[Mon Sep 3 21:57:12 2012] Detection parameters: Position = (316.6, 225.3) = 12 58 41.63 -1 48 35.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 218.2 +/- 29.7 Background counts = 295.8 Rate = 0.008 +/- 0.001 [Mon Sep 3 21:57:13 2012] Off-axis axis estimate = 5.47' [Mon Sep 3 22:01:17 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting [Mon Sep 3 22:01:17 2012] Initial guess for spatial extent in simple fitting = 9.16" [Mon Sep 3 22:01:17 2012] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.847 [Mon Sep 3 22:01:17 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 9.16" [Tue Sep 4 02:08:44 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src39.ximg exists [Tue Sep 4 02:08:44 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src39_1.ximg exists [Tue Sep 4 02:08:44 2012] Fit fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src39 appears to have run properly [Tue Sep 4 02:08:46 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists [Tue Sep 4 02:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src39.csv [Tue Sep 4 02:08:46 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists [Tue Sep 4 02:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src39.csv [Tue Sep 4 02:08:46 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 05:11:40 2012] Warning, spatial fit 39 centroid is now closest to src. 32 [Tue Sep 4 05:11:40 2012] Source 42 is offset by 2.731516 and -3.918620 pixels which is larger than 2 X fitted extent = 2.465798 x 2.465798, not incorporating fit results [Tue Sep 4 05:11:40 2012] Source 42 is offset by -3.807749 and -4.326643 pixels which is larger than 2 X fitted extent = 3.524676 x 3.524676, not incorporating fit results [Tue Sep 4 05:11:40 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 05:11:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 05:11:40 2012] Assessing source extent using major [Tue Sep 4 05:11:40 2012] Source does appear to be extended [Tue Sep 4 05:11:40 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 05:11:40 2012] Source is confused with source 77 [Tue Sep 4 05:12:14 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting [Tue Sep 4 05:12:14 2012] Initial guess for spatial extent in simple fitting = 9.16" [Tue Sep 4 05:12:14 2012] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.847 [Tue Sep 4 05:12:14 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 9.16" [Tue Sep 4 07:26:57 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src36.ximg exists [Tue Sep 4 07:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src36.csv [Tue Sep 4 07:26:57 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src36_1.ximg exists [Tue Sep 4 07:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src36.csv [Tue Sep 4 07:26:57 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src36_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 07:26:58 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists [Tue Sep 4 07:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src36.csv [Tue Sep 4 07:26:58 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists [Tue Sep 4 07:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src36.csv [Tue Sep 4 07:26:58 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 09:12:56 2012] Source 42 is offset by 0.002221 and -8.770413 pixels which is larger than 2 X fitted extent = 8.340414 x 8.340414, not incorporating fit results [Tue Sep 4 09:12:56 2012] Source 42 is offset by 2.676711 and -3.778919 pixels which is larger than 2 X fitted extent = 2.395835 x 2.395835, not incorporating fit results [Tue Sep 4 09:12:56 2012] Source 42 is offset by -3.864576 and -4.154528 pixels which is larger than 2 X fitted extent = 3.202625 x 3.202625, not incorporating fit results [Tue Sep 4 09:12:56 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 09:12:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 09:12:56 2012] Assessing source extent using major [Tue Sep 4 09:12:56 2012] Source does appear to be extended [Tue Sep 4 09:12:56 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 09:13:18 2012] XMMSAS src. selection expression = ellipse(27497.983856, 19549.004028, 652.500000, 652.500000, 0.000000, X, Y) [Tue Sep 4 09:13:18 2012] Writing source region out to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src42_src.reg [Tue Sep 4 09:13:18 2012] Extracting stamp from image fullrun_pn_xmm0093200101_pi300-10000_cl_sm2.00.img.gz, (279, 188) - (354, 263) [Tue Sep 4 09:13:18 2012] XMMSAS bgd. selection expression = annulus(27497.983856, 19549.004028, 1087.500000, 2175.000000, X, Y) && !ellipse(27525.951140, 22982.865200, 3765.600108, 3765.600108, 0.000000, X, Y) && !ellipse(25570.079468, 22030.227142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29925.824951, 22250.987518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25828.618256, 21501.328049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29322.730000, 20874.154000, 450.480813, 450.480813, 0.000000, X, Y) && !ellipse(25110.419556, 21358.199402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25846.752106, 20917.088852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.193787, 19969.223480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24667.481018, 21784.400635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.513855, 20141.234863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26961.511292, 19162.475571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24873.033386, 20311.917404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25511.636963, 19614.620422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25735.211670, 19188.347504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28070.779877, 19352.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26235.948000, 19347.770000, 2867.648083, 1629.216047, 90.000000, X, Y) && !ellipse(26482.092400, 18346.332000, 1490.336043, 1490.336043, 0.000000, X, Y) [Tue Sep 4 09:13:18 2012] Writing fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src42.gif [Tue Sep 4 09:51:54 2012] Mean detx,y = (104.24, -4895.93) [Tue Sep 4 09:51:57 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 09:52:11 2012] grppha failed [Tue Sep 4 09:52:12 2012] Setting source spectrum file to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src42_src.pi.gz [Tue Sep 4 09:52:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src42_bgd.pi.gz [Tue Sep 4 10:04:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Sep 4 10:04:27 2012] rmf not generated due to insufficient counts [Tue Sep 4 10:53:49 2012] Updating aperture counts using extracted products [Tue Sep 4 10:53:49 2012] Error reading totcts from fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src42_src.pi.gz [Tue Sep 4 10:53:51 2012] No arf file for this source, not re-computing flux [Tue Sep 4 10:53:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Sep 4 10:54:00 2012] xmm0093200101/analysis//spectral/fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete