[Mon Sep  3 21:57:13 2012] Detection parameters:
  Position = (304.0, 219.0) = 12 58 45.29 -1 49 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.6 +/- 29.4
  Background counts = 265.0
  Rate = 0.008 +/- 0.001

[Mon Sep  3 21:57:13 2012] Off-axis axis estimate = 5.77'
[Mon Sep  3 22:01:18 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 22:01:18 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Mon Sep  3 22:01:18 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.290
[Mon Sep  3 22:01:18 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 9.31"
[Tue Sep  4 02:08:45 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src75.ximg exists
[Tue Sep  4 02:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src75.csv
[Tue Sep  4 02:08:45 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src75_1.ximg exists
[Tue Sep  4 02:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src75.csv
[Tue Sep  4 02:08:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 02:08:47 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Tue Sep  4 02:08:47 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Tue Sep  4 02:08:47 2012] Fit fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Tue Sep  4 05:11:40 2012] Warning, spatial fit 75 centroid is now closest to src. 81
[Tue Sep  4 05:11:40 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 05:11:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 05:11:40 2012] Assessing source extent using major
[Tue Sep  4 05:11:40 2012] Source does appear to be extended
[Tue Sep  4 05:11:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 05:11:40 2012] Source is confused with source 43
[Tue Sep  4 05:12:14 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 05:12:14 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Tue Sep  4 05:12:14 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.290
[Tue Sep  4 05:12:14 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 9.31"
[Tue Sep  4 07:26:57 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src55.ximg exists
[Tue Sep  4 07:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src55.csv
[Tue Sep  4 07:26:57 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src55_1.ximg exists
[Tue Sep  4 07:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src55.csv
[Tue Sep  4 07:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 07:26:58 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Tue Sep  4 07:26:58 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Tue Sep  4 07:26:58 2012] Fit fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Tue Sep  4 09:12:56 2012] Spatial fit model total counts = 3135.710000, observed total counts = 5679.000000
[Tue Sep  4 09:12:56 2012] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 09:12:56 2012] Warning, spatial fit 55 centroid is now closest to src. 81
[Tue Sep  4 09:12:56 2012] Spatial fit model total counts = 7447.860000, observed total counts = 6983.000000
[Tue Sep  4 09:12:56 2012] Offset between fit and detection position for source 78 = 4.366448 pixels
[Tue Sep  4 09:12:56 2012] Warning, changing simple spatial fit ID from 55 to 56
[Tue Sep  4 09:12:56 2012] 7524.788000 total counts/ 7079.770000 bgd. counts: snr = 5.288932
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 4.366448 pixels
  Position = (302.1, 222.9) = 12 58 45.84 -1 48 43.9
  Extent = 35.8 (9.9-71.7)" x 20.4 (4.5-35.8)", rotation angle = 90
  Source counts = 445.0 +/- 86.7
  Background counts = 7079.8
  Rate = 0.01 +/- 0.002
[Tue Sep  4 09:12:56 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 09:12:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 09:12:56 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 09:12:56 2012] Source does appear to be extended
[Tue Sep  4 09:12:56 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.28
[Tue Sep  4 09:13:19 2012] XMMSAS src. selection expression = ellipse(26235.948000, 19347.770000, 2150.736062, 1221.912035, 90.000000, X, Y)
[Tue Sep  4 09:13:19 2012] Writing source region out to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src78_src.reg
[Tue Sep  4 09:13:19 2012] Extracting stamp from image fullrun_pn_xmm0093200101_pi300-10000_cl_sm2.00.img.gz, (179, 99) - (426, 347)
[Tue Sep  4 09:13:19 2012] XMMSAS bgd. selection expression = annulus(26235.948000, 19347.770000, 3584.560103, 7169.120206, X, Y) && !ellipse(27525.951140, 22982.865200, 3765.600108, 3765.600108, 0.000000, X, Y) && !ellipse(27423.173096, 24237.076874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20075.355446, 19590.196669, 527.567273, 462.306910, 50.186578, X, Y) && !ellipse(27271.170013, 13034.324127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25028.150800, 26142.508400, 426.578412, 407.506412, 0.000000, X, Y) && !ellipse(28238.591003, 24641.026306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19983.483643, 16661.569397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32359.398254, 26422.104919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29725.942000, 25604.084000, 282.869608, 282.869608, 0.000000, X, Y) && !ellipse(29217.688812, 24194.713226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.958000, 22982.312000, 692.743220, 692.743220, 0.000000, X, Y) && !ellipse(25570.079468, 22030.227142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29925.824951, 22250.987518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25828.618256, 21501.328049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29322.730000, 20874.154000, 450.480813, 450.480813, 0.000000, X, Y) && !ellipse(27257.780701, 26752.085236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29061.076599, 26321.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26340.922000, 24370.078000, 1100.840032, 1100.840032, 0.000000, X, Y) && !ellipse(29977.948486, 24389.756989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.861847, 24305.287231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25110.419556, 21358.199402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25846.752106, 20917.088852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.193787, 19969.223480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28083.417816, 27071.721558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30140.107056, 22756.093567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24667.481018, 21784.400635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.513855, 20141.234863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.983856, 19549.004028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26961.511292, 19162.475571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27516.515961, 27268.204346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28671.960815, 27277.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29019.166962, 26829.553680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.781677, 26644.394592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30202.972839, 25856.724396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24729.462000, 24899.724000, 2261.792065, 525.765615, 89.900879, X, Y) && !ellipse(24027.656128, 23275.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24873.033386, 20311.917404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25511.636963, 19614.620422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25735.211670, 19188.347504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28070.779877, 19352.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.092400, 18346.332000, 1490.336043, 1490.336043, 0.000000, X, Y) && !ellipse(19741.822876, 13414.165894, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 09:13:19 2012] Writing fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src78.gif
[Tue Sep  4 10:01:05 2012] Mean detx,y = (1240.16, -4218.41) 
[Tue Sep  4 10:01:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 10:02:11 2012] grppha failed
[Tue Sep  4 10:02:11 2012] Setting source spectrum file to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src78_src.pi.gz
[Tue Sep  4 10:02:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Tue Sep  4 10:53:50 2012] Updating aperture counts using extracted products
[Tue Sep  4 10:53:51 2012] Error reading totcts from fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src78_src.pi.gz
[Tue Sep  4 10:53:51 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 10:53:59 2012] Flag p found in src. 78 procflags, skipping spectral fitting
[Tue Sep  4 10:53:59 2012] Flag c found in src. 78 procflags, skipping spectral fitting
[Tue Sep  4 10:53:59 2012] Source 78 has no response, skipping
[Tue Sep  4 10:54:00 2012] xmm0093200101/analysis//spectral/fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src78_pl.csv not found, spectral fit skipped or did not complete