. selection expression = ellipse(41198.932040, 29503.237200, 644.298019, 261.996008, 50.749844, X, Y)
[Fri May  3 19:15:10 2013] Writing source region out to fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src13_src.reg
[Fri May  3 19:15:10 2013] Extracting stamp from image fullrun_mos2_xmm0093550401_pi300-10000_cl_sm2.00.img.gz, (437, 303) - (511, 377)
[Fri May  3 19:15:10 2013] XMMSAS bgd. selection expression = annulus(41198.932040, 29503.237200, 1073.830031, 2147.660062, X, Y)
[Fri May  3 19:15:10 2013] Writing fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src13.gif
[Fri May  3 19:18:02 2013] Mean detx,y = (-11971.08, 6917.69) 
[Fri May  3 19:18:03 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 19:18:25 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 19:18:25 2013] Setting source spectrum file to fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May  3 19:18:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May  3 19:25:04 2013] Not generating rmf since there are only 48 counts
[Fri May  3 19:25:04 2013] rmf not generated due to insufficient counts
[Fri May  3 19:26:47 2013] Updating aperture counts using extracted products
[Fri May  3 19:26:47 2013] Total counts from fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 49.00
[Fri May  3 19:26:47 2013] Total counts from fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 227.00
[Fri May  3 19:26:47 2013] Got source and background scale factors 426822.000000, 8994167.000000
[Fri May  3 19:26:47 2013] User source parameters:
  Position = (474.1, 339.7) = 23 32 52.99 -15 15 4.2
  Extent = 10.7 (8.0-13.8)" x 4.4 (3.2-6.4)", rotation angle = 51 (37-69) degrees
  Source aperture counts = 38.2 +/- 8.1
  Background aperture counts = 10.8
  Rate = 0.002 +/- 0.0004

[Fri May  3 19:26:49 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 19:26:49 2013] Using photon index=1.80, rate=0.00215, arf fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src13.arf
[Fri May  3 19:26:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 19:26:49 2013] Updating source flux to 6.6e-14
[Fri May  3 19:26:52 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 19:26:53 2013] xmm0093550401/analysis//spectral/fullrun_mos2_xmm0093550401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete