[Mon Sep  3 21:57:13 2012] Detection parameters:
  Position = (342.0, 220.8) = 12 58 34.28 -1 48 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.4 +/- 22.0
  Background counts = 206.8
  Rate = 0.004 +/- 0.0009

[Mon Sep  3 21:57:13 2012] Off-axis axis estimate = 6.46'
[Mon Sep  3 22:01:18 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 22:01:18 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Mon Sep  3 22:01:18 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Mon Sep  3 22:01:18 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 9.66"
[Tue Sep  4 02:08:45 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src71.ximg exists
[Tue Sep  4 02:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src71.csv
[Tue Sep  4 02:08:45 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src71_1.ximg exists
[Tue Sep  4 02:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src71.csv
[Tue Sep  4 02:08:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 02:08:47 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Tue Sep  4 02:08:47 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Tue Sep  4 02:08:47 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Tue Sep  4 02:08:47 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Tue Sep  4 02:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 05:11:40 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 11.443892 pixels away
[Tue Sep  4 05:11:40 2012] Warning, spatial fit 71 centroid is now closest to src. 76
[Tue Sep  4 05:11:40 2012] Spatial fit model total counts = 2275.260000, observed total counts = 2008.000000
[Tue Sep  4 05:11:40 2012] Poor agreement between spatial fit and data for source 74
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 05:11:40 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 05:11:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 05:11:40 2012] Assessing source extent using major
[Tue Sep  4 05:11:40 2012] Source does appear to be extended
[Tue Sep  4 05:11:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 05:11:40 2012] Deleting source due to low Poisson probability 0.9